|
Breaking Down Tv's.
I was just wondering who breaks down t.v's and in what case would u break down a tv here are some pro's and cons about breaking down tv's...
Pro's
-Some Copper
-Some Wire
-Low Grade Boards
-Mother Board
-Steel
-More Money Than Before You Broke It Down
Con's
-Alot Of Trash
-Could Be Shocked
-Time Is Money
-Takes Up Space
-Wear And Tear On Tools
It would be nice to get your in-put on if you break down tv's or not
|
If they are free then they are worth doing.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist
NEWBS READ THIS THREAD ABOUT REFINING!!!!
http://www.scrapmetalforum.com/off-t...ning-read.html
|
i break down crts, theres alot of copper in them. Nevermind everthing else in copper goods alone your looking at 3-6 pounds depending on the size of the tube. I can do 3 of them in an hour so thats atleast $40 per hour on the low end. Its worth my time. They dont take up any space if you break them down as they come in, and my recycling company takes all the plastic for free. The tubes and the stripped low grade boards hit the trash.
|
NO MOTHER BOARDS IN TV"S!! I have never gotten 3 lbs. of copper out of a tv, maybe a pound or a pound and a half. There's now way you can get 40.00 out of 3 tv's, if there was I would be braking down tv's all day every day, and your throwing away the circuit boards??
|
|
Throwing away circuit boards, I agree do not throw away those sell them at your scrap yard, If your gonna break one down, I would do it smart
|
Seriously? Three to six pounds of copper per TV? Maybe some of the older ones might have just under 3 pounds, but that's about it.
|
|
Circuit boards and electronics are not classified as hazardous to my landfill first of all. Between the yoke, transformers, degausing cable and wiring i average well over 3 pounds per crt. Are you pulling the transformers and visible copper items off the boards? On tvs the power cord and wiring alone is gonna be a couple pounds. You might also be missing the degaussing cable, they are usually about 1/2 pound.
Experienced Scrapper
|
I break them down. I can completely strip one in about 10-15 minutes, so it's worth it to me. Not to much work if you do it correctly. A drill helps a lot.
Made in China, Recycled in the Republic of Texas!
"When the mind fails, brute force prevails" - CTSSolutions
|
|
yea i was probably a little off, the big ones have around 5 if you pull everything, and im counting transformers as full weight not copper weight. I said copper goods, not pure copper.
Experienced Scrapper
|
|
Are you kidding me? The wiring is no where NEAR a couple of pounds, it's more like 1/2 a pound WITH insulation. What kind of T.V's are you breaking down, I want some!Originally Posted by jghilino
|
|
Maybe I need to check my scale then. Seemed pretty accurate, or so I thought. Or maybe both my scale and the yard I go to are both off...
|
|
I did three tv's today. NO WAY there is $40 worth of materials after they are broken down. Please if we all are doing something wrong or missing something let us know. An average size CRT tv will yield between $3-$5 in materials. There have been many threads on the topic and even a few who delved into buying them. If they were worth more than that there would be buyers on here for them.
|
|
Okay, you got me there. I misread your post. That ain't nothing, though, at least to me. You are talking about what my yard would pay as motors, a miserable 25 cents per pound. #2 copper pays 2.45, so that's a huge difference to me.
|
|
Copper goods is copper bearing materials...still only .20-.25#.
|
To answer your question Devin: no, I no longer break them down. To each their own. Just consider a few facts before you decide whether or not its worth it to you. Break a few down weigh the items, so you can see for your OWN eyes. Next consider the whole weight of the tv; the amount of weight is the true weight of what you're handling.
If you have a 50 lb steel weight that pays you 5$, this is the same as a tv that weighs 50 lbs and nets you 5$ in extracted material.
I won't comment on the amount you make per CRT. There one way to figure that out. Do it yourself and you will see whois honest on this forum and who is full of s*!+.
|
|
read my message before commenting i said i can do 3 in an hour and clear $40 so its worth my time, not 40 for 1, that $40 would be everything like the steel also but even at $30 per hour its still worth it to me. So i am going to keep processing them. I think $10 each is a reasonable figure for the scrap value.
|
Persoanly I have never got more than about $5 to $8 out of a crt.
|
|
jghilino, I started keeping track of what I get per TV in a spreadsheet. Depends on the TV, but I average around 2.00 per unit. Granted, the yards around here pay less than what I've seen others get, but there is no way you can get $10.00 per TV.
|
|
I did read it and I know what I read....not here to argue. To the op, like Russell said break them down weigh what you get out of them and see if it's worth it. Like I said above they are worth it to me as long as they are free.
|
|
Will your yard give you shred for a tv you bring in?
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks