I found a few white, blank ram sticks in a server, they have gold fingers on them.....do I throw them in the ram bucket with the rest or are they considered something different?
New Guy
I found a few white, blank ram sticks in a server, they have gold fingers on them.....do I throw them in the ram bucket with the rest or are they considered something different?
|
If you are scrapping them...ram is ram...for resale, can be different as server ram can be different than regular desktop ram....more complex discussion that I can detail if you need the info.
|
ram blanks are not ram, i think theyre going for about $8 pound on ebay
I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE
|
|
The post said he pulled them from a server...so I am betting he meant there was no sticker or identifyer on them...he would only find a ram "blank" from say a manufacturer...thought I would point that out.
|
|
blank ram sticks are sticks that have no ic chips on them, either they were removed or never came with them, same thing either way and priced the same
as to whether they can be included with gold ram its really up to the buyer, they are worth about 1/2 of gold ram in my opinion
New Guy
sorry guys....I was busy for a bit there....they are complete blanks....no stickers....just white plastic with gold fingers...they were in the ram slots
|
|
yes those are ram blanks /terminators, its the ic chips that make ram so valuable, without the chips the value is greatly reduced
Metal Recycling Entrepreneur
If that's the case, would very old server ram with behemoth chips(on both sides in most cases) be worth more per pound than newer ram with tiny chips ?Originally Posted by jghilino
New Guy
thanks for the replies...one other question....does the small piece of metal have to be peeled off the back of the cpu for best value?....the cpu is out of a pentium 4
Metal Recycling Entrepreneur
check your buyers list, they will likely have prices for both ways
they're easy to pop off of there with a hammer, a chisel, and a backboard
Last edited by Bear; 06-30-2013 at 02:52 PM.
New Guy
I pulled the bif aluminum heatsink....is that little piece of metal still considered a heat sink?
|
I believe those chips are worth less per pound than newer chips (the chips themselves). The reason being is the gold wires are attached to each leg on these chips, so there is more plastic/etc and less legs vs newer chips on ram. Now, the older chips had heavier gold use, so it could be a wash overall.
Metal Recycling Entrepreneur
RDRAM had blanks called terminators.
|
|
I sold My blank ram.. to a buyer.. on this site.. for 15.00 per pound.. But I've had over 300lbs of it.. and He got them refine and he came out good with it... he stated if I got more.. he would be willing to buy them.. why.. he came out ahead.. didn't have to pay for all the weight.. that comes with the ram chips and plus.. it had silver... on the solder places for the chip.. and gold was heavy on them.. So.. I'm happy he happy..
Please Add Us On FaceBook, PC SCRAPPER Sioux Falls SD
also our Prices are listed here http://pcscrapperS.com
PC Scrappers LLC
623 S LYON ST SUUTE 200Sioux Falls, SD 57104
1-605-271-2616
Sledgehammer Enthusiast
|
Found a few of these in a dell pc along with the rambus.
SMF old threads to the rescue once again.
Last edited by NHscrapman; 12-09-2015 at 04:22 PM.
There ain't nothing wrong with an honest days work. Anyone who says otherwise is a fool.- Old Man
|
|
yes, if they have no IC chips and just the gold finger, they are blanks. Many of the older computers needed ram in pairs, so they used those in place of another stick.
PROFIT is made when you BUY/ACQUIRE NOT when you sell
|
Very common in dells.
Google first ask questions later!
Metal Recycling Entrepreneur
|
Yep, Crimms..... I will take the info off the above reference page.
They just fill the gap so the power/information can go thru where the RAMs are.
I got the impression that 1/3rd of the Golds on the contacts and 2/3rds of the Gold is in the chips as wires.
But a CRIMM might have more Gold than normal on its contacts.
quote[Continuity modules Edit
A Rambus continuity RIMM (CRIMM), also known as terminator or dummy
The design of many common Rambus memory controllers dictated that memory modules be installed in sets of two. Any remaining open memory slots must be filled with continuity RIMMs (CRIMMs.) These sticks provide no extra memory, and only served to propagate the signal to termination resistors on the motherboard instead of providing a dead end where signals would reflect. CRIMMs appear physically similar to regular RIMMs, except they lack integrated circuits (and their heat-spreaders).] end quote
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks