Results 1 to 20 of 147

escrap questions

| General Electronics Recycling

Hybrid View

GeorgeB escrap questions 08-05-2012, 01:18 PM
Dunemaul 1. photo is to blurred to... 08-05-2012, 01:22 PM
Scrapcrazy My buyer has never given me a... 08-05-2012, 01:52 PM
Bear actually looking back, i... 08-05-2012, 03:02 PM
Bear That drive is probably a 4.3,... 08-05-2012, 03:00 PM
Bear 2 is just a chip on the... 08-05-2012, 03:10 PM
GeorgeB Thanks for your reply. I... 08-05-2012, 04:01 PM
happyscraper George, slot processors are... 08-05-2012, 04:38 PM
Mechanic688 Usually down towards the... 08-05-2012, 06:31 PM
parrothead Slot processors get around... 08-05-2012, 06:22 PM
GeorgeB thanks guys for the... 08-05-2012, 07:08 PM
KzScrapper I suppose not, but when you... 08-06-2012, 05:04 AM
BuckStacyBuck I would think that slot... 08-06-2012, 06:37 AM
GeorgeB money is money lol not... 08-06-2012, 06:56 AM
drozenski If you want to know the size... 08-06-2012, 07:13 AM
GeorgeB thanks for the information. ... 08-06-2012, 10:28 AM
GeorgeB thanks to drozenski's method,... 08-06-2012, 10:35 AM
GeorgeB Ok, I am pretty sure this is... 08-07-2012, 07:49 PM
aurum Bottom is copper, fins are... 08-11-2012, 07:56 PM
BohemianLush Check with your yard and see... 08-22-2012, 08:53 AM
ddelatorre14 Not going to happen. Its... 09-09-2012, 07:46 AM
KzScrapper Isn't the whole thing copper?... 08-07-2012, 08:34 PM
GeorgeB I dont think so. Underneath... 08-07-2012, 09:28 PM
GeorgeB So, I have been curious,... 08-10-2012, 08:22 PM
Mechanic688 I base mine on if I need... 08-10-2012, 08:36 PM
GeorgeB So, in a few days, I will be... 08-11-2012, 10:12 AM
alpha2000 Regarding the first post -... 08-18-2012, 12:12 PM
GeorgeB I have several PCI cards from... 08-19-2012, 09:16 PM
PartTimeScrapper From my ezperience selling... 08-20-2012, 06:34 AM
GeorgeB What are the pins? Only... 08-20-2012, 06:42 AM
PartTimeScrapper LOL really? Go to ebay and... 08-20-2012, 08:44 PM
GeorgeB Well I did that, but that... 08-20-2012, 09:02 PM
Mechanic688 See the pins?... 08-20-2012, 09:47 PM
GeorgeB 2 I have confirmed that 2 of... 08-21-2012, 06:14 PM
Mechanic688 A lot of times you have to... 08-21-2012, 09:32 PM
GeorgeB I did that. I have had it... 08-22-2012, 07:32 AM
GeorgeB Okay ladies and gentlemen, I... 08-22-2012, 07:40 AM
GeorgeB Not sure if I am missing... 08-24-2012, 11:41 AM
GeorgeB Luckily, I managed to get the... 08-24-2012, 01:09 PM
GeorgeB I have 4 pc chips that appear... 08-26-2012, 10:52 AM
GeorgeB Okay, so I tried Google's way... 09-14-2012, 05:37 PM
GeorgeB Okay, so I just learned... 09-14-2012, 06:10 PM
GeorgeB Okay for some reason, I have... 10-19-2012, 05:33 AM
happyscraper First, don't forget to take... 08-08-2012, 06:38 PM
GeorgeB I actually thought of doing... 08-08-2012, 09:16 PM
Dunemaul I like to cash in every week... 08-10-2012, 08:30 PM
Mechanic688 I did that for a short while.... 08-10-2012, 11:31 PM
GeorgeB I was figuring that... 08-11-2012, 06:57 AM
Mechanic688 That depends on your buyer,... 08-11-2012, 10:41 AM
1776Patriotism What are the wires made of?... 08-12-2012, 07:39 PM
Mechanic688 Wow, have you done any of the... 08-12-2012, 07:46 PM
Hypoman Not to mention that there is... 08-13-2012, 03:30 AM
drozenski Exactly. However we live in a... 08-13-2012, 05:01 AM
1776Patriotism Thanks Mechanic, I guess I... 08-13-2012, 03:00 AM
GeorgeB Okay a few more questions. ... 08-16-2012, 04:48 PM
PartTimeScrapper ok ill try to answer your... 08-16-2012, 04:55 PM
GeorgeB Well, I definitely dont want... 08-16-2012, 05:11 PM
PartTimeScrapper Geo when I say test bench its... 08-16-2012, 05:19 PM
GeorgeB Figured so. I have some... 08-16-2012, 05:50 PM
chrisc usually any ribbon cable... 08-20-2012, 06:53 AM
KzScrapper Thanks for the cheap... 08-21-2012, 03:58 AM
GeorgeB Yeah, I was figuring that is... 08-21-2012, 08:18 AM
freonjoe If there is going to be a... 08-22-2012, 07:49 AM
GeorgeB I will be finding out when I... 08-22-2012, 07:59 AM
GeorgeB How much do you all generally... 08-22-2012, 12:10 PM
chrisc i charge 15 each 08-22-2012, 12:23 PM
GeorgeB I have noticed a few places... 08-22-2012, 12:28 PM
drozenski You would be surprised at how... 08-24-2012, 12:38 PM
GeorgeB Well the biggest load I ever... 08-24-2012, 12:42 PM
hobo finds George the land fill here... 08-22-2012, 12:35 PM
chrisc george i do it usual due to... 08-22-2012, 12:39 PM
GeorgeB Unfortunately, no place... 08-22-2012, 12:44 PM
hobo finds Virginia DEQ - Virginia... 08-22-2012, 12:50 PM
GeorgeB Thanks for the link. ... 08-22-2012, 12:55 PM
PartTimeScrapper GEO If your offering COD's I... 08-22-2012, 04:23 PM
GeorgeB PartTimeScrapper, I been... 08-22-2012, 04:41 PM
PartTimeScrapper THen I would take it all and... 08-22-2012, 04:53 PM
GeorgeB I just sent her the proposal... 08-22-2012, 05:07 PM
Mechanic688 If you think the HD's have... 08-24-2012, 12:12 PM
GeorgeB I didnt mean that I wouldnt... 08-24-2012, 12:40 PM
KzScrapper George, it seems your... 08-24-2012, 02:52 PM
GeorgeB Hard to say right now. I... 08-24-2012, 03:00 PM
MvPElectronicRecycling GeorgeB you private messages... 08-24-2012, 05:59 PM
GeorgeB Okay, so apparently now IC... 09-07-2012, 08:29 PM
KzScrapper George...Do you pay attention... 09-08-2012, 05:43 AM
Dunemaul LOL KZ Im seriously wondering... 09-08-2012, 05:50 AM
GeorgeB I always look forward to your... 09-08-2012, 11:20 AM
drozenski Agreed you would think with a... 09-08-2012, 02:22 PM
GeorgeB My apologies for not having... 09-08-2012, 05:04 PM
Dunemaul wierd i have never broken a... 09-08-2012, 12:08 PM
GeorgeB Thanks Dunemaul for trying to... 09-08-2012, 05:08 PM
GeorgeB http://i1083.photobucket.com/a... 09-08-2012, 01:48 PM
BarrenRealms007 On your top picture you can... 09-08-2012, 01:58 PM
KzScrapper You commented recently it was... 09-08-2012, 04:18 PM
GeorgeB I said that I was guilty of... 09-08-2012, 05:06 PM
PartTimeScrapper GEO those chips should be... 09-08-2012, 08:20 PM
GeorgeB Will in that case, I wont... 09-09-2012, 05:52 AM
mikeinreco George no offense but you ask... 09-08-2012, 08:59 PM
GeorgeB Yes, sometimes I do. I am... 09-09-2012, 06:00 AM
scrapperben I think no matter how much is... 09-08-2012, 09:26 PM
PartTimeScrapper LOL buy a couple storage... 09-08-2012, 09:28 PM
Mechanic688 George, those chips are... 09-08-2012, 10:40 PM
GeorgeB I am still learning the... 09-09-2012, 05:56 AM
Mechanic688 I guess I was mistaken... 09-09-2012, 02:42 PM
brucie better way to search forum 09-09-2012, 09:01 AM
GeorgeB Never heard of doing a search... 09-09-2012, 01:27 PM
GeorgeB Okay everyone, have a... 09-14-2012, 12:26 PM
Craasher George the easiest way is to... 09-14-2012, 12:33 PM
GeorgeB I cant do PM's anymore. These... 09-14-2012, 12:57 PM
GeorgeB Also, I have 2 laptops. I... 09-14-2012, 12:58 PM
Craasher I didn't mean I would trade... 09-14-2012, 01:27 PM
GeorgeB No worries. With you being... 09-14-2012, 01:30 PM
Mechanic688 So throw a H.D. in there and... 09-14-2012, 07:11 PM
GeorgeB I plan to throw a hard drive... 09-14-2012, 08:04 PM
GeorgeB Okay, I took out a couple of... 10-17-2012, 03:01 PM
ron22 I am no expert but I would... 10-17-2012, 04:21 PM
chrisc intel 486 are the top payer ... 10-17-2012, 04:42 PM
GeorgeB thanks. what I thought but... 10-17-2012, 05:07 PM
Mechanic688 The 2 ic's are bringing... 10-17-2012, 06:44 PM
GeorgeB thanks mechanic definitely... 10-17-2012, 07:19 PM
KzScrapper If your needing to break them... 10-18-2012, 03:47 AM
GeorgeB does it devalue the board if... 10-18-2012, 05:37 AM
KzScrapper Yes, that is my understanding... 10-18-2012, 12:52 PM
PartTimeScrapper rule of thumb. If its... 10-18-2012, 05:38 AM
GeorgeB The ones I have pictured... 10-18-2012, 02:59 PM
ron22 Great so now you are telling... 10-18-2012, 06:19 AM
Mechanic688 We're not telling you that,... 10-18-2012, 01:34 PM
ron22 I was joking. Yes I remove... 10-18-2012, 05:44 PM
PartTimeScrapper If they dont detect on your... 10-19-2012, 06:16 AM
GeorgeB I dont know..that is why I am... 10-19-2012, 06:44 AM
ron22 MAke sure the jumpers are... 10-19-2012, 09:11 AM
GeorgeB How do I check that? 10-19-2012, 01:00 PM
Mechanic688 Some have a small jumper on... 10-19-2012, 06:42 PM
KzScrapper Maybe you should just save... 10-19-2012, 06:37 AM
ron22 Usaly there is a sticker on... 10-19-2012, 03:44 PM
ron22 Attached is a picture of a... 10-19-2012, 07:22 PM
GeorgeB so how would I switch it? 10-19-2012, 07:27 PM
ron22 The little white thing is a... 10-19-2012, 07:29 PM
GeorgeB I will check tomorrow when I... 10-19-2012, 08:22 PM
PartTimeScrapper If your using a drive dock or... 10-19-2012, 08:32 PM
ron22 I have a usb cable and I had... 10-19-2012, 09:10 PM
PartTimeScrapper I dont remember having that... 10-19-2012, 09:19 PM
  1. #1
    GeorgeB started this thread.
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by PartTimeScrapper View Post
    From my ezperience selling them on ebay you make more money sending them to a buyer. Lets just take ewasted pricing of $4.10 a pound. AFter you figure the average of 15% in fees for final value fees and paypal fees you would have to sell the same 1 pound of pci cards for $4.71 to get the same price. Personaly only things ive seen sell for good enuff money on a regualr basis is pins and gold fingers. ANything else your taking a gamble you dont need to take.
    What are the pins? Only thing I have seen "pins" on is the CPU chips.

    George Beale - Founder & President - info@viprecyclingjunkremoval.com
    VIP Recycling Junk Removal LLC - Premier Scrap Metal, Junk, & Electronic Recyclers!
    http://www.viprecyclingjunkremoval.com

  2. #2
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,392
    Thanks
    993
    Thanked 3,243 Times in 1,327 Posts
    Quote Originally Posted by GeorgeB View Post
    What are the pins? Only thing I have seen "pins" on is the CPU chips.
    LOL really? Go to ebay and type in gold plated pins and that will show you what they are.

  3. #3
    GeorgeB started this thread.
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by PartTimeScrapper View Post
    LOL really? Go to ebay and type in gold plated pins and that will show you what they are.

    Well I did that, but that brought up so many different options, that it was mind boggling lol

    I am sure, that I get it though.

  4. #4
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,571
    Thanks
    11,207
    Thanked 10,684 Times in 4,711 Posts
    Quote Originally Posted by GeorgeB View Post
    Well I did that, but that brought up so many different options, that it was mind boggling lol
    I am sure, that I get it though.
    See the pins?


    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook