Just a stubborn old goat

Overkill forsure...............efective? Hell yeah!!

Stubborn can be good (in certain cases)!!! What's the main story (myth?) about Thomas Edison, that it took him a 1,000 tries at the light bulb??

If you can find an effective and fairly quick way to take off the heavy insulation and remove the steel wire core of ACSR (I think its either 5 or 6 Al strands around the single steel one?), it might be worth it. My non-ferrous guy is giving 56 cents for clean Al wire compared to a quarter a pound for ACSR

Then again the heavy insulation is about what, 40% of the weight?? If so 100 lbs. of straight ACSR would get ya $25 and 60 pounds of clean wire would yield $33.60. So the exact percentage of the insulation probably becomes fairly significant (and how fast the steel core strand can be removed). Good luck on whatever you do!!

Originally Posted by DakotaRog

Stubborn can be good (in certain cases)!!! What's the main story (myth?) about Thomas Edison, that it took him a 1,000 tries at the light bulb??

If you can find an effective and fairly quick way to take off the heavy insulation and remove the steel wire core of ACSR (I think its either 5 or 6 Al strands around the single steel one?), it might be worth it. My non-ferrous guy is giving 56 cents for clean Al wire compared to a quarter a pound for ACSR

Then again the heavy insulation is about what, 40% of the weight?? If so 100 lbs. of straight ACSR would get ya $25 and 60 pounds of clean wire would yield $33.60. So the exact percentage of the insulation probably becomes fairly significant (and how fast the steel core strand can be removed). Good luck on whatever you do!!

Dakota
This wire didn’t have the center steel wire. It was 7 stands of 12 gauge Al only.
Printed on the insulation: (ALCAN B 2 AWG AL XLPE 600V
I only stripped about 35 feet to see if my planer would strip that nasty PVC. It worked OK but if I every use it again for stripping heavy insulation it will be for COPPER wire on a longer 2x10x12 board at least.
From the 35’ of Al wire I stripped I ended up with 2.5 pounds at .55 for clean EC Aluminum.
The rest of the wire is going in as Insulated!!!!!!

CH
I called it overkill because of the size & weight of my planer. My planer is a Rockwell 653 versa planer, the Cadillac of door planers in it’s day. A smaller planer would have been a lot easier to handle that’s for sure. But without the horsepower and carbide blade I think a HF planer would self destruct if the blade got bound up in the wire.

ya once I got tired of doing it by hand for most of my life I bought a electric stripper a few years ago now and it paid for itself in just a month or so and it eats it faster than I can supply it lol

ACSR is not usually insulated. It is the bare overhead primary wire. The triplex, etc. secondary or service wire does not need the steel reinforcement wire as the spans involved are generally shorter than primary. (I purchase for an electric cooperative.)

couldn't resist...title of a thead like this deserves a goat.

Sirscrapalot - You gonna eat that? - A goat.

Sirscrapalot - I got your goat.

I had some wire similar to that but was finally able to remove the insulation with a knife but it was still hard to do.

Originally Posted by Sirscrapalot

Sirscrapalot - I got your goat.

SO
Besides crossbreeding goats with gawd knows what?????
What other strange things do you do on that sand bar of yours?????

Fill an then empty my cooler of beverages.



Sirscrapalot - Keeper of the traveling cooler.

LOL

I knew you wouldn't be far along.

Sirscrapalot - You would have seen this derailment coming but I used my Pirate ninja stealth skills.

Why does the old Vbulletin Admin in me keep telling me that some of this thread is going POOF. LOL

Who knew goats could be so **** funny.

Sirscrapalot - Love is not love, without a violin playing goat. - Julia Roberts