Results 1 to 18 of 18

So much stuff, so very grateful!

| General Electronics Recycling
  1. #1
    msearl3244 started this thread.
    msearl3244's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Waterloo, Iowa
    Posts
    218
    Thanks
    234
    Thanked 289 Times in 96 Posts

    So much stuff, so very grateful!

    I unloaded a whole truck load (53' dry van) of telecom stuff today. This stuff added to the stuff I already had has filled my shop. I will be working around the clock for a while now. I am going to have to build another building. I have filled 6000 sq ft of floor space and barely have room left for gaylord boxes.

    Folks I will be 100% honest with you right now. I work my rear end off and always try to do the next right thing by other people and my own family. I was grateful to have my Dad and my Nephew help help me unload the truck. As of now I will be processing it myself with some family help here and there. (They come unasked after their own regular jobs to help).

    I have an extensive computer background, but I know very little about telecom stuff. The funny thing is my Dad worked for the telephone company for 40 years and himself installed some of this stuff years ago.

    Some of the boards are new. The 2 pallets that are as wide as the trailer are all new boards.

    I just took a few pictures to give you some idea of what is going on here. I will add more pictures along the way.

    If anyone has any suggestions feel free to post them here or PM me. I generally check here every morning or late at night.

    Most of this stuff is older NORTEL stuff.

    Also if anyone wants certain pictures of certain things feel free to ask.

    1)



    2)



    3)



    4)



    5)



    6)



    7)



    8)



    9)



    10)

    Last edited by msearl3244; 11-04-2012 at 09:08 AM. Reason: spelling correction
    There may a million better places to live than Iowa, but none of them are home!


  2. #2
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    You were asking for suggestions..........My only suggestion is to get to WORK!

    LOL Kewl score man did u pay for stuff or just haul it off?

  3. The Following User Says Thank You to mikeinreco for This Post:


  4. #3
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Louisiana
    Posts
    255
    Thanks
    74
    Thanked 72 Times in 49 Posts
    Nice load. Where did you get the lead on it from?

  5. #4
    msearl3244 started this thread.
    msearl3244's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Waterloo, Iowa
    Posts
    218
    Thanks
    234
    Thanked 289 Times in 96 Posts
    The guy that owns the company replacing the equipment got a hold of me through my local scrap yard and we arranged for me to process it for a 60/40 split of all proceeds with the transportation for both of us coming off the top. His expense to get it to me and my expense to get the boards to Ohio to the buyer from this forum I will be dealing with. I get the 60%. Good deal or not? I guess I don't know yet...LOL

  6. #5
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Yeah u can't hardly lose with that split and taking all expenses off the top is a good idea...........Good deal

  7. #6
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Looks like a great load and deal...Devils Horns right back at ya.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  8. #7
    SMF Badges of Honor


    Member since
    Jun 2012
    Location
    northern nj
    Posts
    296
    Thanks
    110
    Thanked 381 Times in 167 Posts
    I have filled 6000 sq ft of floor space and barely have room left for gaylord boxes.
    nice load

    time to get some quick pallet racks rigged up so you can go verticle with some of the gaylords or skids to maximize what space you have available above the floor

  9. #8
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    You need a nortel buyer up there quick. I guess lots of guys would want your "problem". I suggest speed. You might even work a deal with your yard for things not completely torn down, where you get better than shred, and they complete the teardown with their own crew for the remaining scrap gravy

  10. The Following User Says Thank You to Bear for This Post:


  11. #9
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    WOW.....DROOL.....WOW......awesome stuff you have there and a nice deal to boot on the split. All that work will keep you nice and warm in the coming months. Congrats !!!!
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  12. #10
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    Those big racks look like it came out of a call center of some sort.

  13. #11
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    turn and burn. i would strip off the boards enough to fill a gaylord or two and ship them out. at the same time take the steel in to the local yard. you might lose by sending in a "small" load, but it will free up room in your place to work around and organize yourself. I find i'm less productive when i have a full work area because i cant concentrate on just 1 thing. good luck to you!

  14. #12
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    Yea probably a hundred pounds of gold plated pins / metal there. But its gonna take alot of man hours to get it. good luck with it

  15. #13
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    Sweet score, wish I had the problem of being swamped like that !
    Alvord iron and salvage
    3rd generation scrapper and dam proud of it

  16. #14
    msearl3244 started this thread.
    msearl3244's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Waterloo, Iowa
    Posts
    218
    Thanks
    234
    Thanked 289 Times in 96 Posts
    I have looked into the NORTEL angle a bit, but time is not on my side. It does take a lot of time to research these things. A lot of the boards I have are still in the boxes they came in. But on the other hand a lot of the boxes are date for overnight delivery in 1993 through 1997. These units were still online until recently though. It is a hard call, especially since there is soooo very much that every moment I put off puts me farther behind. I would imagine that even telecom stuff reaches an end of life stage. I do know that the folks who replaced it could have cared less. They were just interested in installing their new equipment and told me so.

  17. #15
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    I'd hope you could find somebody around there who works with it, and already knows what's still worth keeping

  18. #16
    SMF Badges of Honor

    Member since
    Mar 2012
    Location
    Osage,IA
    Posts
    133
    Thanks
    54
    Thanked 65 Times in 40 Posts
    Dang man I would take your problem LOL!
    Nice score gonna be busy I have had a guy knows another guy needing stuff like that removed but havent heard back yet and
    may not till spring and after seeing this maybe a good idea lol.

  19. The Following User Says Thank You to IAscrapper for This Post:


  20. #17
    Destructo_d's Avatar
    SMF Badges of Honor


    Member since
    Sep 2010
    Posts
    185
    Thanks
    35
    Thanked 97 Times in 49 Posts
    I did about 1/3 trailer load 2 winters ago of the EXACT same units... you are going to drool when you see the solid #1 copper bar on the inside of the top boxes.. the boxes that has the whole row of white rocker switchs... Do you have any of the units that have the aluminum block slide in "modules" ? on the inside of those blocks there is 2 layers of circuit boards. there are some gold plated fittings in there and some of the circuit boards have gold circuits and others have boards printed/lamineted to aluminum plates... I dismanteled these for one of the scrap yards I go to... so it was a piece work job... Wish I had more of them, I made good money off those that winter...

  21. The Following 2 Users say Thank You for This Post by Destructo_d:


  22. #18
    msearl3244 started this thread.
    msearl3244's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Waterloo, Iowa
    Posts
    218
    Thanks
    234
    Thanked 289 Times in 96 Posts
    Quote Originally Posted by Destructo_d View Post
    I did about 1/3 trailer load 2 winters ago of the EXACT same units... you are going to drool when you see the solid #1 copper bar on the inside of the top boxes.. the boxes that has the whole row of white rocker switchs... Do you have any of the units that have the aluminum block slide in "modules" ? on the inside of those blocks there is 2 layers of circuit boards. there are some gold plated fittings in there and some of the circuit boards have gold circuits and others have boards printed/lamineted to aluminum plates... I dismanteled these for one of the scrap yards I go to... so it was a piece work job... Wish I had more of them, I made good money off those that winter...

    If you are talking about the radio controller units, I have around 200 of those. I have taken one apart just to see what was in it, but I have soooo much other stuff to do before i start on those. This stuff has thousands of screws. They are really way over built.



  23. Similar threads on the Scrap Metal Forum

    1. Greetings and stuff from Montana~
      By SuSHi in forum Introduce yourself
      Replies: 9
      Last Post: 02-06-2012, 09:47 AM
    2. E- stuff
      By Copper Head in forum A Day in the Life of a Scrapper
      Replies: 10
      Last Post: 12-08-2011, 07:57 AM
    3. What would you pay for this stuff?
      By PartTimeScrapper in forum Scrap Metal Questions and Answers
      Replies: 18
      Last Post: 09-12-2011, 12:14 AM
    4. Stuff just happens
      By parrothead in forum Off Topic Discussions
      Replies: 13
      Last Post: 09-06-2011, 05:42 PM
    5. Name that stuff
      By zooink4 in forum Scrap Metal Questions and Answers
      Replies: 10
      Last Post: 04-14-2011, 03:24 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook