Results 1 to 11 of 11
  1. #1
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts

    What does your yard consider a "complete" desktop?

    I found a local yard that recently started accepting "complete" desktop towers for $0.20/lb. I am trying to decide if I should continue stripping the computers that I get or sell them to this yard. In part it depends on what they consider a "complete" tower. When I called them I could not get a straightforward answer, but surely they must inspect them somehow otherwise they run the risk of getting a lot of empty steel cases. I will make a trip there one day to try to find out but I am still curious what your yard considers a complete desktop. What if RAM is missing? Or CPU? Or the power supply? Where does your yard draw the line? Thx



  2. #2
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    I do a little bit of buying and to me complete means complete. Hasn't been messed with. There are certain "tells" i look for and if things don't look right i start deducting for missing pieces.

  3. The Following User Says Thank You to Scrappah for This Post:


  4. #3
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    ram cpu power supply motherboard hd = complete in my book

  5. The Following 4 Users say Thank You for This Post by mikeinreco:


  6. #4
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,758
    Thanks
    6,037
    Thanked 5,910 Times in 2,556 Posts
    I wonder if they are just looking at the outside for a power cord?

  7. #5
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    IDK ...missing finger (video) cards and optical drives can be a pain if they're been yanked. All depends on if the computer is going straight to scrap is or is a possible candidate for a refurb.

    Traditionally, i was able to pay more for any scrap computer because i knew a small percentage could be refurbished.

  8. The Following User Says Thank You to Scrappah for This Post:


  9. #6
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Quote Originally Posted by Scrappah View Post
    IDK ...missing finger (video) cards and optical drives can be a pain if they're been yanked. All depends on if the computer is going straight to scrap is or is a possible candidate for a refurb.

    Traditionally, i was able to pay more for any scrap computer because i knew a small percentage could be refurbished.
    I didn't think about the drives and finger cards.......Mostly what I see pulled is the memory (I guess its easy to pull and doesn't take up alot of space).........Dvd drives are fairly common at least for me

  10. #7
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    I think at .20 that you'll only make between $ 4.00 and $5.00 average, and I think teardown value is still $8.00 to $10.00. Just my opinion,,,
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  11. The Following 3 Users say Thank You for This Post by Mechanic688:


  12. #8
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    I see a variety of things. Even if a computer is going straight to scrap, pulling the drives & finger cards devalues it. It lowers the overall average yield that i'll see over fifty or a hundred that get scrapped out.

    <sigh> That means i can't always pay as much per unit to the guys that bring them in. About all i can do is pay based on what is there. It sucks for them because they don't know what to expect. It sucks for me because now i have to be nitpickey about the details.

  13. The Following User Says Thank You to Scrappah for This Post:


  14. #9
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    What can you do, though?

    Our yard just has an "E-Waste/Appliance" category, so I can't help you too much. As for me, complete means complete.

    Of course, you'll be amazed how many computers come with only one stick of RAM!
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  15. The Following 2 Users say Thank You for This Post by matador:


  16. #10
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    I had a dude tell me he would sell me complete desktops.. I opened them up and the HD and RAM were Completely gone..
    I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!

  17. #11
    Mudlucky's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Wisconsin
    Posts
    398
    Thanks
    230
    Thanked 484 Times in 194 Posts
    I buy a lot of complete and incomplete desktops. Complete means complete means complete. If it is missing anything, it is incomplete. I do a fair amount of training for our local yards. I had to teach them that. They finally listened when I told them the difference in what I would pay. I literally had to open the computer and show them the difference in between complete and incomplete. Well, I had to teach them what the parts were. Most recycling yards are metals yards. Ewaste is a specialty all its own. To put it another way, if you are selling to a yard, you are leaving a lot of money on the table.

  18. The Following User Says Thank You to Mudlucky for This Post:



  19. Similar threads on the Scrap Metal Forum

    1. Looking for an "Above Scrap Pricing" Buyer for "R" Type RAM
      By sledge in forum Computer Recycling
      Replies: 1
      Last Post: 04-21-2015, 07:52 PM
    2. Overcoming argument "I can haul it to the scrap yard, myself"
      By Mick in forum A Day in the Life of a Scrapper
      Replies: 12
      Last Post: 07-14-2013, 08:10 PM
    3. Replies: 11
      Last Post: 07-08-2013, 04:11 PM
    4. Replies: 3
      Last Post: 06-27-2012, 11:00 PM
    5. does your yard pay in "gross" ton?
      By lsimson in forum Scrap Metal Questions and Answers
      Replies: 11
      Last Post: 03-13-2012, 02:09 AM

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook