|
Got a quick question on the power supply/source box pulled from a computer. When I pull them out, should I scrap them down or sell it intact to one of the guys who buy/sell escrap? I would post the question there but they would not let me. I guess you need some fancy privilege to do that. Get back at me fellas and gals.
|
You are probably better off cutting the wire and sell as two different commodities locally. Lot of weight to ship.
I don't think you need any fancy priveledges for that. On mine I cut the wires off and sell the rest as power supplies. I average .5 pound of insukated wire and 3 pounds of power supply per piece. Average out to around 1.60 per piece at the prices my yard pays.
Thornton Scrapper
|
I personally strip them down. The boards in there are a pain to take apart but i save them with my low grade boards and breakdown on a rainy / snowy day.
|
|
Ok, got it. I will not make any major plan on selling. I'm just gonna break it down when I havet.ime. Thanks
|
I am tight on space and would rather hoard boards until i get 100 lbs, so i cut the wire for #2 and turn in as is.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist
NEWBS READ THIS THREAD ABOUT REFINING!!!!
http://www.scrapmetalforum.com/off-t...ning-read.html
"We pay you to recycle"
|
cut the wire and then sell the power supply "box" as i call it to buyers on here
|
We cut the wires off they are sold as number two insulated, the power box goes as a electric motors sell them local, as said before to much weight to ship
|
id set aside the ones 400watts and higher that have sata connectors, thats what i am seeing the most demand for, id try to sell them to local buyers or computer repair stores before i would consider shipping them
350 watts and lower are all scrap unless they are 80plus cetified
I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE
Metal Recycling Entrepreneur
|
I have pulled several apart in the last few days & found the plastic coated wires, with the clips weight about 250grams.
@NZ$3 a Kg for plastic coated wire, they are worth about NZ$0.75cents for each bunch of wire.
NZ$1.00 = US$0.82 cents so say they are worth about US$0.60cents each bunch.
Theres a few with solid copper sheet heatsinks & one power supply had a off board power regulator that was still holding electricity.....
|
I pull the board out, cut the wires off 1.05# the board goes to my local buyer for .40# and the steel box goes in shreed for .10#
|
I cut the wires while the box is still inside the computer and send the rest to shred. I hate power supplies with a passion.
Garbage keyboards > spɹɐoqʎǝʞ ʎɐqǝ
|
My yard buys them without the wires for the same price as transformers,,, .25 a lb.Originally Posted by rca987
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
|
|
Thanks everyone, I gutted it as instructed.
|
|
None of my yards buy them as anything but shred, and I hate breaking those down. Trust me, if I could get electric motor price, I would.
I sell them complete at my local yard, 30 cents a pound. Taking about 1200 lbs of them over there tomorrow.
Metal Recycling Entrepreneur
|
I have to agree with you on that one Jghilino. Anything under 400w isn't worth keeping, unless it's from a vintage computer that is in demand. Its really a personal choice, but shipping them in bulk would get expensive
|
|
I guess its different strokes for different folks
Bring one to your scrap yard.
Ask them what they would pay:
Whole
Without wires
Wires with ends on
Wires without ends
My current yard will only pay $0.10/lbs for them and only $0.50/lbs for the wires.
So I am not bringing it to the scrap yard
|
if you check the buyers section, there are atleast 3-4 buyers in texas. I don't know if any of them are near you.
There are currently 2 users browsing this thread. (0 members and 2 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks