As in a database , I am going to see if any one wants to build this one POST or THREAD into an ongoing spot to ask a question that might be redundant , so it can just stay here .
Metal Recycling Entrepreneur
|
As in a database , I am going to see if any one wants to build this one POST or THREAD into an ongoing spot to ask a question that might be redundant , so it can just stay here .
Metal Recycling Entrepreneur
|
|
How many cd drives does it take to make a pound of boards ?
that I hear are very high quality .
|
Is this your question or just an example? If it is your question, I don't know how many boards it would take to make a #. Like any other boards some are bigger than others so you would have get an average weight. They are mid grade boards to my buyer.
Metal Recycling Entrepreneur
|
|
I have cd drives coming out of my ears . I also have a lot of copper bearing to sell yard pays in the area of .18 cents per pound .
I am thinking to just put the intact drive in, and sell at .18
Metal Recycling Entrepreneur
|
Take the green boards out they are a decent sell to our buyers here on the forum.
I think ewasted buys them around $3/lb
Metal Recycling Entrepreneur
|
|
I need see how many to make a pound , once dismantled cd drive it's mix .Originally Posted by Longhairboy
Some times if i have a large load of motors ( that I do ) I have also put them as such.
but the ratio is 1 cd drive to 12 vac motors ,
need to get to the 400 pound range more weight more forgiving of the fluff motors
.27 .28 per pound
those boards might only weigh 3/4 ounce each
I have held them a silver dollar feels heaver
I bet it takes 20 drives to get a pound
A cd unit weighs 2 pound
at CB price about 36 cents X 20 7.20 bucks
at motor price 55 cents X 20 = 11 bucks
so if 20 boards = 3 bucks
then remaining weight of the mix = 3.25 bucks
total $6.25
Last edited by Copper Head; 08-05-2014 at 01:14 AM.
|
I don't know how you're able to throw those in with motors, but if you can - do it. I'd even just go for copper bearing price if you can get it for them.
Metal Recycling Entrepreneur
|
|
I am not trying to imply selling false items that are not a true Representative but mass weight with Motors CB AL SS the yard is more forgiving to the percentage of the product
So you have to really have weight at least 400# motors alone , real copper type (let them CU windings show) then salt and pepper the load . with a few large dismantled transformers , CD units , the load has to be large so it just gets swooshed off the truck . good enough done.-
Last edited by Copper Head; 08-05-2014 at 07:44 AM.
|
|
I don't understand this, I've never heard of a yard paying copper bearing price cd drives. They have very little if any copper so if your telling us that your sneaking these in with your copper bearing items then your being dishonest and dishonesty will get you nowhere. Just my .02
Metal Recycling Entrepreneur
|
|
Dishonest nope . Rite of passage .
Of coarse a yard wants the best product copper motors juicy copper bearing , So who delivers ? scrappers,
thousands of pounds of vac motors , washer motors , oil burner motors You name it . found it . CD are motors , thats no lie , they also have copper .
I have not visited a scrap yard that did not have an angular view of how to manipulate . Being one with there flow is fair . After all I have to pull off the main thing
lots of motors , have you an idea of how many Vac i sledge up, then dealing with the plastic , the mess , Oh yes they will take some salt and pepper to help in the continuation of a quest that benefits them .
The quest is I stop for ALL vacuums as I drive . TV's also . I only sell to them unless out of state
Car insurance - fuel - this is no joke out there to keep going
In a sense I work for them - I'm one of there boy's . It's all metal and all good.
Now I have heard stories from scrappers from there mouth and they laugh as they tell me .
Bricks in micro waves
dirt and cement in washers
water heaters in winter frozen and full
that is what I see as dishonest
I'll make it clear THAT I NEVER DO heck they get dissembled stuff from me from my wire and motor quest.
Last edited by Copper Head; 08-05-2014 at 09:59 PM.
Metal Recycling Entrepreneur
Dude if you can get CBM or really anything better then shred price for CD drives you are doing well. The ones I have taken apart recently are mostly plastic. The actual motors in them are quite small. I have been pulling the bottom plate off to remove the board and any easy to yank motors. Then re-attach the bottom plate with one screw and send it to the shred pile. I would break them down more, but my yard accepts 30% plastic with shred. The CD drive in my opinion is more than 30% plastic, but after mixing with other much cleaner steal my load is usually well under the 30% limit. Sounds like you could do about the same thing and add them to your CBM pile. By removing the board you wouldn't be removing the motors, either.
Metal Recycling Entrepreneur
|
To answer your question, from my very unscientific test around 8 half length cd boards or around 5 full length boards (if you can find them anymore) make a pound. Currently the price per lb from my buyer is $3.30/#.
Urban Mining: When people give you free money.
|
Do these pants make my A$$ look big? LOL
Come on, lets post questions often asked!!!!!
Last edited by hobo finds; 08-06-2014 at 02:43 PM.
Video game ninja
|
Can anyone give me a history lesson on Kris Kringle or skippy ? Thanks just curious as to where they went .
|
|
Copperhead was here befrore Skippy! And here is a good Skippy quote... Kris Kringle can you please define GUMPTION?
|
Taking apart CD drives is a time consuming, losing battle. Yes the buyers pay good on the boards. I did the math/breakdown on 500 pounds of drives, and in the end the amount gained from hours of work was about 35-40.00. Now I wait until I have a full gaylord and sell them as is. I can do something more productive in those several hours and end up making more than I would have breaking down the drives.
|
hahahahaha i usually just drive right by the autocorrects but this one was priceless!!
Sledgehammer Enthusiast
|
Q: How much gold is in a computer?
A: Not enough
There ain't nothing wrong with an honest days work. Anyone who says otherwise is a fool.- Old Man
|
|
Q: Whats a gaylord?
There are currently 10 users browsing this thread. (0 members and 10 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks