Results 1 to 17 of 17

New client, New equipment, Best day ever!

| General Electronics Recycling
  1. #1
    drozenski started this thread.
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Rochester NY
    Posts
    615
    Thanks
    19
    Thanked 526 Times in 238 Posts

    New client, New equipment, Best day ever!

    Well my wife went out today and did a pick up at a new client. She paid $55 for the lot and sent me some pictures while i was at work. I looked at the larger server, looked it up and HP's website said it was a Intel Pentium 3 / Xeon server with unto 4 processors. She only paid $15 for this particular server.

    Not too shabby but could be better. Anyways still a decent score.

    Here is a pic of the server.



    So while i was taking things out. i got to the ram and it had 18 sticks out of a possible 24. Im talking to my wife and am like hey look at all this ram, must be 1/2 a pound. This is great.

    Well i start looking for the processors and say. I cant see where they are they must be under these expansion cards. So i take one out and my explodes with excitement. I pull the other and my mind is blown. I ran over to the table ripped off the heat sinks and found these guys.





    It took me over a year to get 4.. And i get 4 in one day!!!! My wife has all the luck!



    Anyways i need some advice. The company has 100+ computers and a bunch of servers in Texas. If i had to pay for them to ship them here do you think i would still be able to make money off the deal?

    What would it cost for say 8 pallets of equip from Texas to NY?

    http://reclaimtech.com/
    We pay you to recycle!

  2. The Following User Says Thank You to drozenski for This Post:



  3. #2
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Use a LESS FREIGHT company. I cant think of it right now, but there is a post some where, with a link to one that a few buyers on here use.
    George Beale - Founder & President - info@viprecyclingjunkremoval.com
    VIP Recycling Junk Removal LLC - Premier Scrap Metal, Junk, & Electronic Recyclers!
    http://www.viprecyclingjunkremoval.com

  4. #3
    SMF Badges of Honor


    Member since
    May 2012
    Location
    SC - NC State Line
    Posts
    220
    Thanks
    50
    Thanked 120 Times in 76 Posts
    Some of the shipping companies also call it an LTL Load, which means, Less Than A Load. MY Dad, uses LTL Shipping quite a bit in his business. As I understand it, not all freight companies will allow any LTL loads. So, I would call several different freight companies and ask them IF they allow LTL loads.

    When talking to any shipping company you should have several pieces of information on hand and that information is ...

    1. The zip codes (postal codes) from the shipping from location to the shipping to location.
    2. An estimated weight of the load to be shipped.
    3. Amount of time that you wish the load to be shipped. Amount of days/hours from pick up to delivery.

    The shipping company may ask for more specific information, but these few things should give you and the freight company a closer idea of expectations for all parties involved.


    I hope this bit of information helps you out some.

    Be Safe , Work Hard, Happy Scrapping !!!

  5. #4
    SMF Badges of Honor

    Member since
    Nov 2011
    Posts
    65
    Thanks
    40
    Thanked 16 Times in 11 Posts
    droz, Try uship.com, competitors auction against each other to give you the best price...and there is no obligation. If you don't like any bids, you don't have to accept. You can also get alerts on your cell.

  6. #5
    SMF Badges of Honor

    Member since
    Nov 2011
    Posts
    65
    Thanks
    40
    Thanked 16 Times in 11 Posts
    Also, I have used freightquote.com lots of times with success. You get immediate quotes too, no waiting.

  7. #6
    Scrapcrazy's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Oklahoma
    Posts
    321
    Thanks
    153
    Thanked 321 Times in 125 Posts
    AWESOME! Saturday I was kinda in the same boat. I got four in my load Saturday and that's one more than I found my entire time collecting. I know the feel of excitement you experienced! That's the feeling of striking gold! Congrats on your find.
    Sweat is the cologne of success!

  8. #7
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Droz, how about if you give someone in Texas the score and collect a commission for it, that way you don't lose out and the score gets picked up by a responsible scrapper.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  9. The Following 2 Users say Thank You for This Post by Mechanic688:


  10. #8
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    maybe time for a road trip ; )

    Pentium Pro, and P3 Xeon are 2 very different beasts, be sure you know what you're getting. The photo you posted is an old Compaq server
    Last edited by Bear; 08-13-2012 at 11:51 PM.

  11. The Following User Says Thank You to Bear for This Post:


  12. #9
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    I found the link I had saved. International Shipping Company | Worldwide Package Shipping | Nex

    They are great from what I hear.

  13. #10
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    The P3 Xeon CPUs I have are basically simple slot processors, like $10/pound?

  14. #11
    drozenski started this thread.
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Rochester NY
    Posts
    615
    Thanks
    19
    Thanked 526 Times in 238 Posts
    Quote Originally Posted by Mechanic688 View Post
    Droz, how about if you give someone in Texas the score and collect a commission for it, that way you don't lose out and the score gets picked up by a responsible scrapper.
    Already thought of that it's an option i might pursue. The only thing is they expect to get paid for the equip, because that is what i do. So having some one else buy it in Texas might not be an option, of if they dont buy it at the prices i have set it could upset my client and hurt my rep here in NY. So it's currently a last resort.

  15. The Following User Says Thank You to drozenski for This Post:


  16. #12
    Dunemaul's Avatar
    SMF Badges of Honor



    Member since
    Nov 2011
    Location
    East Orlando FL
    Posts
    1,064
    Thanks
    157
    Thanked 560 Times in 301 Posts
    Um Easy would be my first choice for texas buyers. I'm sure you could work everything out quickly. Its his bread and butter.
    Born to think, destine to succeed.

  17. #13
    Gravitar's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Central Texas
    Posts
    1,086
    Thanks
    1,258
    Thanked 1,431 Times in 525 Posts
    You might want to use Yellow or Roadway. They seem to have good prices. Oh, and Id love to have some more e-waste, I just don't have the capacity to handle 8 pallets of it!

  18. #14
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    I use freightquote.com I tryed going directly to YRC they wanted $1000 for a 1000 pound pallet threw freightquote the same pallet was $380.

  19. #15
    chrisc's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ct
    Posts
    251
    Thanks
    201
    Thanked 88 Times in 58 Posts
    8 skids are alot and probably 1500 range to ship my family does it as well as me .if it was me id find a person closer and get finders fee just don't want you to break the bank ..

  20. #16
    LarryB's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Ottawa, Ontario, Canada
    Posts
    221
    Thanks
    896
    Thanked 73 Times in 59 Posts
    Interesting happenings here. Any further updates on this or did it fall through or what? Anyone out there know the outcome of this gold mine type deal?

  21. #17
    drozenski started this thread.
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Rochester NY
    Posts
    615
    Thanks
    19
    Thanked 526 Times in 238 Posts
    I've contacted our contact a few times. First time she got back to me second time i have not heard back. I believe this might be a dead end up am following up after the new year.


  22. Similar threads on the Scrap Metal Forum

    1. what equipment do you use to break down rusty over old equipment?
      By bluemeate in forum Tools and Equipment
      Replies: 6
      Last Post: 09-29-2012, 11:38 AM
    2. Biggest Potential Client Yet
      By LadyScrappers in forum General - Let's talk business
      Replies: 2
      Last Post: 05-16-2012, 04:12 PM
    3. got a good new client excited for my first pick-up
      By mrvictor1 in forum A Day in the Life of a Scrapper
      Replies: 4
      Last Post: 04-10-2012, 09:11 PM
    4. Got a strong client
      By tjlock in forum Scrap Metal Spots
      Replies: 3
      Last Post: 05-29-2011, 10:24 PM
    5. Got a new client.
      By Randy_B_Scrappin in forum Scrap Metal Spots
      Replies: 4
      Last Post: 03-14-2011, 09:06 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook