Results 1 to 20 of 100

Update on water tanks

| A Day in the Life of a Scrapper

Threaded View

Patriot76 Update on water tanks 08-30-2013, 04:32 PM
Patriot76 The first step was to cut a... 08-30-2013, 04:55 PM
Patriot76 This is a picture inside the... 08-30-2013, 05:05 PM
ginofrater Thanks for the pics. It is... 08-30-2013, 05:08 PM
Patriot76 Since the tank started to... 08-30-2013, 05:32 PM
TheKid Update on water tanks 08-30-2013, 07:01 PM
kbob Job well done! Very nice. 08-30-2013, 07:40 PM
Patriot76 This picture should have been... 08-31-2013, 04:09 AM
Patriot76 Back to the main tank we... 08-31-2013, 04:18 AM
KzScrapper Awesome Thread...Thanks! 08-31-2013, 05:58 AM
parrothead Very nice bunch of picks.... 08-31-2013, 07:11 AM
miked I look forward to more... 08-31-2013, 07:47 AM
Sirscrapalot Crazy comes to mind...but... 08-31-2013, 08:16 AM
IdahoScrapper Great thread. Looks like it... 08-31-2013, 09:41 AM
Patriot76 Update on the loader. It was... 08-31-2013, 03:18 PM
Patriot76 This picture is just before... 08-31-2013, 03:23 PM
Patriot76 The pictures show the early... 08-31-2013, 03:50 PM
Patriot76 Next strategy was to pull it... 08-31-2013, 03:54 PM
Patriot76 The northwest corner of the... 09-01-2013, 04:51 AM
Patriot76 Since the tank flipped, the... 09-01-2013, 05:00 AM
Patriot76 Once again I must emphasize... 09-01-2013, 06:17 AM
MattInTheHat I like the tip about the Tire... 09-01-2013, 05:57 AM
bigdog72 this is amazing, nice work... 09-01-2013, 09:32 AM
Mechanic688 Partiot, Any ideas yet on how... 09-01-2013, 10:58 AM
Patriot76 I am still putting together... 09-01-2013, 04:47 PM
sawmilleng Wow, you have big nackers to... 09-01-2013, 05:46 PM
Patriot76 According to my wife, big... 09-02-2013, 02:54 AM
Patriot76 Back to the pictures. These... 09-02-2013, 03:36 AM
Patriot76 This picture shows the south... 09-02-2013, 03:50 AM
Patriot76 This shows the south side cut... 09-02-2013, 03:55 AM
Wolfwerx Wow, this is fascinating to... 09-04-2013, 08:28 AM
sawmilleng You did an interesting job. ... 09-04-2013, 09:17 AM
Patriot76 The floor of the main tank... 09-04-2013, 03:07 PM
numbers Your last two paragraphs are... 09-04-2013, 05:11 PM
Patriot76 Sawmill, Auto correct... 09-04-2013, 06:02 PM
sawmilleng No walleye in my area, unless... 09-04-2013, 09:56 PM
BRASSCATCHER One of the more intriguing... 09-05-2013, 06:39 AM
Patriot76 Just a side note on my... 09-05-2013, 07:37 AM
Patriot76 I need to make a correction... 09-05-2013, 03:57 PM
PistoneScrapProcessing Just caught this thread. How... 09-05-2013, 07:35 PM
Patriot76 This is a picture of the top... 09-06-2013, 02:49 AM
Patriot76 This picture puts a lot of... 09-06-2013, 05:42 AM
Patriot76 Piston, Wish you were... 09-06-2013, 06:22 AM
Patriot76 Earlier in the post I talked... 09-07-2013, 04:55 AM
Patriot76 Last post on this thread. ... 09-09-2013, 06:12 AM
Jonniebrass That was an amazing endeavor... 09-09-2013, 09:39 AM
Bear Amen Jonnie. My thanks too... 09-09-2013, 10:36 AM
sawmilleng Thanks for your documentary! ... 09-09-2013, 10:56 AM
Patriot76 Okay, I thought it was my... 09-09-2013, 03:55 PM
taterjuice Just caught this thread and I... 09-09-2013, 04:18 PM
Patriot76 Tater, Thank you for the... 09-09-2013, 04:38 PM
taterjuice I usually charge a royalty... 09-09-2013, 05:40 PM
TheRecycler You must have some serious... 09-10-2013, 04:45 PM
Patriot76 I thought this story had come... 09-22-2013, 05:52 AM
Patriot76 When the two managers started... 09-22-2013, 05:58 AM
Patriot76 Some more pictures of the... 09-22-2013, 06:14 AM
Mechanic688 Down here there is a company... 09-22-2013, 09:10 AM
newattitude All I can say is ''Wow!'' and... 09-22-2013, 09:58 AM
Bear Where did the stairs break... 09-22-2013, 11:29 AM
Patriot76 Bear, You are correct, the... 09-22-2013, 12:28 PM
sawmilleng Patriot, Why wasn't the... 09-22-2013, 02:35 PM
Patriot76 There were two problems. The... 09-22-2013, 03:18 PM
Patriot76 Here is a picture of the ring... 09-23-2013, 04:24 AM
Patriot76 Playing a little bit of catch... 09-23-2013, 04:51 AM
taterjuice Kinda hard to scrap items... 09-22-2013, 02:54 PM
Patriot76 I just started a winter... 09-22-2013, 03:11 PM
taterjuice You truly are a big fish in a... 09-25-2013, 07:26 AM
KzScrapper Hamm's...The beer made from... 09-25-2013, 05:52 PM
Patriot76 Not the same as Rocky... 09-26-2013, 03:51 PM
Patriot76 Thank you. After your post I... 09-26-2013, 03:55 PM
Mechanic688 The refer box may end up... 09-25-2013, 08:01 PM
Patriot76 I wanted to share an update... 09-26-2013, 03:45 PM
Electrowaste Catching this tread a little... 09-26-2013, 07:01 PM
Patriot76 There will be a delay in my... 09-27-2013, 02:43 AM
Ecycle Atlanta [QUOTE=Patriot76;169084]There... 09-27-2013, 03:41 AM
Patriot76 I was just reviewing this... 01-01-2014, 09:21 AM
jennija This has got to be one of the... 01-03-2014, 07:55 AM
Patriot76 A picture was promised after... 08-31-2014, 04:12 PM
  1. #1
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,955
    Thanks
    10,578
    Thanked 7,214 Times in 2,253 Posts

    Update on water tanks

    I just got back from my personal challenge of scrapping the community water tanks. I have been viewing posts, but devoted all of my time over the last two months to the project instead of updates. Now that the challenge has been completed and I hauled the last load instead of being buried under it, I will update you on the process. Thank you to all of you that provided ideas and support.



    First this is a history of my challenge and meant for entertainment, not educational purposes. Although some may benefit from some of my experiences, I am not an expert nor a professional in this type of work.

    This was an enormous project with almost 70 tons of steel by the end. Completed in six and a half weeks by a one man crew with the help of one of my sons for one week. I did have additional help from the water district managers and several local farmers. They provided ideas and helped with certain challenges. I want to thank them for their help.

    I will be posting this in a series of posts from start to finish. I hope you enjoy this as much as I enjoyed completing the project.

    Last edited by Patriot76; 09-05-2013 at 03:16 PM.

  2. The Following 16 Users say Thank You for This Post by Patriot76:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook