Page 1 of 4 123 ... LastLast
Results 1 to 20 of 62

Picked up a load of monitors today!

| A Day in the Life of a Scrapper
  1. #1
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts

    Picked up a load of monitors today!

    Hey everyone! I'm kind of new to e-scrapping but picking up on it fast. Today I went and picked up 133 monitors....won in auction paid about &.75 a piece for them. I can dump these for free to getting rid is not a problem. I may even break them completely down because I live close to Atlanta and can dispose of everything properly for free/paid. Only thing I can't get paid for is the glass (I think, correct me if I'm wrong). But here is a picture of the load, had to break down 2 pallets to fit on the trailer and strapped pallets on the sides of the trailer for re-enforcement (Shrink wrap was weak and I could just see the monitors toppling over the side of the trailer). Here's a couple pics. I broke down 32 of these when I got home in 3 hours. Tomorrow I will kill the load, I'll post pics and updated progress. Good luck everybody!






  2. The Following User Says Thank You to bh9889 for This Post:



  3. #2
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts

  4. #3
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts

  5. #4
    1956's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Fort lauderdale FL The Venice of The USA
    Posts
    642
    Thanks
    399
    Thanked 1,276 Times in 348 Posts
    Well good luck,most people would charge the guy to take just the monitors,the question you should have asked yourself is where are the towers that went with those monitors?answer the guy that bought them didnt want them, experience is not cheap Good luck Scraping

  6. The Following User Says Thank You to 1956 for This Post:


  7. #5
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts
    These were at auction. Towers will be auctioned off within a week along with a gaylord of motherboards, I'm just putting my foot in the door. Besides I might have a a couple days wrapped up in this, breaking down and disposing. Thank you for your input.

  8. #6
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Live and learn. I CHARGE $10 each to take monitors and you just found out why. I do break them down but dealing with the CRTs is not worth what you get and I have a recycle facility that takes them free. Many people can take them to Goodwill under their RECYCLE agreement with Dell. BUT most Goodwills will not take as many as you have.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  9. #7
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts
    As mentioned in the orginal post, I don't pay to dispose of them. I have a recycling center a throw of a rock away. They take them for free. I'm young and can work fast/hard. As mentioned I broke down 32 in 3 hours and thats drinking a couple beers .

  10. The Following 2 Users say Thank You for This Post by bh9889:


  11. #8
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts
    I understand it may or may not be worth it to some people. But when you're struggling and aren't afraid of a little bit of work, it's always worth it. Just saying.

  12. The Following 9 Users say Thank You for This Post by bh9889:


  13. #9
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    NJ
    Posts
    157
    Thanks
    55
    Thanked 146 Times in 63 Posts
    Good work bh. Money is money.
    "Easy does it, first things first, do what you can. Believe me, I too have been through the wringer." Bill W.

  14. The Following 4 Users say Thank You for This Post by jbravo54:


  15. #10
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    Good luck with those monitors....as long as you have a place to dispose of the glass then you should make out ok. They are the achilles heal of scrapping along with tv's. I agree when things are tough you do what you have to do. We all started out somewhere and most started scrapping televisions and monitors. You will realize that your money will be better spent buying other types of scrap and grabbing the curb side tvs and monitors when you can. When you do your breakdown keep track of the time it takes break them all down. Then take what you get paid out on the materials and see how much an hr you made. Also don't forget to factor in your gas when you picked them up and dropped them at the recycling center. Then you will have a good idea if it was worth it for you or not. Good luck and please post your results when you get done.
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  16. The Following User Says Thank You to BRASSCATCHER for This Post:


  17. #11
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts
    Thanks guys. I do understand it is A LOT of work, and most don't feel obligated to it. Tomorrow I will post updated pictures of the breakdown!

  18. #12
    happyscraper's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    spring hill,fl
    Posts
    2,864
    Thanks
    350
    Thanked 1,371 Times in 847 Posts
    Not a bad deal if you can get rid of the tubes and plastic. You will get alot of copper and low grade boards and some will have an aluminum shield over the back of the tube. I would have done it if I could get rid of the tubes and plastic but I can't at this time. You'll make some good money if you can get a good priece for the low grade boards. Nice grab and good luck.

  19. The Following User Says Thank You to happyscraper for This Post:


  20. #13
    SMF Badges of Honor


    Member since
    Jan 2013
    Location
    Midwest
    Posts
    18
    Thanks
    38
    Thanked 9 Times in 6 Posts
    One man's trash is another man's treasure.

  21. The Following User Says Thank You to quaz for This Post:


  22. #14
    happyscraper's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    spring hill,fl
    Posts
    2,864
    Thanks
    350
    Thanked 1,371 Times in 847 Posts
    Shouldn't that be "One mans crap is another mans scrap"

  23. #15
    brandon's Avatar
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    North Carolina
    Posts
    787
    Thanks
    46
    Thanked 673 Times in 310 Posts
    If you were near me I would give you 15 more.
    My fortune cookie said:
    You discover treasures where others see nothing unusual.

  24. #16
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts
    Well ****.

  25. #17
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts
    .....ok..well "darn".

  26. #18
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    you can stack monitors alot tighter if you remove the stands first
    I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
    I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE

  27. #19
    bh9889 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    35
    Thanks
    4
    Thanked 21 Times in 7 Posts
    Hey JG thank you for the advice! The warehouse already had them wrapped .....so we made the best of the situation .

  28. #20
    TheDude80's Avatar
    SMF Badges of Honor


    Member since
    Feb 2013
    Location
    Ohio
    Posts
    406
    Thanks
    309
    Thanked 394 Times in 179 Posts
    Curious to see what you make after expenses. Keep us up to date. I'm just starting out myself, haven't researched enough to know if there is anywhere around Toledo, that will dispose of the CRT's for free.


  29. Similar threads on the Scrap Metal Forum

    1. Just picked up my first real load of PC's ( PIC Heavy )
      By drozenski in forum General Electronics Recycling
      Replies: 11
      Last Post: 03-01-2013, 08:28 PM
    2. Picked up a load Yesterday
      By ScrapperNJ26 in forum A Day in the Life of a Scrapper
      Replies: 2
      Last Post: 11-29-2012, 03:57 AM
    3. Today i picked up....
      By Igigi in forum A Day in the Life of a Scrapper
      Replies: 12
      Last Post: 04-30-2012, 10:56 PM
    4. Picked up an old computer today not sure what it is
      By miked in forum General Electronics Recycling
      Replies: 22
      Last Post: 01-30-2012, 12:09 PM
    5. Sweet Load Picked up Yesterday
      By ComputerScrapper in forum A Day in the Life of a Scrapper
      Replies: 8
      Last Post: 04-14-2011, 09:43 PM

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook