I was asked in an email about cutting up compressors so I thought I would create a thread on doing so. I started with 15 compressors with a total weight of 342 pounds. I ended up with 32.5 pounds of field copper, 2.5 pounds of oil and 306 pounds of what should be #2 prepared if I had a different yard to deal with. I ended up grossing around .33 a pound. It usually costs me .05 a pound to cut them up (.03 for labor and .02 for consumables and power) so my break even point is .28 a pound.
Arkansaw, arnofarrell, Bear, Blue414, brassbuster, BurlyGuys, CFoote, Copper Head, corona, corycouch, DiamondN, erewen, Filthy, ginofrater, greytruck, IdahoScrapper, jdeasterwood, jghilino, kbob, KzScrapper, meatez, Mechanic688, michaelcali, miked, Mowin4cash, NamVet, newattitude, Patriot76, Rollyrogers33, scrapdollar, Scrapette, scrapGAME, skylinejack, streetdoc560, submarinepainter, taterjuice, tedanderson, TheRecycleGuy, TheSheenyMan, travistemple202020, unitsngold, utahscrapper, zito
|
your better at that then i am
I have too much practice at it Cory! It took 15 minutes to cut the tops off, 5 minutes to pull the windings out, 6 minutes to cut the end off the windings and 8 minutes to pull the copper out of the cores for a total of 34 minutes.
Corona, that's why I usually have my grandson do it!
Metal Recycling Entrepreneur
15 compressors in 34 minutes? Haha, I "might" be able to get set up to start on the first one in that time ; )
|
That snow looks cold....I'm out.
Garbage keyboards > spɹɐoqʎǝʞ ʎɐqǝ
Freonjoe I know I have read your old posts with you explaining the blade type in the tablesaw
but I can't remember what type of blade you use? Thanks!
Kbob, I use a 10" cutoff wheel from Lowes. Costs about 4 bucks and lasts about a week cutting 50-60 compressors.
Metal Recycling Entrepreneur
I've been in some places where they have the masonry and the metal blades on the same rack, and it's easy to get them mixed up if you're not watching real close to be sure you're getting the metal kind
Last time I tried to take field wire in, they refused it because "they couldn't be sure what was in the load". Yeah, a 5 gallon bucket and you're too lazy to look.
Anyways I took it back home and been adding to it ever since. What do they pay for field copper? Looks like we use the same yard.
And do you remove the string/plastic?
Thornton Scrapper
|
Awesome post. Very inspirational
Metal Recycling Entrepreneur
|
so what is the total you got for all the scrap? and would you consider melting the aluminum?
Mark, they pay 2.50 on the field copper and they don't mind about the string and plastic. I'm running a barrel in on friday if you want to mix it in with mine.
Happy, I only turn in copper once a month. Also my yard won't take any melted aluminum.
Last edited by freonjoe; 01-14-2013 at 07:03 PM.
|
|
i get #2 for it here 2.75 but i get my bump which usually puts it over 3 depending on the managers mood
Metal Recycling Entrepreneur
haha!Originally Posted by corycouch
What is "field wire" ?
Thanks for the offer Joe, but I don't have a decent pile yet.
|
|
id bet idaho that with joe around its hard for anyone to get a pile....... cept joe
|
Wire found in the field? lolJust kidding. I'd like to know also. That's a new term for me.
Also, freonjoe, Great thread! Great work you're doing , too. Best of luck to ya!!
AMERICAN BORN, AMERICAN BRED! AND I'M PROUD TO BE AN AMERICAN!!!
I have gotten aluminum breakage price for the rotors,think the last time was .17 a pound.
Skyline, they call it field copper because of the varnish on it. Don't know why that makes a difference unless it flashs off when they smelt it.
There are currently 17 users browsing this thread. (0 members and 17 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks