Gaylord of mixed Boards, How much to pay

**Carolinaboy11** · 01-29-2013, 06:06 PM

Hello all, I am a new e-scrapper, been lurking here a while and doing some small deals, but now I have the opportunity to buy about 2 gaylords of mixed cards. Trouble is I am not quite sure how to pay for a group of mixed boards. From the picture below, what do you think is a good price to pay per lb for these bins?

Ok forgive me but I cannot figure out how to upload an image. Am I restricted from uploading because I have not posted enough? I looked at the FAQ but could not add an image. If anyone can help me please do because this thread is no good without the picture. thanks!

**jghilino** · 01-29-2013, 06:10 PM

pci cards with gold fingers on them?

**Carolinaboy11** · 01-29-2013, 06:13 PM

All different boards, mostly low grade but a decent about of others mixed in, You really just need to see the picture. I could email the picture to someone and they could upload it for me maybe?

**ryanw** · 01-29-2013, 06:27 PM

I buy only what I can see. So if you are unable to sort through the boards, I would just assume that the only good boards are the ones that you see, and the rest are low grade (or rocks, who knows...).

**ScrapYaHerd** · 01-29-2013, 08:19 PM

Ya unless there is a weight or you can see things clearly estimate it all to be the lowest grade board you count the most of

**Carolinaboy11** · 01-29-2013, 08:32 PM

Yea I do not want to assume there is more variety that there is, but I can clearly see several types of boards. How long do you have to be a member before you are allowed to post pictures!??

**KzScrapper** · 01-29-2013, 08:35 PM

One post is all it takes. Your first test to be a scrapper is to figure out how to post a pic. Hint...you must use a Photo Hosting Site like Photobucket.

**freonjoe** · 01-29-2013, 08:44 PM

You might want to try this:

http://www.scrapmetalforum.com/smf-s...rum-video.html

**drozenski** · 01-29-2013, 08:47 PM

http://s1326.beta.photobucket.com/us...67c76.jpg.html

Looks more like garbage low grade than anything

**Carolinaboy11** · 01-29-2013, 08:49 PM

OK i figured out how to do it! thanks for the help! Now what price would you pay for gaylords with this mix?

**ResourcefulRecycling** · 01-29-2013, 08:51 PM

.10 per lb if I picked up

**Gravitar** · 01-29-2013, 08:53 PM

Looks like mostly low grade to me. If you are judging from just pics, I would just buy it as low grade because that is what 95% of the boards look like to me (Judging from the pic.) I see 1, maybe 2 motherboards. To me, that is not enough to justify bumping the price up.

**ryanw** · 01-29-2013, 08:55 PM

Originally Posted by drozenski

photoofcards_zpsb0267c76.jpg photo by AustinHammond | Photobucket

Looks more like garbage low grade than anything

I agree. If you have a place locally that buys low grade boards, offer half of what they pay. Not sure how much time you want to spend on this, but you can grab the inductors, transformers, IC's, aluminum, etc off and sell those separately. Not a big money maker though.

**Carolinaboy11** · 01-29-2013, 08:56 PM

OK thanks, I will be able to see them in person before I buy, and yea I see a few mobo mixed in, but was not sure if some of the other green boards were medium grade boards.

**BRASSCATCHER** · 01-29-2013, 08:57 PM

If it was by me 5 cents a pound, and i would drive it right to my buyer for 10 cents a pound. Lots of low grade and it looks like a few of the boards have been partially depopulated.

**Mechanic688** · 01-29-2013, 08:57 PM

Just by what your seeing there isn't a lot of value there,
Little wire,
Some alum. heat sinks,
Few IC chips,
Coils/chokes,
Transformers,
Whole lotta work,

**Carolinaboy11** · 01-29-2013, 08:58 PM

Originally Posted by rawresale

I agree. If you have a place locally that buys low grade boards, offer half of what they pay. Not sure how much time you want to spend on this, but you can grab the inductors, transformers, IC's, aluminum, etc off and sell those separately. Not a big money maker though.

Yea I have a local buyer, and I think this could be a regular customer, maybe 2 or three bins a month.

**Gravitar** · 01-29-2013, 09:01 PM

If you can, try to buy the higher grade ones as low grade because they are mixed in. (in other words, don't touch them or pull them out if you can) When you sell the higher grade ones, they will be the icing on the cake after you sell the low grade.

**Carolinaboy11** · 01-29-2013, 09:05 PM

Yea, Gravitar That is how I will be buying them, all mixed. I know what I can afford to pay if it was separated out, but I am kinda new to grading boards and trying to decide if the green boards are worth more. I think from this picture (assuming it is a true representation of all the material) It appears that about 75-80% are brown low grades and about 20% green.

**freonjoe** · 01-29-2013, 09:08 PM

There are a lot of green boards out there that are low grade.

Gaylord of mixed Boards, How much to pay

Thread Tools

Search Thread

Display

Gaylord of mixed Boards, How much to pay

The Following User Says Thank You to Carolinaboy11 for This Post:

The Following 2 Users say Thank You for This Post by ryanw:

The Following 2 Users say Thank You for This Post by KzScrapper:

The Following 2 Users say Thank You for This Post by freonjoe:

The Following User Says Thank You to Carolinaboy11 for This Post:

The Following 3 Users say Thank You for This Post by ResourcefulRecycling:

The Following 3 Users say Thank You for This Post by Gravitar:

The Following User Says Thank You to ryanw for This Post:

The Following User Says Thank You to BRASSCATCHER for This Post:

The Following User Says Thank You to Mechanic688 for This Post:

The Following User Says Thank You to Carolinaboy11 for This Post:

The Following User Says Thank You to freonjoe for This Post:

Similar threads on the Scrap Metal Forum

How much does a gaylord hold?

What do circuit boards pay?

Seeking info on Gaylord Boxes

Does your yard pay more for steel than mixed?

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions

The Scrap Metal Forum

SMF Recommended Links

SMF on Facebook and Twitter