House demo & regulations

I picked up a project that consisted of removing a 500 gal fuel oil tank with 30 gallons of fuel (that I will use for my home )
a steam oil burner with a touch of asbestos 600 lb as short , I picked up some tin mix metals to the tune of 500 lb
AL of around 30 pounds
and #1 romex that fills a 25 gallon pail some brass some copper .
I took care of the situation and house was then demoed .
I am to pay owner 20% cut .

So the question all said and done - - If a scrapper ( like Me ) did not remove the boiler and tank would the demo crew not of proceed I feel they would not of put boiler in dumpster . and would not of dare moved oil tank for all the ramification associated with a oil spill .
This is my second oil tank and I see in 2 years - rules have changed I have to cut a round or square hole in tank of around 12 inches so yard men can see any major sludge . I also have to rinse tank with water .

This whole project seems like too much work for a 20% cut. At this point I feel the owner is way ahead as I think done by the law this is a $1200 project cost for him.
I will add he has a LLC home rental company that this home is a part of . So wile I am in gypsy mode doing this,
his company is by the books
I sensed his urgency as he ask if I can handle the oil tank.

I will give him his cut after I discussed with him some realities,( I feel he will let it slide ) But for the future I feel this service of oil tank is not gonna be free in the future




Yes the pick up truck allowed me to just do a project I would of not taken on with the mini van.

Go back to him after it is all said and done and talk price and show him some info. Maybe he can budge.

Sorry about the tin thing.. It was late at night for me and I thought you had something there that was not something I have heard of.

having to deal with rinsing and then getting rid of that now funky water that you rinsed with is an environmental nightmare.

Any update on this?

I do around 15% with the deal i have going. The difference being i go through the guys that own the demo crew and they offer my service for me to the clients and have the paperwork needed already so when the deal is made it's good to go. In this case i am paying for convenience there is no leg work on my end to get the job. Any contractor should make a little off there subs that's just business
a hand pump and a few 55 gallon drums will be a valuable set of tools if you plan on keeping these jobs up.

Any day you can learn something is a good day for sure.

wait until you get one 3/4 full all you hear in your mind is payday $$$
I like to add Mitco srt-2+ to any fuel dumped into my tank that i get this way helps with the sludge and freezing never know how long it's been sitting in that tank.