Is this tubing brass? I havent seen it personally just the pic and i figure someone here could give me a pretty positive pic id
Ty
Metal Recycling Entrepreneur
|
Is this tubing brass? I havent seen it personally just the pic and i figure someone here could give me a pretty positive pic id
Ty
Metal Recycling Entrepreneur
|
|
Just to be clear not any of the end pieces or fittings but the actual tubing running left
Crt & Ewaste Specialist
|
most the time i find its not unless they came from a really old school theater. ends are for sure
Born to think, destine to succeed.
Metal Recycling Entrepreneur
|
|
Yeah for sure thanks man im going to go look at it **** it..... I guess its like 12 feet, guy says it has to be brass its so heavy, so well see....
|
From here it looks like brass. Just sold one at 7.5 feet. It weighed about 12 lbs. I over paid and sold it on Cl.with a stop light. Got the stop light for free. Sold the 2 items together for 85.00
|
looks brass to me, my father-in-law got a 6 ft section on a job one day, i told him to set it aside because it was worth more than scrap, he took it apart anyway so i had to put it back together, i wound up selling it to a guy building a home bar for $50.
My fortune cookie said:
You discover treasures where others see nothing unusual.
Metal Recycling Entrepreneur
brass hand rail from an old court house church or school
Metal Recycling Entrepreneur
*When you see it in person you can find out in about 2 seconds with a file. But yeah, my bet is yellow brass....
Metal Recycling Entrepreneur
|
|
Yeah for sure thanks guys was going to see if i could wear it down a little bit, hes asking 25 .....2.00 bucks a lb if i cant sell it nonscrap
Metal Recycling Entrepreneur
|
|
Bought it for twenty
|
|
you'll do good on it
Metal Recycling Entrepreneur
|
|
For sure ty
Metal Recycling Entrepreneur
|
It looks like curtain rail. But it isn't
Watch for that curtain rail.
Its actually a long strip of steel thats been 'rolled' into a tube, as they roll it into shape, they also 'roll' onto it a strip of thin brass shim.
Then as the final 'roll' happens, it closes up the gap trapping the edges of the brass shim over the steel tubing.
That gives it a covering of brass.
The 'giveaway' is to look at the end of the tubing & you get to see the two ends of the shim inside the tube, and the rust in the inside, and the magnetic ability....
Looks like brass, bend it over your knee & the seam opens up & the shim moves off the steel.
I don't see much of it, just something I saw once when I was 14.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks