Help Id and price this board

[Pike1990]

I have about 100 pounds of these boards. I think they are telecom boards but I am not sure of the value.
<a href="http://s208.photobucket.com/user/pike1990/media/Scrap/image_zps569d1690.jpg.html" target="_blank"><img src="http://i208.photobucket.com/albums/bb127/pike1990/Scrap/image_zps569d1690.jpg" border="0" alt="Telecom photo image_zps569d1690.jpg"/></a>

[Pike1990]

[Pike1990]

Second board is a t1 board.

[Pike1990]

Third board.

[toula]

Not sure of the first one but the last 2 are telecom.

[Bear]

I can't tell you about your boards, but, funny thing is, I can tell you something about your photos. That first one, that you're unsure of, you have photographed it from the top, and one thing I do know about boards and their photos, is that so many times, viewing the connectors themselves is more important than seeing the board

[Pike1990]

Bear, you are correct. Here is a side pict of the first board.

[Pike1990]

I see that some buyers will pay 4-6 bucks on sort. I was wondering how these compare in the sort. Thanks for any help.

[happyisthealero]

I recently had some of those boards you have above in the second pic, I break off the gold strips and they down graded me to mid grade! Should I be upset?

[zito]

I recently had some of those boards you have above in the second pic, I break off the gold strips and they down graded me to mid grade! Should I be upset?

Just going by what I've seen others post on the various forums, if by mid-grade you mean somewhere around the $1 per lb. mark, I'd be pretty choked, yeah. If you mean mid-grade telecom at $4-5 per lb., then no.

[happyisthealero]

Yes mid-grade as in what you said first! So it looks like I won't be doing business with them again with network boards, just take my plastic and other garbage to them, lol. I will be talking to the owner of the company sometime this week to settle my grievances, or what I called it as being "concerned"

[Mechanic688]

I recently had some of those boards you have above in the second pic, I break off the gold strips and they down graded me to mid grade! Should I be upset?

If your talking about breaking off the gold finger strip, then yes your downgrading it.

[zito]

If your talking about breaking off the gold finger strip, then yes your downgrading it.

Sure you're downgrading the board some, but from telecom grade to a buck, over a finger strip that looks to be about 2" long? On a pretty heavily populated board? That ain't reasonable. Even finger cards only get downgraded around $1-$1.50 or so, and on those boards that's losing a much bigger chunk of the value.

[happyscraper]

If I was to buy those boards and I saw that the fingers where cut off then I would think some other things might have been taken off as well. I would down grade to low grade and I wouldn't care if you took your business some place else. Because I would have told you up front that you do not remove anything off higher grade boards.

[Phantoms001]

Yes mid-grade as in what you said first! So it looks like I won't be doing business with them again with network boards, just take my plastic and other garbage to them, lol. I will be talking to the owner of the company sometime this week to settle my grievances, or what I called it as being "concerned"

I seriously doubt the buyers I use on this forum would do that "because" you cut off a little finger. I'm a little surprised that someone would even notice that the finger was cut. Because the boards are sorted by a human mistakes can be made. I've had mistakes made on boxes I've sent to buyers, but they were quickly fixed. Use a highly recommended buyer and usually you won't have this kind of problem. But as others posted (this is a reoccurring theme), I'm not sure why you want to downgrade a board. You certainly would have made more with the weight of a higher grade vs. the small value of the fingers.

You are...

1. Reinventing the wheel

2. Learning the hard way

[Pike1990]

Do you think $3.50 a pound for the first board and $6 per pound for the last two?

[Pike1990]

I am just not sure what a $6 high grade board looks like

[jghilino]

Do you think $3.50 a pound for the first board and $6 per pound for the last two?

nope alot lower

midgrade on the first, rest would be paid as lowgrade telecom/fingerboard/green motherboard which all payout about the same

[happyisthealero]

I don't think I will be dealing with them before long. Especially if they will be treating me like this, I will be talking with the owner tomorrow when I find time.