Results 1 to 10 of 10

Truck woes and silver in the trash

| A Day in the Life of a Scrapper
  1. #1
    parrothead started this thread.
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts

    Truck woes and silver in the trash

    On the way home from work last night, I was at a stop light. The light turned green, I stepped on the gas, and heard a NASTY SNAP. Truck still moved, but when I got up to about 20 mph it started shaking like crazy. I backed off and went the rest of the short distance home. I could not see anything underneath and decided that it has to go to my guy. Had it towed there this morning. Talked to him later in the day and he said my U joint had snapped. Then he asked if my truck came from up north. I said yes, from Illinois. He said the U joint is not bad, but in replacing it, the drive shaft is so rusted (from salt and such) that it may need replaced in the process. (yes, I trust this guy and have dealt with him in the past). So he tore into it and I will hear from him tomorrow. Hopefully the drive shaft will still be good.


    To the silver.

    After my wife picked me up from work today, there was someone cleaning their garage and had a ton of stuff on the road. I really had my eye on the tubs some of the stuff was in. I chatted for a couple minutes and grabbed the tubs full of Christmas stuff and another box next to them. Also some fans. Got home and went through all of the Christmas stuff. Won't use it, but it is in nice shape and we will take it to the reuse store. Then got to the box that I thought was more Christmas stuff. It ended up being a bunch of paperwork and a couple o jewelry boxes at the bottom of it. The boxes were full of some pretty nice costume jewelry and 2 silver plated spoons and a mercury dime and a 40% silver half dollar. Also is a bunch of paperwork and an old bible all from the "Order of the Eastern Star". All of that stuff is mint including the bible still in it's box (about a $20 or so e-bay item, maybe more with all of the other paper work). Also an old 1942 army issue pocket bible.

    Take the good take the bad. Truck will cost about a grand if the drive shaft needs replaced, 600 if not. That price includes the tow, an oil change and a rear break job with rotors.
    "64K should be enough for anybody." - Bill Gates 1981
    http://www.treasurecoastelectronicrecycling.com/


  2. #2
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    i rather doubt they intended to toss the jewelry, just sayin

    You can find a used drive shaft at a wrecking yard and be done with it, or even have a new one made, it isn't that difficult really, they just cut the size pipe it needs, weld the shafts on each end, spin balance it, viola, new drive shaft

  3. The Following User Says Thank You to Bear for This Post:


  4. #3
    auminer's Avatar
    SMF Badges of Honor



    Member since
    Nov 2012
    Location
    Allen, TX
    Posts
    1,233
    Thanks
    579
    Thanked 2,301 Times in 857 Posts
    I think karma would pay you more than the silver you found if you at least dropped by with the jewelry boxes complete as you found them and ask if they did intend to dispose of that stuff. Maybe they did, and will let you keep it; or maybe they'll thank you profusely for returning it safely & pass on to their friends the story of that nice, honest, young man that brought their valuables back to them.

    Or, maybe they'll be total jerks about it, and take it back without so much as a thankyou, but that night when you drift off to sleep you'll have a clear conscience.

    I sometimes wonder if karma/life/FSM throws tests like these at us and the outcome of our own problems depends upon our responses to them. Like your drive shaft possibly costing $1000, and possibly only costing $600. Are a coupla silver coins & spoons worth the $400 difference?
    Last edited by auminer; 06-25-2013 at 10:50 PM. Reason: My ebay keyboard can't spell ;)
    Out of clutter, find simplicity. --Albert Einstein

  5. #4
    parrothead started this thread.
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    She was adamant about it all being garbage and was kind of snotty about it at that. That is her karma (if you believe in that sort of thing). I always do right by people, but that $3 worth of silver will not get returned to her door.

    Further more all of the boxes of COSTUME jewelry had notes on it saying things like, "costume jewelry, for anyone". They were numbered even. It was a death box. This was all of the stuff saved from her parents dyeing that she was tired of hanging on to. This stuff had been laid out at the final will reading and no one wanted it. It was a certain fact that she wanted it gone.

    If I had any thought whatsoever that she had accidentally thrown it out, I would have ran it right back to her, but after the conversation with her, I knew she and no one else wanted anything to do with this box.

    I do not need lectured on Karma.

  6. #5
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    haha, on to step two, check that stuff out, costume jewelry can be quite valuable in the collectors market ; )


  7. #6
    auminer's Avatar
    SMF Badges of Honor



    Member since
    Nov 2012
    Location
    Allen, TX
    Posts
    1,233
    Thanks
    579
    Thanked 2,301 Times in 857 Posts
    Quote Originally Posted by parrothead View Post
    I do not need lectured on Karma.
    Hey, not trying to step on toes, lecture, or preach or anything... just didn't have the whole story.

    Now I do & I certainly agree with you.

  8. The Following User Says Thank You to auminer for This Post:


  9. #7
    parrothead started this thread.
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Well, I got off easy on the truck. Drive shaft is good to go. Truck will be ready tomorrow.

    And if there is such a thing as karma, maybe it was throwing me a bone with that box. After all, I spend my days caring for the elderly in a dead end job for horrible pay. Scrapping is the only way that I can afford to keep that job that I like so much.

  10. The Following User Says Thank You to parrothead for This Post:


  11. #8
    cummins's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    ontario
    Posts
    573
    Thanks
    15
    Thanked 255 Times in 171 Posts
    And he knows the scrap goes in the back if the truck right lol, man at that price id expect a nice fat aluminum one

  12. #9
    parrothead started this thread.
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Quote Originally Posted by cummins View Post
    And he knows the scrap goes in the back if the truck right lol, man at that price id expect a nice fat aluminum one
    When I see him tomorrow, I will ask for the scrap.

  13. #10
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by parrothead View Post
    Well, I got off easy on the truck. Drive shaft is good to go. Truck will be ready tomorrow.

    And if there is such a thing as karma, maybe it was throwing me a bone with that box. After all, I spend my days caring for the elderly in a dead end job for horrible pay. Scrapping is the only way that I can afford to keep that job that I like so much.
    I threw a ujoint out of my camper hauler up in upstate NY, about the time I was pulling into the dealers lot.
    I went down the street to the auto parts store and got a ujoint and borrowed a vice from the shop and reinstalled a brand new ujoint.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.


  14. Similar threads on the Scrap Metal Forum

    1. Are the silver ends on ribbon connecting cables silver?
      By tefanisman13 in forum Scrap Metal Questions and Answers
      Replies: 9
      Last Post: 04-01-2014, 12:42 AM
    2. From trash to silver
      By Copper Head in forum A Day in the Life of a Scrapper
      Replies: 12
      Last Post: 08-12-2012, 01:43 PM
    3. Trash Night
      By charn in forum A Day in the Life of a Scrapper
      Replies: 11
      Last Post: 06-18-2012, 03:27 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook