Results 1 to 15 of 15

Just Got a Call

| A Day in the Life of a Scrapper
  1. #1
    Kris Kringle
    Kris Kringle started this thread.

    Just Got a Call

    Just got a call from a Lady she said she had this bunch of scrap metal and wanted to know what I pay. I told her I pay by the Load and that Depends on what she has then she asks how much a LB would I pay for Iron I told her it was hard to gage what she had {I was Gone to Tell Her I would be Out to check it Out} Then Lightbulb went on I asked where she was she said 45 miles from me {{Whew}} So I told her the only way I could tell her what I would Pay is if she could Email me a Few Pictures of the Load She Said she Would. So guess I will See. I Guess my point is with this post is Like I Told her on the Phone I would come out and Inspect the Load and make a Offer But If she didn't Accept the Offer I would be out 2 Hr Drive Time and Gas Money.


  2. The Following User Says Thank You to Kris Kringle for This Post:



  3. #2
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Live and learn. In order, my first two question are ALWAYS:

    Where are you?
    What have you got?
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  4. #3
    ComputerScrapper's Avatar
    SMF Badges of Honor


    Member since
    Mar 2011
    Location
    Portland, Indiana
    Posts
    497
    Thanks
    18
    Thanked 320 Times in 145 Posts
    This is probably one of the most difficult parts of the job....We get calls all the time and we ask how much do you have but the way that people view things can vary greatly from person to person. We have gone to some client locations expecting to fill a box truck only to get there and find out that everything would have fit into our minivan....Then the opposite is true as well.

    With gas prices the way they are we all have to be very careful....

  5. #4
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    I just wasted a trip on Friday to go take a look at 2 vehicles and a pile of scrap metal.

    Looked it over the best I could since some was hidden in weeds. After calculating time/fuel I came up with a number I thought was fair.

    He declined, said he has a buddy at the local yard (local to this town is minimum 25 miles) that would pay "at least a $1,000" plus the 2 cars.

    Ok, sure...then why didn't you just go with him to start?

    Though I suppose in his defense, he thought I owned a scrap yard, as per the person that referred me to him of whom, I have never heard of, much less done business with.

  6. #5
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    When you are going to go take a look at a pile of scrap that you only hear about but did not see any photos tell them you can only go there and take a look and the pick up date would be another day an then take a small car/motorcycle something like that.

  7. #6
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    I have a mini van for previewing pick ups. Had I taken the truck and not gotten the job I'd be super pissed, since it would have been about $60 round trip.

  8. #7
    Kris Kringle
    Kris Kringle started this thread.
    Well needless to say she Didn't send any Pictures. As far as Viewing the Stuff I have a little S10 that I do Intial Runs to View stuff with But the way I am seeing it today Most Everyone has a Cell Phone with a Camera built in it never hurts to ask them to send Pictures of the Load that way it could give you a Idea of what your dealing with. Not only that the way I see it today with People it could be my Competetion and they could be sending me on a goose chase to someplace that there is no Scrap Or Hell it could Be a Set up you go there expecting Scrap And they Rob you. I know that sounds Paranoid But the way I am looking at People today You just never know whats on their minds. Its kinda like where you read about cab drivers picking up a Customer and then the Police get a call and the driver is Shot Dead I know this sounds Extreme But then again you just never know

  9. #8
    Kris Kringle
    Kris Kringle started this thread.
    Just got a Knock at my Door was the Lady that had the scrap they bought in a 24 Ft Goose Neck and a 16 Ft Flat Bed full of scrap Contents was

    1, 7 55 Barrels of crushed cans
    2, about 75 Sheets of Couragated Sheets of Galvanized Siding
    3, Oven
    4, Some Kinda Steel Frame
    5 sheet of Diamond Plate Aluminum 4x5
    6, 250 Gal Diesel Tank
    7 Bunch of Fence
    8, Few Pots and Pans
    9, 6 Sets of Steel Dually Wheels
    10, some old Misc Farm Equipment


    I think I will Sell most of the Stuff instead of scrapping it out.

  10. #9
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Sounds like a good "lot" of stuff.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  11. #10
    Scraplogic's Avatar
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Greater Twin Cities Metopolitan Area
    Posts
    61
    Thanks
    42
    Thanked 29 Times in 19 Posts
    It's always funny when people say they have "A lot!" They often can't fathom the weight it might be, so ask them to reference their pile of junk in terms they can understand. Speak their language. Some examples.

    Can it fit in a milk crate or recycle bin? Two bins? Kitchen garbage can size?
    Would it fill the back seat of a car? The back of a mini-van?
    Will it fill the back of a pick-up truck, or better to bring a trailer?
    And work your way up from there, for the car hauler and big machinery folks.
    As soon as you start asking like this, they can more easily describe their "lot" of stuff.

  12. The Following User Says Thank You to Scraplogic for This Post:


  13. #11
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    That's why I ask WHAT have you got rather than HOW MUCH have you got. I can figure out the "how much" from the "what".

  14. #12
    c4f5's Avatar
    SMF Badges of Honor


    Member since
    Mar 2011
    Location
    northeast CO
    Posts
    387
    Thanks
    112
    Thanked 149 Times in 89 Posts
    Kinda like this guy a few days ago. I could make him understand that his 6 cylinder 1/2 ton cargo van does NOT weigh 6 tons. He insisted that I was being ridiculous by telling him it was alot closer to a third that weight..

    Or just last week, I did a small iron cleanup & paid by the ton. Went to the nearest scalehouse, about a mile away, for a ticket, came by & loaded up. I looked at the pile & said there was probably 3.5-4 tons there. He was just dead certain there was at least 10 tons if not more. Well, guess what...it about 4.25 tons. He just could not believe it, and was disappointed.

    Most folks really have no clue on weight.......after so many years of scrapping, you can look at a pretty big pile & guess within a few hundred pounds.

  15. #13
    Kris Kringle
    Kris Kringle started this thread.
    You all are correct its in how you ask. Needless to say the Guy that bought in the stuff wasn't to happy at what I offered him for it {They Never are} I told him I could give him the number for a guy up the road that could pay him better then what I could. He said if I had known it would of paid this much I would have called you to come pick and load it up I told Him I told the lady that called me to send me Pictures and I could quote him the price I would Pay. So anyway before I started to unloaded it I said you sure you don't want to take it up the Road and get more then I could pay he said No thats ok then he became friendly again. Imagine that

  16. #14
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Quote Originally Posted by Kris Kringle View Post
    could Be a Set up you go there expecting Scrap And they Rob you. I know that sounds Paranoid But the way I am looking at People today You just never know whats on their minds.
    Get you CHL and take it with you where ever you go. Anyone in my company who has the money box is packing alittle something an they have all had training in the use of the weapon. You can never be to safe with your money at this day and time.

    Our trucks are set up like this. Truck safe with money inside it (its chained to the truck an its not something you can just "sneek" out of there easy with out causing some noise.

    I carry a Smith & Wesson Sw40ve (.40cal ) or a Glock 23 (.40cal ) Going to be switching to the new S&W M&P .40

    The .40 cal is a great round..and you can carry 14+1 (total of 15rounds) in the S&W Sw40ve so alittle less than the 9mm but more than the 45cal. That is why I like the 40...anyway this is a scrapping forum not a shooting forum.

  17. #15
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    Sounds like you're packing quite a bit. I'd hate to be the guy to try and rob you
    There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer


  18. Similar threads on the Scrap Metal Forum

    1. Got a very awesome call
      By XZAV38 in forum Scrap Metal Spots
      Replies: 20
      Last Post: 01-02-2013, 11:13 PM
    2. Got an odd call about something
      By PistoneScrapProcessing in forum General Electronics Recycling
      Replies: 10
      Last Post: 03-01-2012, 10:17 AM
    3. Another call.
      By easyrecycle in forum General - Let's talk business
      Replies: 27
      Last Post: 09-19-2011, 09:57 AM
    4. Got my first real CL call
      By ScrapperNJ26 in forum A Day in the Life of a Scrapper
      Replies: 36
      Last Post: 08-13-2011, 12:05 PM
    5. Second Call for Teardown
      By ocedy in forum A Day in the Life of a Scrapper
      Replies: 7
      Last Post: 06-17-2011, 01:38 PM

Thread Information

Users Browsing this Thread

There are currently 7 users browsing this thread. (0 members and 7 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook