Page 1 of 2 12 LastLast
Results 1 to 20 of 30
  1. #1
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts

    full load of 386 computers lots of pictures and questions

    i got a whole van load of old 386 computers today now i am trying to figure out what to do with them. they were all outside for who knows how long and are very filthy and rusty so i am thinking the will mostly be scrap but i have not seen components like these before



    Old hard drive do i sell them as is or cut the finers off or what? checked ebay dosent look like they are selling



    The processors? i pulled out of the first computer below is a better picture of the silver one i found online. the smaller one i understand is a math processor it is a intel A80387DX-20 what do these get grouped as?



    close up pictures of the processors on the 2nd computer



    Some of the ram. Do these go with the rest of the gold finger ram?


    "enhanced memory expansion" where would this go after the ram is pulled


    expansion card not sure what function. finger card? or something else?


    that is all i have gotten through for now as those we the computers that had no covers i wil grab a few more and take them apart



  2. #2
    InsertUserNameHere's Avatar
    SMF Badges of Honor

    Member since
    Dec 2012
    Location
    Omaha, Nebraska
    Posts
    19
    Thanks
    0
    Thanked 3 Times in 2 Posts
    See if they boot, or at least post. You will make lots more cash that way.

  3. #3
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    those 3 were in pieces i was told the rest should work but i doubt they all will judging by the corosion on some of them i have a few inside i am gonna try to fire them up and hope i can remember back far enough to do something with them

  4. #4
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    just grabbed 3 out of the pile and got this on the screen



    no idea what thats all about but i do find it kinda funnny using a lcd monitor with a 386

  5. #5
    SMF Badges of Honor


    Member since
    Aug 2012
    Location
    US
    Posts
    30
    Thanks
    24
    Thanked 18 Times in 12 Posts
    Quote Originally Posted by Gravitar View Post
    #1: Either sell the hard drive whole or take it apart. You could probably sell the board as a finger card or just toss it with your HD Boards

    Why would you sell a HDD board as a finger card?..

    #2: You may be able to mix this in with your 386 processors. Ebay value perhaps?
    #3: I don't know.
    #4: Yes. Regular ram.
    #5: Either finger card or a backplane would be my guess.
    #6: Probably finger card.
    "It's better to remain silent and be thought a fool than open ones mouth and remove all doubt" **- Mark Twain (attributed)

  6. #6
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    adter doing some home work i gues the 161 and 163 mean the machine is unconfigured likley due to a dead battery. if i made a disk i could probably reconfigure them but looking at a bunch of the floppy drives i dont have much faith in any of them working

  7. #7
    etack's Avatar
    SMF Badges of Honor
    Buying Tantalum capacitors

    Member since
    Oct 2012
    Location
    United States ohio
    Posts
    503
    Thanks
    443
    Thanked 635 Times in 282 Posts
    I do love all those Tantalum cap and shiny gold lids.

    Great score

    Eric
    I buy Tantalum Capacitors and offer other services. Check out my thread for more info.

    http://www.scrapmetalforum.com/scrap...-cap-more.html

    http://recycletantalumcapacitors.com/

  8. #8
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    now what to do with everything, i am still thinking scrap unless i could sell them whole rather quick, i think there is about 50 still in the van, dont know if i could ever sell that many whole as is without doing much testing

  9. #9
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    You might sell them to another scrapper from here, but I wouldn't trust a 'puter that's been outside for any length of time.
    I'd be breaking them down.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  10. #10
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    they were definatly outside for a little longer then the old boy i got them from thought they were. i wish i could get a good picture inside of one of the floppy drives. looks like parts i take off of cars that have been exposed to way to much road salt. i decided no more testing for the night the last one i plugged in started smoking from the power supply when i turned it on. i think if i try it with any more it will be outside with the hose handy

  11. The Following User Says Thank You to joef1812 for This Post:


  12. #11
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    Youngstown, OH
    Posts
    606
    Thanks
    6
    Thanked 282 Times in 193 Posts
    Were all of them IBM PS/2 machines? The cards are MCA (microchannel), the HD shown uses a proprietary edge connector IBM used for early PS/2 machines. The 161 and 163 errors are from a dead configuration battery, nothing special there (hope they didn't explode because the machines were left to the elements).

  13. #12
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    as far as i could tell they are all IBM model 50 and model 70 PS/2 computers but it was dark and about 10 degrees so i didnt check all of them

  14. #13
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    so does anyone know about the A80387DX-20 chips?

  15. #14
    happyisthealero's Avatar
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    michigan
    Posts
    529
    Thanks
    439
    Thanked 114 Times in 83 Posts
    can you at least show me the whole van load so I can hate you more?

    Good score, I had a guy sell me a 66mhz 486 2 weeks ago for $5 Im glad he didn't know what it was lol

  16. The Following User Says Thank You to happyisthealero for This Post:


  17. #15
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    Iwill take pictures as soon as I unload tonight I got home late and it was near 0 degrees so they are still loaded

  18. The Following User Says Thank You to joef1812 for This Post:


  19. #16
    kane333's Avatar
    SMF Badges of Honor


    Member since
    Aug 2012
    Location
    Kearneysville, WV
    Posts
    120
    Thanks
    70
    Thanked 115 Times in 47 Posts
    Quote Originally Posted by joef1812 View Post
    so does anyone know about the A80387DX-20 chips?
    The 80387 chips were Math Coprocessors. The DX version complemented the 80386DX CPU's which had 32Bit Bus whereas the SX Versions complemented the cheaper and slower 80386SX CPU's which ran on a 16Bit Bus.

  20. The Following 2 Users say Thank You for This Post by kane333:


  21. #17
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Quote Originally Posted by joef1812 View Post
    they were definatly outside for a little longer then the old boy i got them from thought they were. i wish i could get a good picture inside of one of the floppy drives. looks like parts i take off of cars that have been exposed to way to much road salt. i decided no more testing for the night the last one i plugged in started smoking from the power supply when i turned it on. i think if i try it with any more it will be outside with the hose handy
    Please do not try to put out an electrical fire with a hose. Nice score by the way.
    "64K should be enough for anybody." - Bill Gates 1981
    http://www.treasurecoastelectronicrecycling.com/

  22. The Following 2 Users say Thank You for This Post by parrothead:


  23. #18
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    I should know better about the electrical fire duh guess I wasn't thinking thanks for reminding me

  24. #19
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    when i've had em burn out it's usually just been the power supply blows a puff of smoke and that was it

  25. #20
    joef1812 started this thread.
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Lee County, Iowa
    Posts
    149
    Thanks
    12
    Thanked 77 Times in 39 Posts
    even a puff of smoke is enough to concern me especially since i am working inside as it is so cold now. after the one smoking and having to open up some tonight with a pry bar due to rust and corrosion i dont think i will be testing any more out unless they look to be in very good shape


  26. Similar threads on the Scrap Metal Forum

    1. What my load of computers look like,,,
      By Mechanic688 in forum Misc. Metal Recycling
      Replies: 20
      Last Post: 01-25-2013, 01:29 PM
    2. First Load of Computers
      By Sabby in forum General Electronics Recycling
      Replies: 8
      Last Post: 01-20-2013, 09:30 PM
    3. Full truck load
      By CAPTSCRAPER in forum Scrap Metal Videos
      Replies: 2
      Last Post: 11-01-2012, 11:37 AM
    4. New York | For Sale - Lot of Commodore, Texas Instrument computers and components (lots of pics)
      By thirsty in forum Scrappers Classifieds
      Replies: 13
      Last Post: 10-17-2012, 12:38 AM
    5. When Selling Cell Phones on Ebay. Multi Lots or Specific Lots?
      By Jeremiah in forum General Electronics Recycling
      Replies: 2
      Last Post: 08-23-2012, 09:02 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook