|
The internal parts of electronic Military equipment, specially radio equipment, is often plated with gold as RF Shielding. If it is gold, this is most likely why it was plated. Thick gold plating looks dull, almost buttery. This could be, very likely in fact, thick gold RF shielding plating.
Scott
At the heart of science is an essential balance between two seemingly contradictory attitudes--an openness to new ideas, no matter how bizarre or counterintuitive they may be, and the most ruthless skeptical scrutiny of all ideas, old and new. This is how deep truths are winnowed from deep nonsense. -- Carl Sagan
|
This is why I like SMF and this thread is a perfect example of people working together, sharing knowledge, wisdom and can still have a good time with a little humor. Thanks everyone!
Iam astounded myself Burt.
You guys are awesome!
Something else to keep an eye out for.
|
This makes me want to take apart the lot of FBCB2 DAGR (military jargon) transceiver boxes I got from govliquidation a while back. I won the whole lot for 40 bucks and never so much as opened the box...
WI ITAD LLC, IT Liquidation Services, we remarket, buy and sell scrap electronics No customer too large or small!
|
Open one , open one please!!!!
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist
NEWBS READ THIS THREAD ABOUT REFINING!!!!
http://www.scrapmetalforum.com/off-t...ning-read.html
|
Don't spread that around, I already have too many people with gold fever - thinking that every computer is
full of gold- sheesh
|
Looks like mikeinreco and armygreywolf both have something they could take apart and post on the breakdown forum. I want to see some pictures.
I have a QSC power amp and a Cisco Catalyst 4500 I was thinking about breaking down and posting on the breakdown forum if I can find time to do it.
Metal Recycling Entrepreneur
|
hi,if it is gold plated , save it.i save all my gold plated items in a 5 gallon bucket,when it gets full I will call a toll refiner,ed. my .02 worth.
|
BUYING ALL COMPUTER SCRAP WORKING OR NOT
CHECK OUT MY BUYERS THREAD http://www.scrapmetalforum.com/scrap...nic-scrap.html
https://getjunk.net/Knox-County-TN-0...Recycling.html
|
|
My trusty screw gun and radio (paid approx .67 each for the radios).....Hope I won't lose
|
|
|
|
|
|
|
|
Well that's what's in an old radio now I have to sell this crap.....LOL
Metal Recycling Entrepreneur
|
I don't think $15 would be a bad investment to have a gold test kit around the place. I don't think the acids go bad and would probably last me a good long time. I'll admit, though, I haven't bought one yet...
|
|
these things are tedious but at least I can work them inside considering it snowed 5 inches yesterday.........I will either try to take one up to a jeweler and get tested (if they don't laugh at me) or just take some good pics and throw up on ebay
|
|
Mike if you take it to be tested take a file and put a notch somewhere on a corner. That is where you want them to put a few drops of test solution. Depending on if it is gold a drop of nitric or hcl should dissolve the base metal and leave the gold alone.
|
On AL it is not typically gold plated just as the others are saying. But I have had a few hundred lbs of radios before and got around .35 a lb, so it could be. Looking at the pictures it does look like gold plating though.
There are currently 12 users browsing this thread. (0 members and 12 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks