Results 1 to 9 of 9

I hope we save a little for our selves

| A Day in the Life of a Scrapper
  1. #1
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts

    I hope we save a little for our selves

    I know I am scrapping in special times ,Times that will pass .
    I have become a fixture of the community . Police once or twice have stopped me at a construction site.The look of , well ok . metal with a chunk of cement on it , twisted trash metal , old vac's and so on
    It's what they don't see thats most important NOT one piece of metal from the areas that supply the workers there good steel . there could be a pile of re-bar 20 feet from me but I don't have it . Best of all I am completely oblivious to any metal unless it's in a mix dumpster or pile of unwanted items.
    Yesterday I hit a local utility company dumpster what a score! (yes I have permission) for copper & brass I also remove all the old large nuts and bolts from the cut polls .Theres plenty of trash in there so It was a hour and a half of work to find it all - figure about $100 when all cashed in. A local police drove by as I toss out the trash metal goods , he sees me and could care less. It took time in to get to this point of trust in towns.



    But the real point of this post is I see all the really top quality steels I sell to the yards often its steel from 10 15 years ago . You know I'm just one small scrapper guy but add all of us and all the enormous quantities that in the end keep getting sold to china and others. Are we with out realizing sending out more then we get back in goods ? Are we slowly depleting the easy and fast have - raw materials that some day we may not have in the same abundance ? Are we scrapping out our country ?

    Some times i find a piece of steel I just have to admire ,
    usually it will be based on small size but kicking weight . sure in the mean time I sell off the others,but in time I have lots of fine short steel that are kind of like my pets . After that moment passes I eventually say , umm time to sell off this stuff !!
    And thats the truth - I sell it,then it's gone - and sure i got a $100 to show- that disappears to the money sucking tornado of my reality - - BILLS .

    People as drove home with my cash to day ,the sun was shining and it hit me ,Little By Little I am helping to sell off our raw materials . I hope I am wrong.
    Last edited by Copper Head; 06-15-2013 at 04:14 PM.

  2. The Following 2 Users say Thank You for This Post by Copper Head:



  3. #2
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    MISSISSIPPI
    Posts
    172
    Thanks
    97
    Thanked 175 Times in 76 Posts
    Your not selling off our raw materials. You are preventing the ones we still have in the ground from being used up. Look at copper. We have about 20 years left of ore. However this is expected to never run out because of people like us.
    It's one thing to sit in a fine office and at the end of the day con yourself into feeling good because you recycle newspapers and a few cans, but it's is another thing to get out and sweat and suffer the injuries of doing what we do.
    It's kind of like untested faith. Easy to believe in God when everything is going your way and your not hungry. Give me a homeless wreck that believes in God and I will show you a true christian.
    True I like the extra money too.
    You can make money 2 ways.
    1 - Do what others won't.
    2 - Do what others can't.

  4. #3
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    Yes I can see that we help prevent our in the ground resources from be depleted .
    But here is a point years ago when most of our goods were made in America we paid no mind to "made in china" yet now china in a sense has systematically become the main suppler of almost every thing. Recently I saw a Schwinn bike, now in my day that was made in the USA . Now it's China and heck it looks like good workmanship. I walk through Target all China .
    So the question is ? how can we be sure that China and others are not Slowly & systematically buying more then we get back in goods .It make sense to me as Don't you love having a big stash of metals . I pick up each and every TV cause I know it will end when all people finally own Flats. What makes you think china & India don't say - KEEP buying - the good scrap will run dry !! then we will have the Lions share of it. after all they know what there selling us now.
    The new stuff they sell us has scrap items also ,but not like the past items . Thats the truth ,TVs ovens fridges and more are just not as juicy as the original. They are stockpiling . And we may one day have the choice of buying back what we need or tap into our land resources .

    Correct me if I am wrong but did china buy a huge mine in Australia . So fellow scrappers we are paid well for our work cause they want what we still can find . I feel it - - some day a change is on the way not sure when .
    I once found a old news paper circa 1954 the head line stated CHINA vows to be a world producer by year 2000 They clearly did what they stated . Well i am telling you we are being paid very well for our work wile the poor of those foreign towns get pennies for there efforts , some thing is fishy !! The day I see a vacuum motor with AL wire that will be a sign .I have encountered small window fans with AL motor wire & and I see more of the last tube TVs have a AL wire as the wire around tube . Cones still good .
    I hoard ,and they are hoarding big time
    Last edited by Copper Head; 06-15-2013 at 10:23 PM.

  5. #4
    SMF Badges of Honor

    Member since
    Mar 2012
    Location
    Chesaning
    Posts
    472
    Thanks
    24
    Thanked 355 Times in 171 Posts
    I'm moving from steel and ewaste over to plastic. Work will never run out for me.

  6. #5
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    There will always be a market for something to recycle...the point is you just have to make sure you jump the the next thing and be ready to change again...that is being nimble in business. I never worry because people will always want and buy something else that comes out and they will need or find a way to use the materials from the previous generations waste.

  7. #6
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    when I first started doing this, I asked each of the two yards that I use where their scrap goes. One said to the steel mills in Cleveland and the other said it goes mostly overseas.

    I mostly use the one that stays local. I like that.

  8. The Following 3 Users say Thank You for This Post by newattitude:


  9. #7
    Libertytow's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    Silverton NJ
    Posts
    562
    Thanks
    64
    Thanked 340 Times in 180 Posts
    copperhead while i see your point there are tariffs for teh oversea metals so cleveland and pittsburgh steel can get out resources cheaper
    Liberty Towing & Recycling
    (732)279-8599
    Cleaning up NJ 1 LB at a time!
    Certified Mobile Scales
    Fully Insured Carrier usdot # 1802487
    WWW.LibertyTowing.Webs.Com
    WWW.TRRecycles.Webs.com

  10. #8
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    MISSISSIPPI
    Posts
    172
    Thanks
    97
    Thanked 175 Times in 76 Posts
    It is sad that we are no longer producing as we once did, but the fact that the scrap goes overseas is not a reflection on what you are doing as much as it is a side effect of a much larger issue.
    America has been whoring it's soul for a while. Remember in the 1980's when everyone thought Japan was going to own the U.S.? Guess what Japan was small compared to the east Indian ownership of real estate and business.
    China right now produces a lot of product not just for us but for European markets as well.
    The fact is you have to sell (in this case steel, copper, brass, etc...) to the user. I would love to see more metal used here in the U.S., but it is simple supply and demand.
    The fact that you are selling your scrap and some of it ends up overseas is caused more by our government and consumers than it is anything else.

  11. #9
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    Youngstown, OH
    Posts
    606
    Thanks
    6
    Thanked 282 Times in 193 Posts
    With the need for cheaper products companies use cheaper metals (or switch to plastics). I have an old metal bucket I use for washing my cars. The steel is thick, the rubber on the wheels looks different (natural rubber maybe), looks like it was dipped in molten tin instead of they very thin coating sheet metal gets today. Heavy duty riveted construction and it will outlive me. Today you get plastic buckets. Ever compare an old metal hand drill to what we use now (mostly plastic)?

    Manufacturing is in decline in the US because money is invested in places with a higher return. Until the tax laws are changed so that capital gains are taxed much higher we will continue to be a nation of boom and bust flippers (quick profits with no care about the destruction it causes in society).

  12. The Following User Says Thank You to unknownk for This Post:



  13. Similar threads on the Scrap Metal Forum

    1. Hope to Get Back to Scrapping SOON!!!!!!!
      By twmart in forum Off Topic Discussions
      Replies: 11
      Last Post: 06-08-2013, 11:40 PM
    2. Today's score (I hope)
      By fnd5055 in forum General Electronics Recycling
      Replies: 4
      Last Post: 12-22-2012, 06:23 PM
    3. My Scrap Yard in Hope B.C.
      By gustavus in forum Scrap Metal Tips and Advice
      Replies: 7
      Last Post: 09-07-2011, 09:27 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook