Results 1 to 14 of 14

Another truck decision

| A Day in the Life of a Scrapper
  1. #1
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts

    Another truck decision

    My Tacoma makes me very happy & when I'm out and about I don't think twice to use it for some fast finds that can't damage truck
    all in all it's a pick up .
    But for real down and dirty that truck is not the truck to use

    My $150 Ranger runs but is moody & can run perfect or like complete crap but I get around
    the rear frame has & is cracked
    so the bed flexes , one of the Cat's gets red hot , But I really like this crap box . The truck has made plenty of money
    & easily paid for it self ( it's a rust bucket ) it got me thu the cold snowy winter & the 4X4 was unstoppable
    the truck is some what fixable (adds some time till it's end)
    All said and done not really big enough for my stile of scrapping . It's not the big money maker type of truck
    making $150 with proper select metals is doable But ...................

    My next find Ok i'm excited I found a 1986 Dodge 100 ram pickup
    with 3 speed manual & Slant 6 , It's got an 8 ft bed
    Some rust but not to bad . The Interest I have is the slant 6 & stick
    I feel this truck has the balance of Size MPG and no worry use .
    the seller wants $600 to $700 . This Saturday I will hear it run & try is out .
    Any body ever have a full size truck with Slant 6 ? Can I expect good MPG ?
    I drive slow . I like trolling for scrap , good MPG is important & room to hold
    So how is the MPG ?

    Last edited by CopperHeadAKA; 04-05-2017 at 10:58 PM.
    http://www.scrapmetalforum.com/members/copper-head.html
    Copper Head and CopperHeadAKA (same person)
    I am back to my skill set from the 80's Painting & all that follows it
    I removed myself from the trash company I worked for as of 2 years ago
    I find scrap non the less


  2. #2
    SMF Badges of Honor


    Member since
    Jun 2016
    Location
    Crowley louisiana
    Posts
    131
    Thanks
    30
    Thanked 134 Times in 60 Posts
    Sounds like the ranger runs bad because of a stopped up catalytic converter, if it's glowing. I had a 99 ranger with the same problem, I cut the converter off gutted it and had it welded back on, didn't have any probes after that, you can have the frame welded up when they put the converter back on. As for the dodge, I been living at our house for 19 yrs and my neighbor has had one since we built here. His mpg isn't as good as my ranger, but his payload capacity is more the mine, is beat up, but seems to run fine, and besides changing the tranny, I've only seen him do minor repairs, water pump and alternator, and plugs and wires. Best of luck from Louisiana.

  3. #3
    EDC76's Avatar
    SMF Badges of Honor


    Member since
    Jul 2015
    Location
    Steelton, PA
    Posts
    158
    Thanks
    247
    Thanked 172 Times in 78 Posts
    The slant 6 Dodges aren't as fuel efficient as one might think.

    I've known a few people that had them. One was in a late 70's D100 pickup, he said it got a little better mileage than the '78 Chevy 3/4 ton 4wd 350 4 speed he had before it.
    The other one was in a '81 Diplomat sedan with the automatic. That one got 15 mpg all the time.


    If you want a bigger truck that gets decent mileage, look for an F-150 with a fuel injected 300 straight 6.
    Last edited by EDC76; 04-06-2017 at 01:32 AM.

  4. The Following User Says Thank You to EDC76 for This Post:


  5. #4
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    Thanks for the tips , sure if I could find a big old ford I'd get one . For now I'll see how the dodge runs on Saturday .
    Ive seen my ranger run perfect ( like a Gem ) so I know it's got it, in it to run .
    I don't bother doing actual MPG test , I use the seat of my pant test . The ranger is decent , i'll put in $5 / $10 and drive here & there
    & it's kinda at the edge of great fuel MPG and kinda OK . I had two 318 dodge pickups previous , those were like a bottomless pit
    of fuel consumption . That feeling of fuel again !!! man I only drove 12 miles .
    Because this D100 has a 3 speed stick , I feel great MPG is doable with classic old man driving stile but you have to be willing to Chug around
    very slow using low end torque , Idle time fuel consumption is when you can match your Idle time fuel consumption with chugging around
    you begin to associate Time as fuel consumption instead of mile traveled .
    When you hunt for scrap Time as fuel consumption is the truth . as well as a long line of cars behind me wanting to pass
    Last edited by CopperHeadAKA; 04-06-2017 at 06:40 AM.

  6. #5
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,591
    Thanked 7,218 Times in 2,256 Posts
    From my experience, regardless of the brand when ever you go to a full size pickup, whether you have a six cylinder of a V-8 the mileage will not be great. Given your priorities I would look for a pickup box trailer or build one to tow behind your present truck. Tatorjuice has a thread where he documents how he builds his. I build a lot but have not taken the time to document them. This will give you the flexibility of good fuel mileage when the trailer is not needed, the ability to haul larger loads, and a place to store scrap until you have a full load.

    Using scrap trucks I have built trailers for as little as $ 20 (coupler, cutting torch gas and welding rod) and as expensive as $ 200 (includes new tires.) You could always buy the truck and when it dies, build a trailer out of it.
    Give back more to this world than we take.

  7. The Following User Says Thank You to Patriot76 for This Post:


  8. #6
    armygreywolf's Avatar
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Germantown, WI
    Posts
    1,084
    Thanks
    193
    Thanked 2,064 Times in 649 Posts
    I did a complete tune up of my truck (Cummins diesel) right down to removing, dissassembling and cleaning injectors, did a valve adjustment and then all the o rings for the crossover tubes. I keep careful track of the mileage, and it's always been 18.5 now it's just shy of 20. Not bad for half a day's work.

    Look for a 4.8 v8 long box regular cab 2wd chevy half ton. Of all the half tons it will be the lightest and get the best mileage. Put take off highway tires on it, tires that are a few years old are usually harder and have lower rolling resistance. The 4.8 is short stroke motor and like any LS engine it's pretty easy to keep up with. I had a older version when I was 18, a 95 cheyenne and it had a tbi 305 in it, the truck was great but the engine was garbage...
    WI ITAD LLC, IT Liquidation Services, we remarket, buy and sell scrap electronics No customer too large or small!

  9. The Following User Says Thank You to armygreywolf for This Post:


  10. #7
    EDC76's Avatar
    SMF Badges of Honor


    Member since
    Jul 2015
    Location
    Steelton, PA
    Posts
    158
    Thanks
    247
    Thanked 172 Times in 78 Posts
    Quote Originally Posted by armygreywolf View Post
    I did a complete tune up of my truck (Cummins diesel) right down to removing, dissassembling and cleaning injectors, did a valve adjustment and then all the o rings for the crossover tubes. I keep careful track of the mileage, and it's always been 18.5 now it's just shy of 20. Not bad for half a day's work.

    Look for a 4.8 v8 long box regular cab 2wd chevy half ton. Of all the half tons it will be the lightest and get the best mileage. Put take off highway tires on it, tires that are a few years old are usually harder and have lower rolling resistance. The 4.8 is short stroke motor and like any LS engine it's pretty easy to keep up with. I had a older version when I was 18, a 95 cheyenne and it had a tbi 305 in it, the truck was great but the engine was garbage...

    I currently run a 12 valve Cummins,and can agree it has a small appetite for fuel for a truck it's size.

    My dad has a '99 Silverado with the 4.8 and he loves it. He's had it for 14 years, hands down the longest he's ever owned a vehicle.

  11. #8
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    Quote Originally Posted by Patriot76 View Post
    From my experience, regardless of the brand when ever you go to a full size pickup, whether you have a six cylinder of a V-8 the mileage will not be great. Given your priorities I would look for a pickup box trailer or build one to tow behind your present truck. Tatorjuice has a thread where he documents how he builds his. I build a lot but have not taken the time to document them. This will give you the flexibility of good fuel mileage when the trailer is not needed, the ability to haul larger loads, and a place to store scrap until you have a full load.

    Using scrap trucks I have built trailers for as little as $ 20 (coupler, cutting torch gas and welding rod) and as expensive as $ 200 (includes new tires.) You could always buy the truck and when it dies, build a trailer out of it.
    My recent Dodges I let them go at the correct time . The Ranger at $150 was a - how can I go wrong truck . But it's not big enough Some metal is fine but oven's or fridges it's full, not to mention mine can't really safely carry to much weight .
    I hunt for scrap casually any place I go , I look ( and find ) so to keep Ranger & always have a trailer on it is not gonna work . But hell yeah I'd like a trailer to load up for a trip to the yard wile a load is in pickup bed also . I stopped using Ranger I don't want to chance a need of help from a tow .
    I am renting a 10 by 5 trailer from u hall $30
    I'll take cats off AL wheels off & try to bulk it to 5500 pounds and use Tacoma to take to yard
    That money will go towards a full-size 8 ft bed pickup be it the Slant 6 dodge or another oldie
    It has to be a 6 in-line or V-6 . I can float a 6 cylinder to decent mileage
    V-8's even driven slow equal time of use my 318 dodges used 2 gallons per hour I'm done with V-8's
    Last edited by CopperHeadAKA; 04-06-2017 at 05:59 PM.

  12. The Following User Says Thank You to CopperHeadAKA for This Post:


  13. #9
    armygreywolf's Avatar
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Germantown, WI
    Posts
    1,084
    Thanks
    193
    Thanked 2,064 Times in 649 Posts
    Well there are other options. f150 with the 4.9 i6 but keep an extra ignition module in the door pocket lol. Other options 4.3 v6 half ton chevy, good for trolling around, astro van would work too.

  14. #10
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    I heard good stuff on the 4.3 V-6 , from what I heard the 4.3 is the famous Chevy 350 with 2 cylinders removed .
    and that basically is the math ,
    Chevy 350 is 5.7 liters. each 2 cylinder section equals 1.425 liters
    1.425 liters X 3 = 4.275 liters hence the fine 4.3 V-6


  15. #11
    EDC76's Avatar
    SMF Badges of Honor


    Member since
    Jul 2015
    Location
    Steelton, PA
    Posts
    158
    Thanks
    247
    Thanked 172 Times in 78 Posts
    Yep. Before the 4.3 there was the 229 Chevy V6, which was a 305 with 2 cylinders chopped off.

    Dodge 3.9 V6 = 318 V8 - 2 cylinders
    Dodge V10 = 360 V8 + 2 cylinders and the stroke increased by .3"

  16. #12
    armygreywolf's Avatar
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Germantown, WI
    Posts
    1,084
    Thanks
    193
    Thanked 2,064 Times in 649 Posts
    Yea, they are good, avoid the CPI at all costs, the spider assembly for the fuel injection is under the manifold and leaks, even the updated assembly leaks. Instead either go for a early TBI or later rail style (in trucks that would be 2003+).

    The old body style ford is probably your best bet, getting one with a 4.9 and tall gearing will save the day. Do a tune up right away, have an alignment done too, from there it should be problem free for a very long time, the engines are pretty much unkillable, the japanese transmissions not so much but at this point its old enough to have had that crap swapped out.

  17. #13
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    I decided on the year 1985 and 1/2
    Dodge with 84,000 miles. (in 2 wheel drive)
    Since it's there & ready for purchase,
    It's nice running , a little ruff here and there, but perfect for junking .
    It's got a big bed , helper springs . It's a no brainer ,
    I scrap , I need room to scrap with a truck, I worry not to dent up .
    All said and done the Slant Six is a legend of a motor . The Trans is 3 speed manual with overdrive .
    Driven responsibly slow & the 6 kinda forces you to drive responsible
    I just know it wont get worse - time use - fuel consumption then
    my recent past 318 V-8 dodges
    with hunting stile scrapping , it's about how much fuel is needed
    in 4 or 5 hours rather then how far you drive in that time.
    With hunting , idling & slug slow driving or motor on off as you pull items out from a dumpster
    can be strong fuel consumption for some motors.

    With all due respect to a V-8 , once I had no choice but to take my old scrap truck to Long Island,
    A 280 mile drive each way . I was concerned , local driving fuel consumption
    gave me reason to brace my self for the worst.
    The worst never happen . I was reminded how a V-8 on the HWY pulling a 6000 pound truck
    comes into it's own
    I floated along at 75 MPH with no effort
    The fuel needed in 4 1/2 hours was $45 or $50
    not much more then my V-6 minivan.



    One hundred down last night ,next is to sell Ranger to yard to
    pay off Dodge . This will be my third Dodge I guess I'm a Dodge man .
    Last edited by CopperHeadAKA; 04-10-2017 at 07:30 AM.

  18. The Following 2 Users say Thank You for This Post by CopperHeadAKA:


  19. #14
    ScrapmanIndustries's Avatar
    SMF Badges of Honor


    Member since
    Feb 2017
    Location
    Easton, Pa
    Posts
    361
    Thanks
    99
    Thanked 303 Times in 132 Posts
    Copperhead what part of Pa are you from? If you need that ranger fixed I got a torch set and welder. and If you decide that it isn't worth fixing but don't want to get rid of it I make trailers out of truck beds, the first one I made was the best/straightest tracking trailer Ive ever had to pull even compared to dealer bought trailers. this last one I made pulls straight but the frame was so twisted from the wreck that it was hard to tell if the coupler was perfectly square. I'm located near Allentown. and might even be willing to sell the blue s-10 trailer once I get the lights wired up.
    Attached Images Attached Images   

  20. The Following User Says Thank You to ScrapmanIndustries for This Post:



  21. Similar threads on the Scrap Metal Forum

    1. Score, motherload, or otherwise awesome thread. - Just got a truck!!
      By DevinThaScrapper in forum A Day in the Life of a Scrapper
      Replies: 23
      Last Post: 02-21-2015, 10:06 PM
    2. To buy a truck or not buy a truck, that is the question.
      By dshrader in forum Scrap Metal Tips and Advice
      Replies: 17
      Last Post: 04-09-2014, 11:09 AM
    3. large truck vs small truck?
      By jennija in forum Scrap Metal Tips and Advice
      Replies: 18
      Last Post: 01-26-2014, 06:00 PM
    4. stupid decision
      By thescrapDon in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 07-13-2012, 12:41 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook