Results 1 to 13 of 13

Computer parts ground ZERO

| A Day in the Life of a Scrapper
  1. #1
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts

    Computer parts ground ZERO

    I remember my first day I sold scrap I made good money enough to get the bug . But for sure now I could of cleaned the copper , and brass items , for less of a down graded price . goes the same for Aluminum . Now well I have the scrap gift of making money from the street .

    I had a need to go to NJ for a part drop off ( a Hydraulic cylinder for a trash truck )
    To really turn that day productive and help pass some time as they fixed trash truck part , I took copper brass aluminum Mix
    and some computers parts @ 41 pounds to a local scrap yard .
    Over all I hit $288.00 for my batches of - copper at $2.90 - bass $1.80 - Al .60 - mix .8 per # those items turned out very well as yard was not picky at all as to how clean items were . Really like brass was 10% steel with nuts and such and just took it as brass . same for AL and CU .

    Well the computer parts Hmm ok the yard guy said .75 then 1.00 then he went $1.50 per pound that would of been MB CPU MEM Cards as a mix .
    I went to a higher up manager and was told OK i'll pay $6 per pound for Mem CPU's and .75 for boards



    My lack of experience caused me to think MEM CPU's @ $6 lets doit

    2 pounds of MEM CPU did not light any fires so I walked away with $41 and change
    Then I complained that the original price of $1.50 would of been better and was told well that other yard worker made a mistake.

    SO oooo I see live and learn
    My question what would of been a fair general price if I sold what I did.
    Wile $1.50 seems low , and yet under the circumstances I wish I took that rate.
    I realize there are ways to fine tune what I sell but some times a bulk price is good to know to prevent what did happen this time .

    Any way my computer parts were all out of XP computers and one Pent Pro CPU and board
    I have plenty more & don't want to make that mistake once more.
    My gut feeling is $125 for that batch of 41 pounds or like $3 per pound for the mix of items would of been fair .
    Last edited by Copper Head; 07-16-2014 at 10:42 AM.


  2. #2
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Ship Ewaste to one of the buyers on the forum they pay better than any yard

  3. The Following 3 Users say Thank You for This Post by mikeinreco:


  4. #3
    ScrappinRed's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    texas
    Posts
    709
    Thanks
    319
    Thanked 710 Times in 342 Posts
    The two pounds of memory and the one pentium pro cpu ALONE were worth more than $40. You would be much better off selling to a buyer on this forum. Many have their prices clearly posted for reference...
    ~You have to start somewhere to get anywhere~

  5. The Following 2 Users say Thank You for This Post by ScrappinRed:


  6. #4
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    memory runs $13 a pound here in the buyer section...cpus can run $5-100/pound depending on what type....finger boards are $3 something a pound...so yep spend the time on here to know before getting RIPPED off again locally...

  7. The Following 2 Users say Thank You for This Post by webuyselltradestuff:


  8. #5
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    Sounds like 3.50 to 4$ per pound for a mixed batch or I should of walked

  9. #6
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Minnesota
    Posts
    128
    Thanks
    44
    Thanked 165 Times in 52 Posts
    Why settle for a 'mixed batch' price? If I would do that at one of my local e-scrap yards I would expect to be paid what the lowest scrap in my mix is. In your scenario that would have likely been a P4 motherboard. I haven't checked local prices recently, but seeing that P4 mobo's are bringing $1.90 a pound currently in the buyers section, $1.50 a pound local was a reasonable price (in my opinion.)

    But why settle for a 'mixed batch'? Sort that stuff yourself and get your money out of it. I think in the past you have mentioned an unwillingness to ship, but that doesn't mean you can't research those places prices and try to find someone close to those prices local. If you can't it doesn't take much space to save memory and cpu's until you do find someone to pay decent.

  10. The Following User Says Thank You to Caveman for This Post:


  11. #7
    jiffy117's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    Central NY
    Posts
    286
    Thanks
    220
    Thanked 341 Times in 147 Posts
    How can you have 1,400+ posts on here and not realize what prices you should have gotten? Not trying to be mean, just shocked is all. Hope you look through the buyer section so you don't get ripped off again. I printed out ewaste's price sheet and keep it by my work bench.

  12. #8
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    everytime I see posts like this it does 3 things. 1. makes me cry a bit inside because in this information age with every questions at your finger tips waiting to be answered, people still don't access it.
    2. makes me jittery not being able to expand fast enough to keep up with demand and 3. which is part of 2 being able to be large enough to help all these souls who want to make me even more money the room I need to buy these mixed items as people call it for $4lb cause the only thing I mix as scrap is paper plastic glass and trash lol

  13. #9
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    Quote Originally Posted by jiffy117 View Post
    How can you have 1,400+ posts on here and not realize what prices you should have gotten? Not trying to be mean, just shocked is all. Hope you look through the buyer section so you don't get ripped off again. I printed out ewaste's price sheet and keep it by my work bench.
    For better or worse I seem to function as a hands on experience type of guy , With a touch of lets get on with it .
    SO yeah I took some stuff in a trash pail for my official learning curve .
    BUT when I tighten up and know it , I know it like riding a bike .
    Clearly my mind set was still in the realm of Copper Brass and so on --- so when I heard $6 # for Mem and CPU -- My head was lets go , Once it hit the scale I knew the deal was bad
    but I was on a roll with $245 from Copper Brass - other -
    So I also just wanted to blow and get back to what ( job situation ) had put me into this new town .
    ---------------------
    What was interesting as always - no matter where one goes scrap yards can be found & as long as you got product your a customer .
    Last edited by Copper Head; 07-18-2014 at 12:22 AM.

  14. #10
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Sell them your bigger boards and ship the memory and CPU's to a buyer in a flat rate box. Probably get $100. in a $5.00 flat rate box from the P.O.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  15. The Following User Says Thank You to Mechanic688 for This Post:


  16. #11
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    not a single ewaste price that he quoted you is even CLOSE even after shipping costs...buyers here beat it hands down...I know it takes one of those experiences to realize how badly someone "gave" it to you...but it only takes once....The buyers forum will save you and MAKE you A TON of money for many items....really heavy stuff like power supplies...well whatever the yard gives you OR at least if they are hitting you with shred pricing, clip the wires off and then sell...cd drives, take the board out..hard drives...break them down and ship the boards out for $9-10/lb. I am ASSUMING you don't have anywhere remotely close that you can take ewaste...if you do, save what makes sense and make a trip like I do about once a month (for all my low grade boards, cd drives w/o boards, li-ion batt and LCD screens). Takes about 40 min to get there, but even counting my time at $50/hr, I make more then if I throw that in shred since my local yards don't buy or do ANY ewaste.

    And depending on the space you have and competition, YOU could start buying...start small with higher end stuff....arbitrage it out...ie buy for $1 and sell for $2.50....make $1 even after shipping. 100% profit after 3-4 days DOESN'T suck...even if you start with $100. Doubling that every week would allow you to get more and more after a bit and ship larger quantities (which will lower the cost of shipping too). Just a thought.

  17. The Following 3 Users say Thank You for This Post by webuyselltradestuff:


  18. #12
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    Quote Originally Posted by webuyselltradestuff View Post
    .I know it takes one of those experiences to realize how badly someone "gave" it to you...but it only takes once...
    A victory actually did occur , AND the fact that I actually sold some - compared to just hording and hording is a sign that finally I will sell .
    Next I assume if I can sell with the same WOW gratification that I get with Copper and Brass ( even AL and SS these days @ .60 )
    I may finally realize that finding a way to get computers is better then just happen chance finding and hording
    ----------------

  19. #13
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    Trust me..mailing off a small box of ram...in my case untested stuff...and getting a payment of $236...yep WAY better than the butt kicking it took to find or clean up that amount of wire or brass...you just have to get enough quantity...ie some accounts to pick up 20-40 towers at a whack...or have people drop it off to you (or even partner with a business that is eco friendly and have that at a drop off point)...ie I don't pick up 1 computer, they can drop it off (no money after time and gas).

    Try it and you will stop working REALLY hard to load that amount of steel and work a bit smarter...IMO of course...I only do steel occasionally since I an going to the yard with all the tower shells anyways but I STOPPED that stuff after I saw the return on investment...ie ALOT OF WORK for relatively little reward (I have a $40-50 per hour rate on my time or I don't do it)...but everyone is different...you have to put a value on your time and what you want to make, that being the FIRST thing you do when starting to treat it like a real business....just a suggestion
    Last edited by webuyselltradestuff; 07-20-2014 at 12:46 AM.

  20. The Following User Says Thank You to webuyselltradestuff for This Post:



  21. Similar threads on the Scrap Metal Forum

    1. Computer parts Breakdown and identification
      By PartTimeScrapper in forum E-Waste Grading and Identification
      Replies: 117
      Last Post: 07-16-2016, 09:32 PM
    2. computer parts
      By timy in forum Scrap Metal Tips and Advice
      Replies: 7
      Last Post: 12-06-2012, 06:00 PM
    3. Question on computer parts
      By justjunkin in forum General Electronics Recycling
      Replies: 14
      Last Post: 04-23-2012, 02:04 AM
    4. The different parts inside of a computer
      By easyrecycle in forum General Electronics Recycling
      Replies: 0
      Last Post: 09-25-2011, 10:12 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook