Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Think I got Cheated!!!!!!!!!!!!!!

| A Day in the Life of a Scrapper
  1. #1
    Big Tex started this thread.
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    63
    Thanked 62 Times in 22 Posts

    Think I got Cheated!!!!!!!!!!!!!!

    I took one of my largest loads in this week! The yard I go to pays by check if it's over the $500.00 amount. I wanted cash, but was concerned I might be getting a check instead.
    Long story short ( only 1680 pounds = $187.00 ) WTH?????????? I take half loads in every 3 to 4 days that pay me more than this. I had a 16' trailer full of: 3 refridges ( packed with scrap metal), 2 washers, 1 commercial frezzer weighing 480 pounds alone, 2 solid iron BBQ smokers, 2 dishwashers , 4 solid steel rack& shelve beams,1 stove, 1 dryer and misc..........metal.
    I trust this yard and have never had to question them before! As I was walking out of their office another patron was being handed his sales ticket. I don't speak spanish, but I understood from his vocals something wasn't right with his pay?
    After the paron left the office I asked the lady working the scales if something was wrong. She said the customer thought she had cheating him. I responded with " Mam, I don't think you cheated me, but this was one of my largest loads , this weight just doesn't seem right to me. She got very defensive and told me I could file a complaint. Needless to say I just walked out and went home.
    I took another load there yesterday. Only 3 refridges = $82.00. When I was cashing in I asked her if anyone else had a complaint the other day when I was there. She said no! I asked her if the scales had every been wrong before. She said only once since she had been working there, and it was because something got stuck in the scale. She also informed me that their scale had just been inspected a few days before i had came in.
    What should I have done if anything? Thanks...........



  2. #2
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    You should have protested your weight that day and asked to see a manager.

  3. The Following User Says Thank You to PartTimeScrapper for This Post:


  4. #3
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Yikes, sounds like the weight was wayyyyy off. I concur with PTS.

  5. The Following User Says Thank You to newattitude for This Post:


  6. #4
    Big Tex started this thread.
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    63
    Thanked 62 Times in 22 Posts
    What happens after a protest to the manager?

  7. #5
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    I would have complained. You got cheated big time brother!

    All of that would have weight way more. My last load that I took in was less than what you described and I had over 2,200 lbs on my trailer.
    George Beale - Founder & President - info@viprecyclingjunkremoval.com
    VIP Recycling Junk Removal LLC - Premier Scrap Metal, Junk, & Electronic Recyclers!
    http://www.viprecyclingjunkremoval.com

  8. The Following User Says Thank You to GeorgeB for This Post:


  9. #6
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by Kris Kringle View Post
    Post the Yards name and Location on here to see if any other members here has Problems with the Yard.
    With all due respect to Kris Kringle's information, be careful with this. If the yard happens to patrol on here, or anyone else who goes to the same one, could possibly report things as slander, and people can get sued for slander accusations.

    I am not saying to not post, as Kris Kringle suggested, just becareful is all.

    Also, Big Tex, what I would also suggest is speaking to the manager. Tell him exactly (even the misc scrap metal) that you brought in and ask him how much he believes it would have weighed.

  10. #7
    Big Tex started this thread.
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    63
    Thanked 62 Times in 22 Posts
    Thanks George! I am kinda hesitant myself to list Names.

  11. #8
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Since when is fact finding or investigating slanderous???
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  12. #9
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    My truck empty weighs 6000 lb plus or minus a couple pounds depending on how much fuel I have, my trailer weighs 1500 lbs empty.

    These weights are consistent no matter who's scale I'm on, write your empty weighs on the backside of your visor.

    The truck and trailer weights are minus driver as I'm always sanding beside the scale operator if there is no outside number device giving weights, I record a copy of my weights to compare notes when it's time to be paid. Keeps the yard honest

  13. The Following User Says Thank You to gustavus for This Post:


  14. #10
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by KZBell View Post
    Since when is fact finding or investigating slanderous???
    I am not saying it is or isnt.

    I am just saying that if you are NOT careful in what you say, then lawyers can easily turn it into slander, and if it is proven that it is indeed slander then there is legal action.

    Again, I am not saying for him not to post a thread and ask people, but I am saying to be careful.

  15. #11
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by gustavus View Post
    My truck empty weighs 6000 lb plus or minus a couple pounds depending on how much fuel I have, my trailer weighs 1500 lbs empty.

    These weights are consistent no matter who's scale I'm on, write your empty weighs on the backside of your visor.

    The truck and trailer weights are minus driver as I'm always sanding beside the scale operator if there is no outside number device giving weights, I record a copy of my weights to compare notes when it's time to be paid. Keeps the yard honest
    I do the same thing kind of. However, some of the stuff I save (wire, copper, brass, small motors) I keep in the bed of my truck, but I do generally know the neighbors anyways.

  16. #12
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    If the guy thinks he's been cheated, not knowing his equipment empty weights and that from the loaded weight crossing the yards scale.

    There is no argument, he was present a should have recorded the facts before crying wolf.

    In my earlier post I have clearly stated how to avoid conflicts with your yard over scale weights.

  17. The Following User Says Thank You to gustavus for This Post:


  18. #13
    Big Tex started this thread.
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    63
    Thanked 62 Times in 22 Posts
    Thanks for the advice Gustavus. I said " Think was cheated ". But your right when it comes down to it. It's my fault for being lazy and not being 100% prepared before selling. I will learn from my own mistake this time!

  19. #14
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Quote Originally Posted by Kris Kringle View Post
    You know I really do see the Dumbing Down of America. Has anyone ever Read what is in the first amendment of the United States? A Question was Asked He Thinks He Got Cheated He Didn't Actually Come Out and Say He was Cheated. I Asked to Name The Yard Where in the Hades Can that Be any Kind Of Slander Or Defamation? If that Was The Better Business Bureau Would of been out of Business Long Ago In My Country You are Allowed to Complain In your Country or Mind It may be Different On what ever Planet Your From.
    Its something in the water that strips out testerone.

  20. #15
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Quote Originally Posted by Big Tex View Post
    Thanks for the advice Gustavus. I said " Think was cheated ". But your right when it comes down to it. It's my fault for being lazy and not being 100% prepared before selling. I will learn from my own mistake this time!
    Welcome Tex we've all run across yards that cheat on weight. Here's one for you, if your yard is using a digital platform scale inside to weigh up copper and brass ask them in how may lb or kg increments it's set for.

    For fun keep a 1 lb certified weight in your truck that you can weigh on their scale to verify the accuracy of the yard scale. You may find that their scale is measuring to the nearest 2 lbs. on the lower end of the scale. In their favor.

    Always be sure that he scale has been tared in before weighing your lot of goods. Keep a close eye on what has and has not already been on the scale, look over the scale mans shoulder when he is writing down your weights.

    Trust no one, we work hard for our money.

  21. #16
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Your yard paid you .11 lb for the steel, does that part seem right? i assume that was a truck scale you crossed,, some of them you can't see from the window when your sitting in the vehicle. If you do want an accurate weight of your equipment, go to a grain elevator around close to you and if they buy and sell grain they will have a Govt. certified scale. Get you a scale ticket you can keep with you. Might only cost $5.00 to weigh it or they may not even charge you. On those truck scales that you cannot see you are taking the word of the operator, if they've had a good/bad day. I think we discussed all this before,,,,
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  22. #17
    Big Tex started this thread.
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    63
    Thanked 62 Times in 22 Posts
    Yes, it was .11 lb. Your right on everything! Thanks for advice

  23. #18
    Big Tex started this thread.
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    63
    Thanked 62 Times in 22 Posts
    Wish I had all your knowledge Gus! Your tips are APPRECIATED Here.... Thanks Again. I am always learning.

  24. #19
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Quote Originally Posted by gustavus View Post
    Its something in the water that strips out testerone.
    Saw a story this morning about how our new economy is being tagged as the "Sheconomy"...Now no disrespect to the women on this forum or in the world for that matter, it actually speaks volumes to how lazy younger men have become.

  25. #20
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Quote Originally Posted by KZBell View Post
    Saw a story this morning about how our new economy is being tagged as the "Sheconomy"...Now no disrespect to the women on this forum or in the world for that matter, it actually speaks volumes to how lazy younger men have become.


    Your comment on how lazy the new generation of men has become has been duly noted by the female gender.

    It's getting pretty sad when a young woman tells me that she would be better off gathering sperm in a hat then impregnating herself with a turkey baster.


  26. Similar threads on the Scrap Metal Forum

    1. don't get cheated on comp heat sinks
      By EcoSafe in forum Scrap Metal Tips and Advice
      Replies: 29
      Last Post: 03-24-2012, 09:29 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook