Results 1 to 14 of 14

Monitor auction

| Auction Talk
  1. #1
    Swampy started this thread.
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts

    Monitor auction

    I just checked back on a lot of monitors out of curiosity to see where the bidding stood. This was for 137 monitors (15" - 20"), "operational condition unknown. The high bid is at $401.00, or roughly $2.93 per unit. What would be the goal here? Hoping many of them would test ok and resell? $3 / unit plus time and handling seems a gamble.

    Anyway, just curious.

  2. The Following User Says Thank You to Swampy for This Post:



  3. #2
    AuburnEwaste's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Metro Detroit
    Posts
    773
    Thanks
    32
    Thanked 976 Times in 413 Posts
    There are buyers here paying 5-6.00 for 17" and up LCD monitors. I would imagine they are making at least a few bucks each on them, putting the value at 7-8 each for the larger recycler they ultimately go to. That leaves a lot of room for profit.

  4. The Following 2 Users say Thank You for This Post by AuburnEwaste:


  5. #3
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    TEST newer larger monitors then re-sell...........Send all excess to recyclers..........Easy money

  6. The Following 3 Users say Thank You for This Post by mikeinreco:


  7. #4
    Swampy started this thread.
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    That makes sense. I guess it would come down to overall costs involved (purchase price, handling, shipping, etc.). Some of the buyers for these (that I have checked) have indicated certain conditions in which they will take them, so I just wasn't sure about paying $3 apiece unless there was an option of hoping to sell working units.

    Thanks for the insight.

  8. The Following User Says Thank You to Swampy for This Post:


  9. #5
    pascoEscraper's Avatar
    SMF Badges of Honor

    Member since
    Dec 2015
    Location
    pasco county florida
    Posts
    27
    Thanks
    0
    Thanked 28 Times in 14 Posts
    I was watching a couple auctions for desk top computers. they went off at over twenty thousand for almost seven hundred units. the description said unknown condition and most had hard drives removed. why someone would ride the prices like that. that comes out apx $25. per unit plus a hard drive and time to service and update each. its crazy. used desk tops here in my area are selling from $60. and up…

  10. The Following 2 Users say Thank You for This Post by pascoEscraper:


  11. #6
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Depends on model I have sold used desktop towers up to $300 depending on specs and model

  12. The Following User Says Thank You to mikeinreco for This Post:


  13. #7
    Swampy started this thread.
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    Yeah, I guess to me personally it just seems like you're buying "a pig in a poke" as the saying goes, hoping there are enough good pieces to come out. There must be something to that strategy because as pascoEscrapper noted, some of those lots go for big money. In fairness, though, I'm very low on the "repair / resell" scale right now, but hope to work in that direction in the future. Bottom line, it's good this stuff is going somewhere other than a landfill.


  14. #8
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    As you buy from different entities you will begin to see a pattern of the quality of merchandise...i have purchased from every govt institution within 100 miles and know what to expect from each one....the ones with stripped out low quality product do not get my business

  15. The Following 2 Users say Thank You for This Post by mikeinreco:


  16. #9
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    Governments are that way. For example, I'd purchase a retired car from the Wyoming state motor pool in a heartbeat, but I wouldn't touch one from the state of Montana. This is a similar case- especially in larger agencies where the IT staff is more likely to pull parts to keep as spares. You'll get them eventually- when they're obsolete. Some agencies are the exact opposite, sending complete, ready to refurbish machines out.

    The thing about refurbishing is that it's a world of it's own. I've sold laptops for $500 before, but you have to know what exactly you're looking at. You also have to make sure that the Operating System is properly licensed- a lot of the computers for sale online don't have legal, genuine software. That makes it harder for those of us that do refurbish as a business, but that's just how it is. Never buy a lot from a place you haven't dealt with before on the grounds that everything will work- you'll usually be wrong.

    There was a member on here a while back who posted results from an auction he attended. The computer refurbishers actually bought some items at prices that would be indicative of a loss, so there's not a lot of room there. Older desktops can't be sold online, because shipping and the cost of licensing Windows (Legally) would exceed what the computer could be sold for. Older desktops are primarily sold in retail environments, and those vary a lot.

    ----------------

    Now that I've derailed your thread (You can thank me later!), there are two buyers of screens on this forum. I've used one of them- IIRC, he would cover shipping if you had over $600 of monitors. The rate at that time was $6.00 per screen, so you can calculate backwards to see what bid would cover the cost of time and transportation (And, almost 17" or larger LCD monitor can be resold for more than scrap value). Most of my lot was test failures
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  17. The Following 2 Users say Thank You for This Post by matador:


  18. #10
    Swampy started this thread.
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    Quote Originally Posted by matador View Post
    Governments are that way. For example, I'd purchase a retired car from the Wyoming state motor pool in a heartbeat, but I wouldn't touch one from the state of Montana. This is a similar case- especially in larger agencies where the IT staff is more likely to pull parts to keep as spares. You'll get them eventually- when they're obsolete. Some agencies are the exact opposite, sending complete, ready to refurbish machines out.

    The thing about refurbishing is that it's a world of it's own. I've sold laptops for $500 before, but you have to know what exactly you're looking at. You also have to make sure that the Operating System is properly licensed- a lot of the computers for sale online don't have legal, genuine software. That makes it harder for those of us that do refurbish as a business, but that's just how it is. Never buy a lot from a place you haven't dealt with before on the grounds that everything will work- you'll usually be wrong.

    There was a member on here a while back who posted results from an auction he attended. The computer refurbishers actually bought some items at prices that would be indicative of a loss, so there's not a lot of room there. Older desktops can't be sold online, because shipping and the cost of licensing Windows (Legally) would exceed what the computer could be sold for. Older desktops are primarily sold in retail environments, and those vary a lot.

    ----------------

    Now that I've derailed your thread (You can thank me later!), there are two buyers of screens on this forum. I've used one of them- IIRC, he would cover shipping if you had over $600 of monitors. The rate at that time was $6.00 per screen, so you can calculate backwards to see what bid would cover the cost of time and transportation (And, almost 17" or larger LCD monitor can be resold for more than scrap value). Most of my lot was test failures
    Great info! Thanks. This (auctions) are just something I've been watching / checking out more seriously lately, but my mindset is still "scrap", so a lot of these prices surprise me. What you have said makes perfect sense. In this case, this appears to be from a college, and they advertise sales periodically. I've put in bids on a few things over the last few months, but bids blow past my limit in no time, telling me that there's likely something I'm missing out on. I'm not ready to pull the trigger on an expensive mistake just yet, so for me, it's hitting SMF for more info.

  19. The Following User Says Thank You to Swampy for This Post:


  20. #11
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Ill tell u what I also do....if I can get these monitors in quantity and cheap I will trade the working ones to local dealers and shops for there scrap

  21. The Following User Says Thank You to mikeinreco for This Post:


  22. #12
    Mudlucky's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Wisconsin
    Posts
    398
    Thanks
    230
    Thanked 484 Times in 194 Posts
    As long as these monitors are not cracked, bleeding, broken, scratched, cut cords or obviously waterlogged, several buyers on this forum pay good for them. At $3 each, plus shipping to you then shipping to the buyer, you'd come out ahead. You could always buy them and have them shipped to the buyer, if they will sort for you, and you basically get paid for being the middle guy that did the work to find the auction. Everyone wins.

  23. The Following User Says Thank You to Mudlucky for This Post:


  24. #13
    Deathhit02's Avatar
    SMF Badges of Honor

    Member since
    Feb 2017
    Posts
    17
    Thanks
    0
    Thanked 2 Times in 2 Posts
    I know of the lot you are posting about. Ended 3/3 3/4. A lot of them had i5 and better processors duel core up to i7 are going from 3.00 to 125.00 each. That if you were to scrap lot . Shred the mother and finger boards sell the processors ram . You could be in the mid thirtys for a return.

  25. #14
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,826
    Thanks
    2,917
    Thanked 4,837 Times in 1,877 Posts
    Quote Originally Posted by Deathhit02 View Post
    I know of the lot you are posting about. Ended 3/3 3/4. A lot of them had i5 and better processors duel core up to i7 are going from 3.00 to 125.00 each. That if you were to scrap lot . Shred the mother and finger boards sell the processors ram . You could be in the mid thirtys for a return.
    Swampy was talking about 137 monitors. Different lot.


  26. Similar threads on the Scrap Metal Forum

    1. monitor
      By hunterandscrapper in forum General - Let's talk business
      Replies: 4
      Last Post: 04-14-2014, 12:57 AM
    2. tv/monitor boards help
      By TheRecycleGuy in forum General Electronics Recycling
      Replies: 17
      Last Post: 08-04-2013, 02:13 AM
    3. CRT Monitor assay
      By slaghunter in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 16
      Last Post: 12-13-2012, 01:54 AM
    4. LCD Monitor tear down
      By street_sweeper in forum General Electronics Recycling
      Replies: 8
      Last Post: 02-11-2012, 03:53 PM
    5. monitor $ break down
      By EcoSafe in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 35
      Last Post: 10-07-2011, 01:46 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook