Metal Recycling Entrepreneur
|
Found 3 crochet clubs, I was letting my son go wild with it on a tear down, he was hitting things , well i tried it on a TV yolk & it's the best hammer type devise i ever used , Lite weight so you can swing it all day, the long handle helps you keep your distance from object and large head cracks the plastic and short well. its better then a hammer.
Metal Recycling Entrepreneur
my ex used to crochet but she used needles not clubs!!
|
There's really no need to be breaking the yoke on a tv to get the copper.
I assume you mean "croquet".
People may laugh at me, but that's ok. I laugh all the way to the bank.
Experienced Scrapper
|
did you mean AFTER you take it off. You don't bust the tube do you ? Please tell me you don't bust the tube.
Crt & Ewaste Specialist
|
Ok im guilty of breaking off the yokes if there is not SS clips holding it there. Anyone got a trick? cause those suckers dont wanna move off there
|
Of all the TVs and monitors I have broken down, I only had one accidental yoke break on me. There are always either ty-wraps, screws and those plastic spinny things that choke down on the yoke or some combination there of. No need to break it at all.
|
|
Usually, I can just twist the copper part by hand till comes off. If there is a clamp holding it, I'll loosen the clamp first.
Experienced Scrapper
|
|
Me too, parrothead...broke one by accident and it scared me half to death !
Metal Recycling Entrepreneur
|
Yah, the yoke assemblies that have epoxy injected into them to hold them in place are a pain. I just removed four today. I took them off the CRTs in pieces. After removing metal banding around the yoke assembly, I gently forced a large flat head screw driver in between the two ferrite pieces and turned the screw driver (like I was removing a screw) to pry the two outer pieces apart. Once I had the outer pieces off, I pried the the rest of the yoke assembly off from the bottom (the edge closest to the screen). I worked my way around slowly, only using just enough pressure/torque. I wear safety glasses, but I think a face shield would be a good idea.Ok im guilty of breaking off the yokes if there is not SS clips holding it there. Anyone got a trick? cause those suckers dont wanna move off there
Metal Recycling Entrepreneur
|
|
Cricket Clubs I meant - sure I get the yoke off , then comes the club no need to bust up a tv but usually the gas comes out .they can be twisted off but you have a big square circuit board at the end , once you Crack off a yolk it gets rid of the shock hazard I found any way , some times i find it more a danger when you take a tv apart slow trying to pry off gently and wiggling cause the longer you take the more time you are near it to get a shock or bust a tube , I seen on Utube a way to ground a tv to defuse it . but for me i have no need as i am not repairing a tv so I cut the red wire pop the end of the yolk till it cracks , & found it is safe
I hold my breath as i do this work for the 30 seconds it takes me.
then i put the back panel back i bring it to a municipal building that takes the tvs . we don't have a good will , salvation army will also take them.
Last edited by Copper Head; 02-20-2012 at 09:41 PM.
Experienced Scrapper
|
Oh cricket club.......Originally Posted by Copper Head
Look at the size of it! That ain't no yoke.
How do you miss the ball? That thing is bigger then my paddle for my canoe!
When the white man discovered this country Indians were running it
no taxes, no debt, women did all the work.
White man thought he could improve on a system like this. - Old Cherokee saying
I did not surrender, they took my horse and made him surrender. - Lone Watie
Experienced Scrapper
|
|
Copper Head on a serious note here, It sounds like your son hangs out in your work shop, is this correct?
Do him and yourself a favor and get a lead test kit! Holding your breath for 30 seconds does what ?
I can picture lead all over everything in your work area. This is a huge hazard to your sons health!
Now back to having fun and cutting up!
Crt & Ewaste Specialist
|
|
Thank you otto but with epoxy injected ones im just gonna keep bashing them. I mean if you do it right there isnt crazy amounts of blow back of the little flakes. hell probably such a bad idea health wise. Im gonna put this into the Darwinism file of things i do for money :-p
|
Yea, that's what Hoss thought also, till that one time and it'll bite you real hard if not kill you.once you Crack off a yolk it gets rid of the shock hazard I found any way , some times i find it more a danger when you take a tv apart slow trying to pry off gently and wiggling cause the longer you take the more time you are near it to get a shock or bust a tube ,
http://www.scrapmetalforum.com/showt...t=tv+grounding
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
Metal Recycling Entrepreneur
|
|
It's not cricket . whats the hammer like club with wooden ball hit through metal hoops
thats the discovery
I never take apart tvs inside always out side, back to the wind and never near kids (i did one & was last one inside thats nasty dust)
I must have more lead in me now then 2 years ago & copper for that matter .
--------------------
The tube holds juice for sure . cut the red wire & never touch tv wile you cut it - just cut fast with insulated lines men . crack yoke & also never touch whilst you do that also. don't breath till complete
Last edited by Copper Head; 02-21-2012 at 08:55 AM.
|
|
Just so you know, the "juice" is also contained in the capacitors on the circuit board. That's why I recommend a ground strap made out a piece of 12-10 ga stranded wire and a pair of clamps off of a junk battery charger. Clamp one end to something metal and the other end to an insulated screwdriver, use the screwdriver to brush across the caps. on the bottom of the board to discharge them then you can stick the end of the driver under the suction cup on the tube. Or you could buy one of these,,The tube holds juice for sure . cut the red wire & never touch tv wile you cut it - just cut fast with insulated lines men . crack yoke & also never touch whilst you do that also. don't breath till complete
Last edited by Mechanic688; 02-21-2012 at 12:46 AM.
Thornton Scrapper
|
Never did i get a zap from tv's or monitors. I got sparks from a wire I cut from a ceiling fan that sat in my garadge for two months. Scared the crap out of me.
Mick is correct. It's croquet.
Yoke in eggs is yolk. Just sayin'.
|
|
What gas?
Experienced Scrapper
|
|
CH, you have disappointed me yet again. The consensus on this forum is to keep the crt's intact so as not to release TOXINS !
You are deliberately doing something AGAIN that we have encouraged others OVER and OVER not to do. Now a noob comes in all confused cause he reads your posts about bashing tv's and mentioning GAS. We have said over and over..there are NO gases inside crt's..it is a vacuum and the hiss you hear is sucking in. I pray that you are not seriously injured someday.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks