Results 1 to 13 of 13

Surprised my my recent Ewaste load

| General Electronics Recycling
  1. #1
    andrew1990 started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Bourbonnais IL
    Posts
    129
    Thanks
    0
    Thanked 90 Times in 35 Posts

    Surprised my my recent Ewaste load

    Well I won a online surplus auction for 35 computers recently except I had to drive near 700 miles roundtrip. I of course was assuming they should have been small form factor Pentium 4 towers so they could fit in my 4 door saturn with the rear seats gone.

    Well I was shocked when I got there and seen 35 full size towers.......

    Well after closer inspection, they were all Core 2 Duo units except for 5. Well my partner and I started loading them and got 25 in with no room to spare. We told the custodian that we will be back in an hour. So we went to a church parking lot and pulled out our tools. We took apart the 5 Pentium 4 units as well as seven core 2 duo units and brought the cases to a local junkyard(surprised that we got more per ton there than where Im from.).

    Well got the other 10 units in and drove home. The specs on all units are,

    Intel Core 2 Duo E6750 2.66GHz
    1024mb DDR2
    80GB Sata Drives
    DVD Burners



    Checking on ebay and these processors go for $30+ Each! May actually install windows vista due to the COAs being on them and selling them as whole units.



    We paid $205 including Gas to get these units. Figuring we sell the computers for at least $100 Each, thats over $2100 worth of sellables!




  2. #2
    SMF Badges of Honor

    Member since
    Nov 2012
    Location
    NC
    Posts
    213
    Thanks
    99
    Thanked 158 Times in 79 Posts
    $100 each is a reasonable price for those machines. With a fresh install of windows and all drivers installed you should be able to sell them on Craigslist without a problem

  3. #3
    SMF Badges of Honor

    Member since
    Nov 2012
    Location
    NJ
    Posts
    45
    Thanks
    0
    Thanked 13 Times in 6 Posts
    Which auction site do you use?

  4. #4
    andrew1990 started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Bourbonnais IL
    Posts
    129
    Thanks
    0
    Thanked 90 Times in 35 Posts
    Quote Originally Posted by Decycle View Post
    Which auction site do you use?
    I use a GSA Auctions and Govdeals, this was from GSA. Very friendly staff if a question is ever called in to them.

  5. #5
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    very nice thinking on your feet. "observe adapt and overcome".
    "anyone who thinks scrappin is easy money ain't doin it right!"

  6. #6
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    Quote Originally Posted by CarolinaEwaste View Post
    $100 each is a reasonable price for those machines. With a fresh install of windows and all drivers installed you should be able to sell them on Craigslist without a problem
    The problem is your gonna have a very hard time unloading that many c2d machines. Anyone thats waited for a computer is getting them right now due to windows 8 coming out and the holiday season sales , so theres alot of older c2d machines hitting the secondary market right now. Even at the give away price of $50 each i still think your going to have a hard time moving them. Maybe on something like that its better to donate than sell? Or you could always go around to the small local computer shops that sell used pcs to see if any of them are interested.

  7. #7
    andrew1990 started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Bourbonnais IL
    Posts
    129
    Thanks
    0
    Thanked 90 Times in 35 Posts
    Quote Originally Posted by jghilino View Post
    The problem is your gonna have a very hard time unloading that many c2d machines. Anyone thats waited for a computer is getting them right now due to windows 8 coming out and the holiday season sales , so theres alot of older c2d machines hitting the secondary market right now. Even at the give away price of $50 each i still think your going to have a hard time moving them. Maybe on something like that its better to donate than sell? Or you could always go around to the small local computer shops that sell used pcs to see if any of them are interested.
    Exactly, I was thinking of this on the way home. Too many to sell without flooding the market and driving the price down. My plan is to head to a flea market while the weather is still nice and try offloading some there along with my collection of drives and parts. Even if I could sell a few of them and use the time to pass out business cards it would be a success in my book.

    We only need to sell 2 of them for $100 each to recoup our investment. I dont count labor in stuff like this due to the fact that we are bored young adults looking to expand. We got plenty of time, and even more ambition to succeed.

  8. The Following 4 Users say Thank You for This Post by andrew1990:


  9. #8
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    Well if you get stuck with some we have a buyer for good used hard drives here and another one now that buys used dual core cpus at a fair price so you will still do pretty well on them. And your 50 miles from chicago so you do have a large pool of buyers to appeal to.

  10. #9
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Quote Originally Posted by jghilino View Post
    The problem is your gonna have a very hard time unloading that many c2d machines. Anyone thats waited for a computer is getting them right now due to windows 8 coming out and the holiday season sales , so theres alot of older c2d machines hitting the secondary market right now. Even at the give away price of $50 each i still think your going to have a hard time moving them. Maybe on something like that its better to donate than sell? Or you could always go around to the small local computer shops that sell used pcs to see if any of them are interested.
    I agree they are a hard sale anymore.........New computers are so cheap that the used computer market is in the tank.........You can probably sale some on ebay but you have the issue of shipping etc.....The right P4 machines still move for around $50 on Ebay but after fees etc You might clear 40.....Either way its good experience!

  11. #10
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    try C list in other areas. some areas in the midwest south of you were not as effected by the $ problems and I have yet to see a $100 computer there.

  12. #11
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Looks like a great score to me. Dont know if I would have driven 700 miles for it but nice none the less.

  13. #12
    andrew1990 started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Bourbonnais IL
    Posts
    129
    Thanks
    0
    Thanked 90 Times in 35 Posts
    1 down, 20 to go lol

  14. #13
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Central Florida
    Posts
    629
    Thanks
    117
    Thanked 211 Times in 144 Posts
    Strip them of the processors-sell in a lot on ebay, same thing with anything else new and up to date in them.


  15. Similar threads on the Scrap Metal Forum

    1. Replies: 39
      Last Post: 07-17-2016, 08:21 PM
    2. Guy surprised my mom and I driving around yesterday
      By newattitude in forum A Day in the Life of a Scrapper
      Replies: 15
      Last Post: 04-09-2013, 12:49 AM
    3. My ewaste load
      By BRASSCATCHER in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 12-01-2012, 11:07 PM
    4. Nice little ewaste load pickup
      By bpatnoe in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 06-15-2012, 07:09 PM
    5. My ewaste load
      By Igigi in forum General Electronics Recycling
      Replies: 12
      Last Post: 04-25-2012, 11:01 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook