Results 1 to 10 of 10

Ask the man in charge!

| A Day in the Life of a Scrapper
  1. #1
    mudlight2 started this thread.
    mudlight2's Avatar
    SMF Badges of Honor



    Member since
    Jan 2013
    Location
    Memphis TN
    Posts
    254
    Thanks
    179
    Thanked 273 Times in 98 Posts

    Ask the man in charge!

    I have been buying some used tires for my truck recently due to the front end being messed up. Anyways that is another thread in itself. But the tire shop I have been going to has had 6 computers sitting there in the front office since I have been going there. It is a family business. The first time I asked the son if he would be interested in selling them. It was a no-go. He said he was gonna get them all fixed and do something with them. Mind you these were dusty as could be and older xp machines. I believe one was a 98. Well anyways two trips later to the same shop. The son is out putting my tire on my truck. I thought to myself, "This will be a good time to ask the father. The man in charge. I started by giving him some cards and said I would be interested in buying the computers piled up over there. He thought I wanted to fix them. I said No id like to buy them. He said "OH! Well I can do that." I ended up paying 5 a piece. They were all complete and a couple had more than expected. So without making a short story long. Here are some pictures.

    https://www.dropbox.com/s/qft6swh33a...415_220714.jpg


    https://www.dropbox.com/s/mkwomx80xq...414_201013.jpg
    This is a big ole hardrive! I did a little reading on it. Are they anything special?

    Last edited by mudlight2; 04-16-2014 at 10:43 AM. Reason: ill learn to spell/type one day

  2. The Following 4 Users say Thank You for This Post by mudlight2:



  3. #2
    BroJer's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Phoenix-West Valley
    Posts
    1,004
    Thanks
    3,210
    Thanked 1,610 Times in 641 Posts
    I had 2 of the Quantums listed on fleecebay for a month with no luck. still have them laying around. they have sold before but now they are in the scrap-it-out-pile

  4. #3
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    You both may be getting a pm from FLimits about those bigfoot harddrives
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  5. #4
    BroJer's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Phoenix-West Valley
    Posts
    1,004
    Thanks
    3,210
    Thanked 1,610 Times in 641 Posts
    ohhhhhh goodie. hope it comes with some crown or honey jack

  6. The Following User Says Thank You to BroJer for This Post:


  7. #5
    armygreywolf's Avatar
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Germantown, WI
    Posts
    1,084
    Thanks
    193
    Thanked 2,064 Times in 649 Posts
    Yea, the big drives aren't exactly rare, but the higher GB (8+) sort of are. I see them once in a while on P2 or even pentium processor machines. Still a dang nice find.

  8. #6
    FLimits's Avatar
    SMF Badges of Honor

    Member since
    Jan 2014
    Location
    NY
    Posts
    459
    Thanks
    654
    Thanked 598 Times in 271 Posts
    The Bigfoot drives were sold as inexpensive storage back in the day. They're big because using the larger 5.25" platters enabled them to make drives with the same capacity as a 3.5" drive at a lower cost -- there are fewer platters, so there aren't as many heads. Because of the disk size, though, their access times are slow, and people used to call them "Slugfoot." A lot of OEMs used them because it was a cheap way to make a computer with an impressive amount of storage. They're definitely not the best drives of their time, and I think most of the people who are into old computers would probably avoid using them.

  9. The Following 2 Users say Thank You for This Post by FLimits:


  10. #7
    BroJer's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Phoenix-West Valley
    Posts
    1,004
    Thanks
    3,210
    Thanked 1,610 Times in 641 Posts
    figured. but, can I still have a drink? I do have a few other old drives I will pull and send pics FL.

    thanks for letting me hijack mudlight!

  11. The Following User Says Thank You to BroJer for This Post:


  12. #8
    mudlight2 started this thread.
    mudlight2's Avatar
    SMF Badges of Honor



    Member since
    Jan 2013
    Location
    Memphis TN
    Posts
    254
    Thanks
    179
    Thanked 273 Times in 98 Posts
    Quote Originally Posted by BroJer View Post
    figured. but, can I still have a drink? I do have a few other old drives I will pull and send pics FL.

    thanks for letting me hijack mudlight!
    Not a problem. I believe we both learned something. So that is what counts.

  13. The Following User Says Thank You to mudlight2 for This Post:


  14. #9
    FLimits's Avatar
    SMF Badges of Honor

    Member since
    Jan 2014
    Location
    NY
    Posts
    459
    Thanks
    654
    Thanked 598 Times in 271 Posts
    Wow, I just wanna say, I was writing my post in response to just the first two posts in this thread. But you guys are so fast -- or I'm so slow -- that something like three new posts slipped in there before mine. So now mine sounds almost rude, because I don't acknowledge anything in those posts -- cuz I didn't see them! This is what I get for goofing off and hanging around SMF when I'm at work!!

    Anyway, sorry guys, I would've been gentler if I'd seen what you'd written. But yeah, I know some folks get excited about those Bigfoot drives. Maybe a nostalgia thing. And they did come out with some BIG capacity for their day. Most of the dorky collectors avoid them, though, because they were basically just a way to make a cheaper (and slooower) drive.

  15. The Following 2 Users say Thank You for This Post by FLimits:


  16. #10
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    The lesson learned here I learned a long time ago as a salesman, you must ask the person who can say yes, all others are authorized only to say no.
    "anyone who thinks scrappin is easy money ain't doin it right!"

  17. The Following 6 Users say Thank You for This Post by EcoSafe:



  18. Similar threads on the Scrap Metal Forum

    1. Does anyone charge for pickups?
      By MvPElectronicRecycling in forum General - Let's talk business
      Replies: 19
      Last Post: 10-10-2014, 08:23 PM
    2. what would you charge
      By bigdog72 in forum Scrap Metal Tips and Advice
      Replies: 9
      Last Post: 07-31-2013, 12:39 AM
    3. how do you charge?
      By Libertytow in forum General - Let's talk business
      Replies: 40
      Last Post: 03-17-2013, 01:46 PM
    4. I'm in charge
      By Copper Head in forum A Day in the Life of a Scrapper
      Replies: 5
      Last Post: 08-21-2012, 10:25 PM

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook