Congrats! I still can't find a surplus auction to go to, other than cars.
Congrats! I still can't find a surplus auction to go to, other than cars.
|
I love curbco and with everyone leaving stuff now this load was mine even after I waited for the rain/ice to stop last night and its a good trash day for scrappers its just still there for me but the bonus kicker was I found 3 computers and a server nothing special in one spot but the kicker was almost 2.5lbs of memory I found in a tiny grill of all spots lol not even in the same area as the computers lol also about 100 of these aladin safe word key coded door things I was reading a bit about there older and half don't work but throwing up on ebay for them fishes to bit at and see if they sell
Metal Recycling Entrepreneur
|
Those college kids must be living large in your burg...
Experienced Scrapper
|
Originally Posted by BigJon
That makes sense and can pay-off. Take a student for this work. Share the profit with him to avoid an hourly rate. Plus, he brings more motivation on that job.
|
|
prices may be low but this little bit is still worth $157.80 there was a smaller tub with those stainless/ext alu heatsinks so it would have been more but with not a lot of buyers around I have to settle for dirty alu for those and with so much going for so little right now these alone covered the cost of the last 4 pallets I bought
|
|
I love surprises. went to an auction yesterday and picked up a pallet of computers which on the outside look like just regular dell optiplexes and tore it down and there were a few older ones including these 486's Pentium and not show here lol but also a fun duel socket p3 and some nice cards to go with these as well
|
Don't forget the Buyer in Ohio does buy those if you want to fill up a box with other escrap. Not too bad of a price compared to my local yard at dirty alum price.here was a smaller tub with those stainless/ext alu heatsinks so it would have been more but with not a lot of buyers around I have to settle for dirty alu for those
|
Nice pics, Travis! Rootin' for more. (((root root)))
|
|
that's true but my dirty alu price beats what I could get because of shipping
Metal Recycling Entrepreneur
|
travis, I asked at my yard and they said they will take the alu fin with copper pipe heatsinks as clean alu rads. I think they just doing me a favour because I never have a lot of either one, but it never hurts to ask.prices may be low but this little bit is still worth $157.80 there was a smaller tub with those stainless/ext alu heatsinks so it would have been more but with not a lot of buyers around I have to settle for dirty alu for those and with so much going for so little right now these alone covered the cost of the last 4 pallets I bought
METAL IS MY MISTRESS...PLEASE DON'T TELL MY WIFE!
|
|
oh ya no this pic does not show the other bin there are some in the one that I sorted out but I get dirty alu @$0.45lb as for my rads I get full price at least here @ $1.15lb its not really a yard I go to for these the specialty scrap company that picks up from me has many grades for everything I call it dirty alu they grade it as 15% MIX at this price since its the highest price for dirty
Metal Recycling Entrepreneur
Keep on keepin on, Travis. I'm trying to tap into ewaste in the worst way... bought a truck today. Time to get to it!
|
|
got a box of boards dropped off with these fun ones inside the mix a couple of gold ic's and nice boards and such which I tried looking them up and the best I could come up with was there out of a xray controller box says ion source display on the one and artwork numbers. its a sweet one with many of the plug and play ic display chips put it on ebay and got a watcher already so will see if it sells I only listed it for $25 since I don't know much about it but if not it will go into the collection. still trying to find the official name for the display chips lol
Metal Recycling Entrepreneur
|
|
travis always has fun finding new & different boards!!
|
|
not to bad dropped it to $15 and sold on ebay in a daygot a box of boards dropped off with these fun ones inside the mix a couple of gold ic's and nice boards and such which I tried looking them up and the best I could come up with was there out of a xray controller box says ion source display on the one and artwork numbers. its a sweet one with many of the plug and play ic display chips put it on ebay and got a watcher already so will see if it sells I only listed it for $25 since I don't know much about it but if not it will go into the collection. still trying to find the official name for the display chips lol
|
|
I do love tape drives and units even the smaller ones like the one these 8 cartridges came from cause they sell fast and parts sell high even these untested used sold for $20 plus shipping but I love auctions for these cause most pass them up so easily like this one I got for a whopping $1 most have a bad motor or control board so I save a lot of parts to fix others and sell fully loaded
|
|
picked up another pallet yesterday at the auction 65 computers total 11 laptops and found a few nice goodies in it some black fibers and p3's but these 3 goodies were a bonus that will at least pay for it maybe even double it the asus p3 black fiber combo I have not seen in a while.
|
|
so I always see stash cans and secret boxes and I got this cube in totally ruined inside for resale and as prices go for these on ebay shells I figured I had an idea for a box a made a crude taped version to try and sell but mostly going to give it to a friend as a funny gift for his room lol
Get some seat cover tape and then some cheap seat covers. Mike
"Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}
Now go beat the copper out of something, Miked
|
|
movie day was not to bad I like doing stuff while I watch tv and other things most of the time but here and there I do movie days were I watch 5 movies and tear down hard drives. its fun and productive even though I make no were near what I could have its relaxing and a great way to still make money.
spent 9 1/2hrs and still only did 76 drives which aint bad but so many had strippy screws this time and so many I still have to break the motor out of but still did ok for the day.
my breakdown:
7lbs platters @ $2.30lb= $16.10
12lbs magnets @ $1.50lb= $18
23.5lbs cast @ $0.30lb= $7.05
9.5lbs motors @ $0.12lb= $1.14
6oz rings prices vary to much to price so low amount
total of $42.29 about $4.45hr to watch movies
fyi movies I watched were:
back the future
a million ways to die In the west
project almanac
wrong turn 6
Cinderella this years version with lily james
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Register To Reply
Bookmarks