Page 1 of 2 12 LastLast
Results 1 to 20 of 26

I think I just did myself well today

| A Day in the Life of a Scrapper
  1. #1
    MNScrapper28 started this thread.
    SMF Badges of Honor

    Member since
    Jan 2014
    Location
    Minnesota
    Posts
    3
    Thanks
    0
    Thanked 29 Times in 2 Posts

    I think I just did myself well today

    Hello I am new to SMF and I have a little background in scrapping but not as much most of you. Well the last couple days I was trying to figure a way to get in with some companies who aquire quite a bit of scrap. Well today I got my break! I only do the scrapping on the side of my regular 9-5 job. Today my boss called me and told me not to bother coming in because he would be closing early due to the cold weather so I instead decided to take the opportunity to head out and find me some scrap. I started off checking with the local apartment complexes, not much luck but a single washer an dryer in one.

    With no luck and about 20 miles from home I decided to head back. Pretty upset I wasnt able to acquire more I figured I'd travel down a different road than i usually take, I see a car pulled over and a younger woman on the side of the road. I pull over to make sure everythings okay. She tells me she had a flat tire and that her cell phone was dead. I offered to change her tire for her and let her and her two daughters sit inside my truck while I do it because it wa negative degrees outside an my truck was toasty. She accepts and I go about my way and change the tire. At the end she offers me a 50 dollar bill, I said I would like to accept it but I am doing it out of the goodness of my heart because I know what its like to be stuck.

    She mentions the washer and dryer in the back of my truck, I said yeah I am doing what I can to help keep my bills paid and make sure my family has everything and every little bit helps. She mentions that her husband owns a company where they do shipping of appliances and electronics. She proceeds to tell me that she wants me to follow her over to her husbands warehouse because she knows there is a bunch of scrap I can have over there. Of course i accept the opportunity and we head over. Once we arrive she introduces me to her husband (real cool guy) and tells me that he has a unbelievable amount of scrap that he reall needs to move. I said well hey, I like the sounds of that. Lets go have a look.

    He shows me the part of the warehouse where the returns/scrap are stored. I couldnt believe my eyes, I had to double check and slap myself a couple times. I asked him if he seriously would allow me to have all of it and he said yes, He really appreciates me helping his wife and kids, and that I was welcome to take as much as I can take because otherwise he end up paying someone to haul the stuff away and he doesn have the time to break the stuff down. This is my count of stuf, There is 21 refridgerators, 14 sets of waser and dryer, so 28 total, 6 stoves, 5 microwaves. Like I said I am new to this, and all I can see is money signs spinning in my eyes. He asks if I am able to scrap electronics, I tel him yes I can but its alot of work. He says well if you are up for it I got plenty to go around.

    He takes me into another room in this huge warehouse and tells me anything I'd like to take is mine. I've got a count of what I seen, 42 desktop towers, 22 laptops, theres well over 20 older style computer monitors, theres 17 LCD Screens, a huge crate of mouse and keyboards, 11 Plasma TVs ranging from 39'' to 60. Countless DVD Players, If I had to guess I would say 75-80. all different makes and models. Then in the corner I spotted 18 Window A/C units, Some larger some smaller. I still havent dug through half of the boxes in the back, but he also gave me about 35 tube TV's.

    I litterally was in shock over the situation. He said its been piling up for months because he had a guy who had come in before and asked him for his scrap. He was picking it up weekly, until one week the lock on his dock door was broken and TV's where stolen from him. So he said he quit letting the guy take it because he had a very odd feeling it was him. So he hasnt had anyone take the stuff and he just has piles and piles of this stuff literally. I spent the day loading and unloading stuff from his shop to my house, Its about 3 to 4 miles away. I am using a regular cab long box chevy pickup, so you can imagine how many loads I will need to make to bring it back to where I am keeping it until I can strip everything. First purchase I am planning is a descent trailer with sides to haul all this scrap with. He said it doesnt have to be done in a certain time so thats helpful.

    After about my 3rd load I see a guy flaggin me down 3 docks over. He asks if I charge to haul stuff away, I tell him no whatever I make off the stuff is my profit. he asks if I have a minute to look at what he has, and I told him sure I can take a look. Again, I am in shock. He manages that branch of direct TV and he has over 60 of the small satelite dishes that you see now days. Then he tells me he has 2 of the HUGE ssteel ones thatyou used to see on the ground, Asks if I have a way to cut them up and haul them away. I told him I got the tools capable of doing it, and I got his number from him and told him to give me a couple days to gather everything up.

    Glad I pulled over to help out!

    I have been down in the dumps about truck problems, being a broke ass and everything in between. This really really made my day and changed my whole week. It was perfect. I just thought I'd post on here because I had to tell someone and if I tell my friends they'll look at me like, Wow you got a bunch of junk. Not realizin I walked into a pretty good chunk of coin. I will spend the rest of my night tipping back a few cold ones and watching youtube videos of what to look out for as money makers when I am dissasembling everything.




  2. #2
    spinroch's Avatar
    SMF Badges of Honor

    Member since
    Dec 2013
    Location
    Rochester, NY
    Posts
    675
    Thanks
    1,983
    Thanked 1,556 Times in 460 Posts
    Wow!

  3. The Following User Says Thank You to spinroch for This Post:


  4. #3
    ScrapperSkip's Avatar
    SMF Badges of Honor


    Member since
    Jan 2014
    Location
    SE Wisconsin
    Posts
    65
    Thanks
    162
    Thanked 80 Times in 32 Posts
    Congrats on your great finds! Helping others does pay off in the long run. Sometimes sooner than later! There is a wealth of information here on the forum, just use the advanced search function at the top right of the screen and you'll find everything you need to know about breaking things down for the most profit. I learned most of what I know here on SMF and everyone on here is great.

  5. The Following User Says Thank You to ScrapperSkip for This Post:


  6. #4
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    Cool beans! MN : D Get those towers and stuff first and get em out the weather. Then, while you're hauling, and tearing down the rest, maybe you'll get chances to sort through them for the good old ones : )
    Way to go man, you did great! ; )

  7. The Following User Says Thank You to Bear for This Post:


  8. #5
    SMF Badges of Honor

    Member since
    Oct 2012
    Location
    Alabama
    Posts
    764
    Thanks
    1,067
    Thanked 1,213 Times in 471 Posts
    Amazing score, and probably can be an ongoing one. Good job.

  9. The Following User Says Thank You to Pnutfarmer for This Post:


  10. #6
    Steeltree's Avatar
    SMF Badges of Honor


    Member since
    Aug 2012
    Location
    Texas
    Posts
    19
    Thanks
    0
    Thanked 23 Times in 12 Posts
    Outstanding. You have room for all that stuff?

  11. #7
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Aliquippa, Pa
    Posts
    25
    Thanks
    16
    Thanked 18 Times in 11 Posts
    Nice score. Nothing better than knowing you helped someone out without expecting anything in return. Karma has a funny way of happening

  12. The Following 3 Users say Thank You for This Post by mikenofx2000:


  13. #8
    MNScrapper28 started this thread.
    SMF Badges of Honor

    Member since
    Jan 2014
    Location
    Minnesota
    Posts
    3
    Thanks
    0
    Thanked 29 Times in 2 Posts
    Thank you everyone. I have been reading over the forums and trying to gather as much info as I can about each. I am real excited about all of this. I have to go back on Saturday since I work tomorrow but I am going to borrow my uncles trailer and try to get as much as possible.


    Are washer and dryers worth breaking down? I planned to clip the cords and send them over, couple guy told me the motors aren't worth tearing out for the price difference but on a Saturday when I got nothing going on most of the time is it worth it to tear apart the motors? I checked a couple, couple had stainless tubs inside. I plan to yank those, I only checked a couple out so maybe more have them as well.

    Not a bad start for not doing it very long. I appreciate the replys, as far as somewhere to store it. My uncle owns a storage facility a ways down the road (7 or 8 miles) I can rent a 12x45 Unit for 65.00 a month. I should only need it for a month or so, That way I am able to break everything down and organize it into my barrels so I can figure what's what.

  14. #9
    sawmilleng's Avatar
    SMF Badges of Honor


    Member since
    Feb 2013
    Location
    Central Kootenays, BC, Canada
    Posts
    861
    Thanks
    713
    Thanked 1,200 Times in 521 Posts
    Karma on steroids!! But you started out with the right heart condition: helping out someone helpless on the side of the road. Good for you, and thanks for doing it!!

    Jon.

  15. The Following 2 Users say Thank You for This Post by sawmilleng:


  16. #10
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    If you want to do things on the up and up you might want to find an independent repair person in the ac/refer. field that will extract the freon for you for the price of the freon. Don't just let it out in the atmosphere. Other than that, that is a really good moneymaker. Stockpile some of it to break down further for more money. Be sure to pull the LNB's off of the sat. dishes, there's goodies in there.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  17. The Following 3 Users say Thank You for This Post by Mechanic688:


  18. #11
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    If you only tear down one of the 2 (being washers/dryers), I'd tear down the dryer. More often than not I find money. Best so far was $7 and change. Part of that was a $5.

  19. The Following 2 Users say Thank You for This Post by IdahoScrapper:


  20. #12
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Motors are usually twice of shred price, not a bad time spent if you don't spend an hour to get it. Like a refer. where you can reach in from the bottom and pull 4 clips and drop the compressor.

  21. The Following User Says Thank You to Mechanic688 for This Post:


  22. #13
    auminer's Avatar
    SMF Badges of Honor



    Member since
    Nov 2012
    Location
    Allen, TX
    Posts
    1,233
    Thanks
    579
    Thanked 2,301 Times in 857 Posts
    Karma strikes quickly sometimes! Great score!
    Out of clutter, find simplicity. --Albert Einstein

  23. The Following User Says Thank You to auminer for This Post:


  24. #14
    BurlyGuys's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Waterford Michigan
    Posts
    1,591
    Thanks
    1,109
    Thanked 1,620 Times in 635 Posts
    Boom Chicka wow wow!
    Burly Smash![/COLOR][/SIZE][/FONT]
    John Terrell (248) 224-2188
    Burly Guys Junk Removal LLC
    5499 Perry Drive Unit P Waterford, MI 48329
    http://www.burlyguys.com

  25. The Following User Says Thank You to BurlyGuys for This Post:


  26. #15
    parttimescrapperMD's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Maryland
    Posts
    161
    Thanks
    41
    Thanked 144 Times in 84 Posts
    Quote Originally Posted by BurlyGuys View Post
    Boom Chicka wow wow!
    That is what I was thinking. The story started out like a porno movie and turned into scrap porn. That is awesome! A great reward for your kindness.
    Last edited by parttimescrapperMD; 01-24-2014 at 09:47 AM. Reason: typo

  27. The Following User Says Thank You to parttimescrapperMD for This Post:


  28. #16
    wayne1956's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Cleburne, TX
    Posts
    705
    Thanks
    195
    Thanked 754 Times in 293 Posts
    Awesome find. If nothing else on the washers and dryers I would at least also remove the wiring harness, you can generally get close to a dollar a lb for insulated #2 wire. It sounds like you would anyway, but make sure you treat everyone there with respect, dress in clean clothes and follow up and keep any schedule you make with them. This will really make an impression with them and will probably turn into a continual permanent supply, and they will let anyone in their same business know about you if that other person needs some stuff hauled off, especially if it does not cost them anything and therefore will not hurt their bottom line.

  29. #17
    jord0690's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    Barrie
    Posts
    1,180
    Thanks
    27
    Thanked 716 Times in 440 Posts
    Love reading huge success stories like this. Congrats on this MASSIVE score!
    If I didn't have bad luck, I'd have no luck at all...

    GC Metal Recycling & Recovery
    Barrie, Ontario.

  30. The Following User Says Thank You to jord0690 for This Post:


  31. #18
    gabrielservices's Avatar
    SMF Badges of Honor


    Member since
    Aug 2012
    Location
    Carson city nv
    Posts
    152
    Thanks
    44
    Thanked 125 Times in 63 Posts
    try and find a appliance repair/resale shop to see if they will buy them for more then scrap value FIRST. That helps my bottom line

  32. The Following User Says Thank You to gabrielservices for This Post:


  33. #19
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Some of the washer/dryers also have alum. panels up top where the knobs are, which if you pull allows better access to the wire harness.

  34. The Following User Says Thank You to Mechanic688 for This Post:


  35. #20
    etack's Avatar
    SMF Badges of Honor
    Buying Tantalum capacitors

    Member since
    Oct 2012
    Location
    United States ohio
    Posts
    503
    Thanks
    443
    Thanked 635 Times in 282 Posts
    Depending on the washer and dryer the controller boards are worth pulling. I paid 62.oo for one for my dryer after a lighting strike.

    On a side note if you can send me an email I need some stove parts too.

    Also some of the appliances can be sold to repair people too.

    Eric

    eric@recycletantalumcapacitors.com
    I buy Tantalum Capacitors and offer other services. Check out my thread for more info.

    http://www.scrapmetalforum.com/scrap...-cap-more.html

    http://recycletantalumcapacitors.com/


  36. Similar threads on the Scrap Metal Forum

    1. Wasn't even trying today
      By doyousmellit in forum A Day in the Life of a Scrapper
      Replies: 13
      Last Post: 12-10-2013, 03:32 PM
    2. Today in tn
      By VERYOLDGUY in forum Scrap Metal Prices
      Replies: 2
      Last Post: 06-16-2013, 09:09 AM
    3. What i saw today
      By Dunemaul in forum A Day in the Life of a Scrapper
      Replies: 0
      Last Post: 03-05-2012, 11:40 PM
    4. Today......
      By Igigi in forum A Day in the Life of a Scrapper
      Replies: 10
      Last Post: 03-04-2012, 06:55 PM
    5. So I got 30 of these today
      By MrMetal in forum More than Scrap Value
      Replies: 11
      Last Post: 01-26-2012, 11:59 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 7 users browsing this thread. (0 members and 7 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook