Not a e scrapper but ended up with some boards not for sure what I got here, what I'm sure of is they are old and industrial. Any input is greatly appreciated. [IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Rural scrapper
Are these boards worth anything ?
Not a e scrapper but ended up with some boards not for sure what I got here, what I'm sure of is they are old and industrial. Any input is greatly appreciated. [IMG]
[IMG]
[IMG]
Alvord iron and salvage
3rd generation scrapper and dam proud of it
Rural scrapper
Several of these have northern telecom printed on them if that helps any
Thornton Scrapper
|
Yes sir they are. Gold on the ends, and could tell its old from the heat sinks
Rural scrapper
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG]
Rural scrapper
Old but worth anything ?
Metal Recycling Entrepreneur
one and two I would grade at motherboard to finger card grade @ $3.75 per lb. The rest are mid grade(with the heat sinks removed) @ around $2.00 per lb. Contact us by pm if you're interested in selling a quantity of these.
Metal Recycling Entrepreneur
|
I've got about 10 of the boards like the ones in your first picture and 3 more "things" to take apart that were part of the set. Mine came from some type of old equipment. The equipment itself is all aluminum inside and out and has those types of boards. Actually if you looked at one of the really old super computers where the things slide out like drawers.... they're that type. Have no clue if that made sense.
Rural scrapper
I'm Smelling what your stepping it
Rural scrapper
So I need to remove the al heat sinks ? I'm sorry if that's a dumb question, I
As green as they come when it comes to e scrap. What else needs done to get these boards ready ?
|
Is there a screen on what you have that looks like on old radar screen. If it does you may have an oscilloscope. They are worth way more than scrap value sold whole,working or not.Originally Posted by AuntieCake
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist
NEWBS READ THIS THREAD ABOUT REFINING!!!!
http://www.scrapmetalforum.com/off-t...ning-read.html
|
|
Tater a month or so ago I took apart an oscilloscope that had a block of those Motorola transistors on them. They can go for a few bucks each. If you go to search box and type in oscilloscope my post is the second one on there with pics. Take alook at some of the boards I pulled they look a lot like yours. I got telecom grade for them $5.00#. The reason I got that was because the boards were plated with gold. You and auntie should try to peel back a corner of the green sheeting? and see if there is gold underneath. Sorry I don't know how to cut and paste on my iPad.
|
|
I think that pic #3 might have that gold plating under the green. I wouldst check that first. Good luck...I am jealous
Rural scrapper
Thanks to all for your thoughts, got a better idea of what they are worth now.
|
|
WOW I just looked at them on my laptop man they look really nice. Didn't notice before that one says mother board right on it. Glad I could help.
Rural scrapper
Pic # 5 says sentinel mother board on it, the others say northern telecom on em
Metal Recycling Entrepreneur
|
|
Okay this is one of the piece I have except mine is fully intact. There are 4 more pieces bigger than this one I'm guessing they go along with it. Seems it's radio equipment or something. One I already tore down and thought there were 3 left, guess I was wrong.... So maybe whatever it is could be worth a few bucks.
Racal RA-6790/GM HF Receiver for Parts or Repair | eBay
|
|
That guy has it listed for 425 missing parts and not working. I would put one up and see if yours rates better than is. Hell he might buy yours to restore is..lol
Rural scrapper
Don't have the whole thing just bits and pieces of it.
|
|
Tater-did you get a chance to peel the green off a part of it yet?
Metal Recycling Entrepreneur
|
|
Hopefully it will post the pic for me but this is the set of them that I have.
http://s1079.photobucket.com/albums/...t=e3643856.jpg
Last edited by AuntieCake; 09-06-2012 at 08:56 PM.
There are currently 10 users browsing this thread. (0 members and 10 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks