which of these are gold connectors?

**sidescrap** · 07-22-2012, 10:12 AM

Hello all, I searched for what is considered gold connectors but wasn't completely certain. If anyone could let me know which of these qualifies, it would be awesome. Thanks.

#6 came from a CRT cord. And I would be cutting off the ribbon if each of those are considered gold connectors.

**BarrenRealms007** · 07-22-2012, 10:24 AM

1,2,7,8,9,10

Sometimes 3 & 4 but rarely.

**PartTimeScrapper** · 07-22-2012, 10:29 AM

I would agree with those numbers.

**sidescrap** · 07-22-2012, 10:37 AM

Excellent, thanks. I'll get cutting.

**rca987** · 07-22-2012, 10:48 AM

Do the jacks that telephone cords get plugged into get considered as a gold connector?

**BarrenRealms007** · 07-22-2012, 11:03 AM

Originally Posted by rca987

Do the jacks that telephone cords get plugged into get considered as a gold connector?

Generally yes, they are a copper base with a layer of tin then gold plating on the pin's.

**Ewasted** · 07-22-2012, 11:12 AM

Barren hit the nail on the head.

**Jeremiah** · 07-22-2012, 02:03 PM

What a great post! Kudos to the orginal poster

**BurlyGuys** · 07-22-2012, 02:53 PM

Can we make this a sticky? REALLY good info!

**BRASSCATCHER** · 07-22-2012, 02:57 PM

Is it safe to say then that the ends from wires such as cat5 and ends that plug in the switches and routers are also gold bearing ends?

**BarrenRealms007** · 07-22-2012, 03:21 PM

Originally Posted by BRASSCATCHER

Is it safe to say then that the ends from wires such as cat5 and ends that plug in the switches and routers are also gold bearing ends?

Yes.

**scrap1025** · 07-22-2012, 10:04 PM

Why would the end of a CAT 5 cable need to be gold bearing when they sell wire for you to make your own cables? Or am I thinking of something else? Are the homemade CAT5 cables different from the store bought ones?

**drozenski** · 07-22-2012, 10:52 PM

The cable is not gold plated the end connector is.

All connectors either store bought or made at home from cable+connectors are all gold plated.

They use gold in connectors because it does not tarnish or corrode. If cable ends corroded then the internet would be a crap shoot at best.

**BarrenRealms007** · 07-22-2012, 10:56 PM

Originally Posted by scrap1025

Why would the end of a CAT 5 cable need to be gold bearing when they sell wire for you to make your own cables? Or am I thinking of something else? Are the homemade CAT5 cables different from the store bought ones?

Now think about your question.

When you attach the wire to the connector what is making contact onto the other connector the cable plugs into?

Is it the wire or is it the connection inside the connector that the wire connects too?

**eesakiwi** · 07-23-2012, 02:55 AM

The wire is connected to the connector by force, it pushes aside the surface layer of copper oxide & physically connects to the copper wire.

Its sorta basicly 'welded' itself to the connector (actually its called wringing Two peices of metal come into such close contact that they start exchanging atoms.

From then on, its the gold surface layer that connects (touches) & the electrons go thru this easy like as there is no oxidation on the surface.

**Gord** · 09-05-2012, 10:39 PM

Great Sticky...not been paying attention to "gold connectors" Finally started to. Make a nice topping to my next box shipment! Didn't realize female ends also were gold

**theelectronrecycler** · 09-05-2012, 10:52 PM

But do you sell the "connector" whole by; the pound, or do you break the ends down for the tiny pins ( sorry, question mark key doesn't seem to be working )

**Mechanic688** · 09-05-2012, 11:04 PM

Originally Posted by Gord

Great Sticky...not been paying attention to "gold connectors" Finally started to. Make a nice topping to my next box shipment! Didn't realize female ends also were gold

Gold always plugs into gold.

But do you sell the "connector" whole by; the pound, or do you break the ends down for the tiny pins

A lot of us sell them by the pound but Joebob and a few others smash the plastic off and pick the pins out of the mess. That's where a ball mill would come in handy.

**BarrenRealms007** · 09-06-2012, 03:51 AM

Originally Posted by Mechanic688

Gold always plugs into gold.

A lot of us sell them by the pound but Joebob and a few others smash the plastic off and pick the pins out of the mess. That's where a ball mill would come in handy.

You need to be careful on running these in a ball mill you have a chance of wearing the gold plating off of the connector pin's.

**Splice** · 09-13-2012, 02:41 AM

I have several hundred CAT 5 jumpers, I need to get to cutting.

which of these are gold connectors?

Thread Tools

Search Thread

Display

which of these are gold connectors?

The Following 24 Users say Thank You for This Post by sidescrap:

The Following 27 Users say Thank You for This Post by BarrenRealms007:

The Following 3 Users say Thank You for This Post by PartTimeScrapper:

The Following 11 Users say Thank You for This Post by BarrenRealms007:

The Following 3 Users say Thank You for This Post by Ewasted:

The Following 5 Users say Thank You for This Post by Jeremiah:

The Following 9 Users say Thank You for This Post by BurlyGuys:

The Following 2 Users say Thank You for This Post by BarrenRealms007:

The Following User Says Thank You to drozenski for This Post:

The Following 2 Users say Thank You for This Post by BarrenRealms007:

The Following User Says Thank You to eesakiwi for This Post:

The Following 4 Users say Thank You for This Post by Mechanic688:

The Following 3 Users say Thank You for This Post by BarrenRealms007:

Similar threads on the Scrap Metal Forum

Gold plated connectors

Ribbon Cable / Connectors

Opinions One These Gold Connectors

brass wire connectors...

wire connectors are aluminum

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions

The Scrap Metal Forum

SMF Recommended Links

SMF on Facebook and Twitter