Results 1 to 10 of 10

Proud , embarrassed , foresight - my Legacy

| A Day in the Life of a Scrapper
  1. #1
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts

    Proud , embarrassed , foresight - my Legacy

    OMG is what best describes what I have collected , 2 years ago I gave it a try got a Weissman's container loaded it with 9000 pounds of scrap
    received $80 ok that id never do once more . well I need move it to market as others wont be able to figure my Legacy. I am Proud yet embarrassed & know it was foresight
    that I have this saved this is at best 5% of my collection . I have such work ahead of me . I have every GENRE of scrap I need not List . I was into scrap and I did it WELL

    Attached Images Attached Images     
    http://www.scrapmetalforum.com/members/copper-head.html
    Copper Head and CopperHeadAKA (same person)
    I am back to my skill set from the 80's Painting & all that follows it
    I removed myself from the trash company I worked for as of 2 years ago
    I find scrap non the less

  2. The Following 4 Users say Thank You for This Post by CopperHeadAKA:



  3. #2
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    My 1986 Dodge had been sitting unused for 2 years today finally put a battery to it some ether and she started and ran , but old carb would not continue it keeps getting choked out
    Thursday I will remove to match to a rebuild as the good old Slant Six after 2 years started , like Hey what's up yeah still here .
    I'm gonna make this happen
    Last edited by CopperHeadAKA; 03-18-2021 at 06:55 AM.

  4. The Following User Says Thank You to CopperHeadAKA for This Post:

    kss

  5. #3
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,707
    Thanks
    1,191
    Thanked 2,350 Times in 964 Posts
    Nice... That will keep you busy for a while. How much are basketballs by the pound now?

  6. The Following 3 Users say Thank You for This Post by t00nces2:


  7. #4
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    Quote Originally Posted by t00nces2 View Post
    Nice... That will keep you busy for a while. How much are basketballs by the pound now?
    Would be a retirement dream but no guarantees the body strength in 70's
    I can see I had more power 50's
    60's now & a bit less
    Will I still lift at 70's ? I think i should be able
    I have some crazy memories 30 plus boilers
    fridges in dumpsters
    I was crazy
    I look at what I got & yes it was a type of brilliance for future survival
    values go up and down
    even in the severe down market as a few years ago
    $100 for a trip I could do
    if markets are up just easer for the $100 minimum
    but yeah I had many a day $500 $600 plus
    look I'm humble and simple With a stash of value
    I realize other scrappers here make $$$$ Hats off to you
    you do it .
    I am me and scrapping is all flavors
    I've met many , one I remember he said Get it sell fast
    To this day you still got cord cutters who ever they are
    In the forum not sure any have ever come forward and confess
    Last edited by CopperHeadAKA; 03-18-2021 at 09:37 PM.

  8. #5
    kss's Avatar
    SMF Badges of Honor


    Member since
    May 2019
    Location
    PA
    Posts
    839
    Thanks
    465
    Thanked 715 Times in 403 Posts
    Quote Originally Posted by CopperHeadAKA View Post
    Would be a retirement dream but no guarantees the body strength in 70's
    I can see I had more power 50's
    60's now & a bit less
    Will I still lift at 70's ? I think i should be able
    I have some crazy memories 30 plus boilers
    fridges in dumpsters
    I was crazy
    I look at what I got & yes it was a type of brilliance for future survival
    values go up and down
    even in the severe down market as a few years ago
    $100 for a trip I could do
    if markets are up just easer for the $100 minimum
    but yeah I had many a day $500 $600 plus
    look I'm humble and simple With a stash of value
    I realize other scrappers here make $$$$ Hats off to you
    you do it .
    I am me and scrapping is all flavors
    I've met many , one I remember he said Get it sell fast
    To this day you still got cord cutters who ever they are
    In the forum not sure any have ever come forward and confess

    Any chance any local young people might want to help you with the lifting and hard labor for a few bucks? You can be the "coach" with the scrap knowledge and tell them what to do, pay them a fair wage for a days work, help them out, and still make some profit without ruining your body! Any younger family members kids, grand kids, neices or nefews who need a few bucks could be even better as it keeps the money in the family.... just a thought! good luck
    Last edited by kss; 03-18-2021 at 10:54 PM.

  9. #6
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    My son at sixteen has more under standing then he knows , I told him if you can remember some of the things I have done once you drive there is money here .
    In the end gonna be up to him . My last scrap truck ,should prove to be the best purchase . A simple truck 1986 - 90,000 miles not complex . Just been so busy
    with another career . So scrap took a back seat . But i will still bring home Copper wire and all the dense values .
    Funny when a coworker sees me stop for a battery .
    One story is cool I feel . I was with a worker we were spraying oil sealer paint on all the 2x4 from a SERV PRO job fire restoration project
    well oil paints came in 5 gallon metal cans 20 plus cans with meatal lids .
    Lunch time came & told him I have an idea .
    I put all the empty's in the pickup & took to yard. I think we got like $8
    and got lots of chicken nuggets with drinks for lunch .
    People like money But that moment would never convert him to that side work.
    The mind set of scrappers are unique With skills
    Last edited by CopperHeadAKA; 03-19-2021 at 05:54 AM.

  10. The Following User Says Thank You to CopperHeadAKA for This Post:

    kss

  11. #7
    kss's Avatar
    SMF Badges of Honor


    Member since
    May 2019
    Location
    PA
    Posts
    839
    Thanks
    465
    Thanked 715 Times in 403 Posts
    Quote Originally Posted by CopperHeadAKA View Post
    My son at sixteen has more under standing then he knows , I told him if you can remember some of the things I have done once you drive there is money here .
    In the end gonna be up to him . My last scrap truck ,should prove to be the best purchase . A simple truck 1986 - 90,000 miles not complex . Just been so busy
    with another career . So scrap took a back seat . But i will still bring home Copper wire and all the dense values .
    Funny when a coworker sees me stop for a battery .
    One story is cool I feel . I was with a worker we were spraying oil sealer paint on all the 2x4 from a SERV PRO job fire restoration project
    well oil paints came in 5 gallon metal cans 20 plus cans with meatal lids .
    Lunch time came & told him I have an idea .
    I put all the empty's in the pickup & took to yard. I think we got like $8
    and got lots of chicken nuggets with drinks for lunch .
    People like money But that moment would never convert him to that side work.
    The mind set of scrappers are unique With skills


    Hopefully your son picked up some knowledge from you, and even if he didnt, there is still plenty of time to teach and implant your wisdom on him.


    Once he is driving, when he asks for gas money or money to go to the movies with friends, you can walk him out to the yard, pickup a few copper and brass bits, hand them to him, point him to the scrap yard and send him on his way. He'll learn just from that what stuff gets him more money and begin pickup on on whats worth what... Like if you give him an all copper load and he gets more than brass he'll know copper > brass. Or if you give him a bunch of wire and aluminum he'll know those are less than brass and copper, etc

  12. The Following User Says Thank You to kss for This Post:


  13. #8
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    A lot of people knock those old Dodge trucks, and I don't understand it honestly. I have a 1986 D250 too, and it's a workhorse.



    Yeah, I know- I might be just a bit overloaded. I can't imagine the tongue weight on that wagon- 1044's are a real beast of a machine. But, we had to tow it home, and when that's the largest truck you have, you find out that it's just big enough.
    More than Scrap Value Shipment Tips: http://www.scrapmetalforum.com/scrap...tml#post242349

  14. The Following User Says Thank You to matador for This Post:

    kss

  15. #9
    CopperHeadAKA started this thread.
    CopperHeadAKA's Avatar
    SMF Badges of Honor


    Member since
    Nov 2015
    Location
    PA
    Posts
    269
    Thanks
    78
    Thanked 325 Times in 129 Posts
    Quote Originally Posted by kss View Post
    Hopefully your son picked up some knowledge from you, and even if he didnt, there is still plenty of time to teach and implant your wisdom on him.


    Once he is driving, when he asks for gas money or money to go to the movies with friends, you can walk him out to the yard, pickup a few copper and brass bits, hand them to him, point him to the scrap yard and send him on his way. He'll learn just from that what stuff gets him more money and begin pickup on on whats worth what... Like if you give him an all copper load and he gets more than brass he'll know copper > brass. Or if you give him a bunch of wire and aluminum he'll know those are less than brass and copper, etc
    Thank you , never put Two and Two together
    Your correct it can teach him value that different metals & weight deliver $$ = to learning of life & values .
    Scrapping taught me investing (it was the seed) when I realized all metals had value if not equal value as long as you could deliver
    the weight
    about a year into scrap it occurred to me 5 pounds of copper@ $3.00 was the same as 150 pounds steel @ .10
    and is the same as 1/2 oz silver bullion (at the time )
    From there my mind opened even more to investing in stock crypto & other systems
    and I can truly say when it started ( the real start the SEED )
    I was about 6 years old , A simpler time of life when utility electric work was being done in a neighbor hood
    and a little kid could watch and grab a chunk of copper wire the the workers gave no concern
    I still remember I said what is this ? " Copper " is it valuable ? His Answer was " it's more valuable then You and Me "
    People it is more valuable then you and me
    Here are some statistics
    A percentage of Copper miners get lung cancer
    Accidents I could not find percentages but
    I could find stories of death in copper mine events .
    When we sell to market , do we ever think of the pain & sufferings to the humans put
    to it , including your pain to deliver ?
    Copper is of higher value then us as

    without copper & conductivity where will the world be . Many of us are the soldier's for copper
    it's a Nobile cause .
    Last edited by CopperHeadAKA; 03-20-2021 at 03:56 AM.

  16. #10
    kss's Avatar
    SMF Badges of Honor


    Member since
    May 2019
    Location
    PA
    Posts
    839
    Thanks
    465
    Thanked 715 Times in 403 Posts
    Quote Originally Posted by CopperHeadAKA View Post
    Thank you , never put Two and Two together
    Your correct it can teach him value that different metals & weight deliver $$ = to learning of life & values .
    Scrapping taught me investing (it was the seed) when I realized all metals had value if not equal value as long as you could deliver
    the weight
    about a year into scrap it occurred to me 5 pounds of copper@ $3.00 was the same as 150 pounds steel @ .10
    and is the same as 1/2 oz silver bullion (at the time )
    From there my mind opened even more to investing in stock crypto & other systems
    and I can truly say when it started ( the real start the SEED )
    I was about 6 years old , A simpler time of life when utility electric work was being done in a neighbor hood
    and a little kid could watch and grab a chunk of copper wire the the workers gave no concern
    I still remember I said what is this ? " Copper " is it valuable ? His Answer was " it's more valuable then You and Me "
    People it is more valuable then you and me
    Here are some statics
    A percentage of Copper miners get lung cancer
    Accidents I could not find percentages but
    I could find stories of death in copper mine events .
    When we sell to market , do we ever think of the pain & sufferings of the humans put
    to it including you pains you have to deliver ?
    Copper is of higher value then us as

    without copper & conductivity where will the world be . Many of us are the soldier's for copper
    it's a Nobile cause .
    What an interesting perspective! Never thought about the fact that every lb of stuff we recycle may reduce the amount needing to be mined, which may reduce the amount of people dying in poor countries in order to try and make a living in the mines.... we are heros! we out here saving lives! ... ok maybe thats taking it a little to far, but it's an interesting thought


  17. Similar threads on the Scrap Metal Forum

    1. This thead is a question - Proud to be a Scrapper?
      By snorton1 in forum General - Let's talk business
      Replies: 25
      Last Post: 07-09-2020, 01:41 PM
    2. This thread is a serious one - its our legacy
      By COOLSCRAP in forum Introduce yourself
      Replies: 3
      Last Post: 03-18-2020, 10:37 PM
    3. A proud new owner of an old Xerox 2515 blueprint printer. Now what?
      By thebugguy in forum Scrap Metal Tips and Advice
      Replies: 10
      Last Post: 06-12-2014, 01:06 AM
    4. Just a proud papa moment!
      By BroJer in forum Off Topic Discussions
      Replies: 7
      Last Post: 05-03-2013, 11:28 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook