Results 1 to 15 of 15

something scary as hell happened to me today

| A Day in the Life of a Scrapper
  1. #1
    steve129 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    barrie ontario candada
    Posts
    29
    Thanks
    4
    Thanked 12 Times in 9 Posts

    something scary as hell happened to me today

    so i was on my way back from one of my local scrap yards i saw some stuff at the end of a driveway decided to stop and pick it up. i put the truck in park (so i thought) got out and walked around to the passenger side of the truck only to look back over my shoulder to see and hear my truck shift into reverse and start rolling backwards on its own. i started back peddeling flicked the door handle, opend it jumped in the truck over the milk crates on the passenger seat and into the drivers seat to slam the breaks, by which point the truck was moving at a fair speed and had rolled backwards a few hundred yards. thank **** it was on a country road and i was the only one on the road no one got hurt and no damage was done (i got a bruise on my elbow and my knee but all things considered lucky as hell) this every happend to anyone elese? i checked the shifter 5 times to make sure everytime i shift into park it doesnt go all the way and catches reverse hopefully i can just adjust my shifter cable and sort it out

    Last edited by steve129; 03-18-2014 at 11:56 PM.

  2. The Following User Says Thank You to steve129 for This Post:



  3. #2
    Jillyenator's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Asheville, NC. Also Arizona.
    Posts
    346
    Thanks
    853
    Thanked 280 Times in 142 Posts
    I'm afraid of this all the time. Happened to me once. At least I was on the driver's side and was able to jump right in. It's a scary experience! Glad you worked it out safely.

  4. #3
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    ^^Ditto what Jilly said. I only did that once but caught it before I was all the way out of the truck.
    Scrapper, Scrap Yard Worker, Horse farm worker, Cooler Puller and just plain ''tired''

  5. #4
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    I had that happen with a brand new 3/4 ton (less than 500 miles). I was on the driver's side as I'd just stepped out. It was in a driveway on a busy street. Got it stopped just as it started into the street.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  6. #5
    AdmiralAluminum's Avatar
    SMF Badges of Honor


    Member since
    Jan 2014
    Location
    Ontario
    Posts
    737
    Thanks
    824
    Thanked 968 Times in 415 Posts
    The same thing happened to me just last week. Only my car sat there while I got out, and only started moving a minute or so later, so it totally took me by surprise. Looked up and I thought someone was stealing it for a split second then ran after my "ghost car" and luckily got in and parked it before it went up over the curb!

  7. #6
    steve129 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    barrie ontario candada
    Posts
    29
    Thanks
    4
    Thanked 12 Times in 9 Posts
    when i woke up thismorning i had to check to make sure it was still sitting where i left it lol. going to have to attempt to adjust the shifter cable before i can get back to work. truck wont start with it in reverse. its a 1998 chevy c/k 1500. bought it for $350 with a munched tranny (came with 2 trannies one was still under warrenty with all the paperwork from the wrecker. so i got another trabns for it from the wrecker put an exhaust and a few other parts on it, HUGE knock in the motor. so we pulled the motor and when i dropped the oil pan off it she was ran dry some of the crank bearings were completely gone and some were left smashed to hell. found a blazer with a crate motor that was put in in 2003 with 60 000km on it $550 for that truck. swapped the motor sold the blazer trans and scraped the rest that brand new crate in my truck cost me maybe $100, im maybe $1100 in the truck all in , it isnt much it breaks down on me allot but i dont see how i would ever replace it without spending 3-4 times as much money so i continue to patch her

  8. The Following 2 Users say Thank You for This Post by steve129:


  9. #7
    afmedic279's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    New Jersey
    Posts
    142
    Thanks
    20
    Thanked 132 Times in 57 Posts
    I had this happen too. Mine was an expedition, check where the shifter is under the dash on the column. found that 2 of 3 bolts had backed out tighten back up applied loctite and hasnt happened again.

  10. The Following User Says Thank You to afmedic279 for This Post:


  11. #8
    steve129 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    barrie ontario candada
    Posts
    29
    Thanks
    4
    Thanked 12 Times in 9 Posts
    i dont feel as dumb knowing im not the only one who has had to chase my truck down the street lol...... atleast no one elese saw it..... i think lol though it did feel kind of badass after i saved it..... still dont think anybody needs shinanigans like these. checking my haynes manual, has instructions for adjusting the shifter cable have to pull the bottom kick pannel off the dash anyway if it is as simple as loose bolts i think that may be a great place to start on it
    Last edited by steve129; 03-19-2014 at 10:20 AM.

  12. #9
    steve129 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    barrie ontario candada
    Posts
    29
    Thanks
    4
    Thanked 12 Times in 9 Posts
    i opend up the dash to reveal the problem was under the truck where the cable meets the trans. it popped out of the little holder for it i popped it back into place and am now trying to figure some sort of clamp for it

  13. #10
    VoodooDaddy's Avatar
    SMF Badges of Honor


    Member since
    Feb 2013
    Location
    Pennsylvania
    Posts
    191
    Thanks
    24
    Thanked 105 Times in 63 Posts

    something scary as hell happened to me today

    I dont trust my parking brake, so behind me in the bed sits a cinder block the old lady gave for christmas...

  14. #11
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by steve129 View Post
    i opend up the dash to reveal the problem was under the truck where the cable meets the trans. it popped out of the little holder for it i popped it back into place and am now trying to figure some sort of clamp for it
    for a temp try a nylon zip tie. go around where it snaps in.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  15. The Following 2 Users say Thank You for This Post by Mechanic688:


  16. #12
    steve129 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    barrie ontario candada
    Posts
    29
    Thanks
    4
    Thanked 12 Times in 9 Posts
    Quote Originally Posted by Mechanic688 View Post
    for a temp try a nylon zip tie. go around where it snaps in.
    good idea thanks

  17. #13
    jw7783's Avatar
    SMF Badges of Honor


    Member since
    Jan 2014
    Location
    Northern CT
    Posts
    205
    Thanks
    250
    Thanked 137 Times in 73 Posts
    coming home from NH on a Sunday in my 84 K5, I went through a toll and pulled over on the side right after to make sure the hood was fully latched. It had a habit of only being half latched(like if you pull the hood handle but before you move the lever) Anyway, I get out and open up the hood and as I slammed it down it clicked into reverse on the side of the highway!! luckily my girlfriend was inside and threw it up in park as I came running after it. That was scary, and I wasn't even the one in it!

  18. The Following User Says Thank You to jw7783 for This Post:


  19. #14
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Quote Originally Posted by VoodooDaddy View Post
    I dont trust my parking brake, so behind me in the bed sits a cinder block the old lady gave for christmas...
    Lol. That's better than coal in your stocking!

  20. #15
    steve129 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    barrie ontario candada
    Posts
    29
    Thanks
    4
    Thanked 12 Times in 9 Posts
    ok so when i popped it back in it was working i drove it around my yard was fine i parked it and left it until just now and now the pos wont shift out of park. i tried disconecting the shifter cable and shifting it manually nothin. jacked up the back end played with it some more still nothin....gm's products seem to get progressively less reliable as the years go on.... bad hydrolic pump on the trans.... sob guna cost me atleast a week....
    Last edited by steve129; 03-21-2014 at 10:25 AM.


  21. Similar threads on the Scrap Metal Forum

    1. What happened to the quotes at the top?!
      By Sirscrapalot in forum Off Topic Discussions
      Replies: 2
      Last Post: 06-19-2013, 02:14 PM
    2. Has this ever happened to anyone else?
      By JunkmanDan in forum A Day in the Life of a Scrapper
      Replies: 14
      Last Post: 06-18-2012, 05:14 PM
    3. a scary story
      By gueroinchicago in forum Off Topic Discussions
      Replies: 3
      Last Post: 07-15-2011, 11:28 PM
    4. Slow week, scary fuel costs...what to do!
      By BigRyan in forum A Day in the Life of a Scrapper
      Replies: 15
      Last Post: 04-22-2011, 11:21 AM
    5. What happened to affect copper prices?
      By Mick in forum Scrap Metal Prices
      Replies: 4
      Last Post: 04-08-2011, 01:07 PM

Thread Information

Users Browsing this Thread

There are currently 10 users browsing this thread. (0 members and 10 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook