Results 1 to 20 of 82

Ewaste?? Was it the next big thing?

| General Electronics Recycling

Threaded View

mikeinreco Ewaste?? Was it the next big... 10-17-2014, 11:27 AM
phred59 when you see the precious... 10-17-2014, 12:01 PM
BRASSCATCHER Ewaste has lost its steam due... 10-17-2014, 12:05 PM
MattyNoNeck Well, I’m new to scrapping in... 10-17-2014, 12:11 PM
BRASSCATCHER If your sitting on ewaste i... 10-17-2014, 12:11 PM
MattyNoNeck I'll sit on "the good stuff"... 10-17-2014, 12:16 PM
phred59 oh no worries my man i know... 10-17-2014, 12:58 PM
mikeinreco Agreed......Trust me I have... 10-17-2014, 01:03 PM
phred59 I'm never really looking for... 10-17-2014, 01:18 PM
Freakbilly I have been cruising the... 11-16-2014, 06:29 PM
Sirscrapalot Count me out of the club that... 10-17-2014, 01:02 PM
mikeinreco SIR SCRAPS I think your... 10-17-2014, 01:10 PM
miked Interesting topic. I'm able... 10-17-2014, 01:26 PM
MattyNoNeck Ok, dumb question. Will... 10-17-2014, 02:44 PM
MattInTheHat depends on your area and I... 10-17-2014, 03:07 PM
Scrappah It's hard for me to imagine... 10-17-2014, 03:46 PM
spinroch I only ship out circuit... 10-17-2014, 04:32 PM
Phantoms001 Its getting tougher and... 10-17-2014, 06:36 PM
armygreywolf I've been after commercial... 10-17-2014, 07:27 PM
mrsamsonite As for the next thing in... 10-17-2014, 09:48 PM
matador I have always favored retail... 10-17-2014, 11:04 PM
bigburtchino I think (just my $.02 at it's... 10-18-2014, 12:01 AM
Mmarro89 I believe it was sean at... 10-18-2014, 08:07 AM
mikeinreco SO everyone thinks this a... 10-18-2014, 11:49 AM
redcrossnj I hear ya mike . scrap isnt... 10-18-2014, 01:04 PM
mikeinreco GOOD IDEA!!!! Its still a... 10-18-2014, 04:31 PM
AuburnEwaste Ewaste?? Was it the next big... 10-18-2014, 01:13 PM
mikeinreco I guess in a bigger area I... 10-18-2014, 02:11 PM
bigburtchino I completely agree in... 10-18-2014, 02:13 PM
bigburtchino Mike seriously free? I don't... 10-18-2014, 02:16 PM
mikeinreco I acknowledged it wasn't Free... 10-18-2014, 02:25 PM
bigburtchino I get you, that would help... 10-18-2014, 02:51 PM
beardo Ewaste?? Was it the next big... 10-18-2014, 03:33 PM
webuyselltradestuff Ewaste in some form will... 10-18-2014, 06:50 PM
mrsamsonite Like others have mentioned I... 10-18-2014, 08:58 PM
matador Scrapping a computer out is... 10-18-2014, 11:22 PM
pjost I admittatly don't know... 10-19-2014, 08:15 AM
mikeinreco thank you dr.post!!!!!!....... 10-19-2014, 09:53 AM
webuyselltradestuff actually PM is directly... 10-19-2014, 10:38 AM
armygreywolf I look at it like this, I... 10-19-2014, 12:13 PM
phred59 I don't want a silver rally... 10-22-2014, 01:01 PM
armygreywolf I feel you phred I've been on... 10-23-2014, 09:15 AM
Mmarro89 I'm not sure where you got an... 10-23-2014, 05:43 PM
Scrappah I dunno .... it's up in the... 10-19-2014, 12:31 PM
redcrossnj Ebay is more appealing to me.... 10-19-2014, 02:26 PM
travistemple202020 ewaste has only seen the... 10-19-2014, 07:45 PM
bigburtchino I'm certainly no financial... 10-19-2014, 10:31 PM
Scrappah There's no doubt in my mind... 10-20-2014, 11:57 AM
logansryche An interesting read and from... 10-20-2014, 11:56 AM
mrsamsonite Just thought that Id post... 10-22-2014, 09:29 AM
lousypirate hopefully it picks back up... 10-23-2014, 05:18 AM
mrsamsonite Next big thing? 10-30-2014, 02:06 PM
Mmarro89 I have heard mixed answers... 10-30-2014, 04:14 PM
MattInTheHat A while ago, there was... 10-30-2014, 05:21 PM
Scrappah There's a possibility we... 10-30-2014, 04:55 PM
Jonniebrass They will find away to tax... 10-31-2014, 04:52 AM
miked There has been a lot of money... 10-31-2014, 05:17 AM
armygreywolf Electromagnetic radiation is... 10-31-2014, 10:52 AM
Mmarro89 The info regarding the i... 11-03-2014, 03:47 AM
bigburtchino Mmarro89 all I can say is... 11-03-2014, 11:06 AM
miked I agree with that statement... 11-03-2014, 01:45 PM
bigburtchino "butt pillaged" has me... 11-03-2014, 02:58 PM
Mmarro89 Haha thank you gentleman,... 11-06-2014, 03:38 PM
unknownk Motherboards will always have... 10-31-2014, 05:34 PM
armygreywolf Around here the "desktop" is... 11-01-2014, 12:12 AM
mikeinreco AS prices drop lower I am at... 11-01-2014, 11:08 AM
matador I'd look into the Part Time... 11-02-2014, 10:51 PM
mikeinreco Never had much luck on ebay... 11-03-2014, 03:36 PM
matador I'd list the processor model,... 11-03-2014, 03:48 PM
magnet I used Geib Refining Corp in... 11-03-2014, 10:57 AM
mikeinreco the 380 is several years... 11-03-2014, 04:02 PM
miked I would put the mobo model... 11-03-2014, 05:10 PM
matador If you have multiples, I'd do... 11-03-2014, 09:49 PM
AuburnEwaste Ewaste?? Was it the next big... 11-04-2014, 05:24 AM
matador I'd be inclined to offer the... 11-04-2014, 09:45 AM
mikeinreco Well I sold one Mboard so... 11-06-2014, 03:56 PM
redcrossnj Ebays been kicking scraps ass... 11-06-2014, 04:00 PM
mikeinreco I hate to bring this up but... 11-06-2014, 04:04 PM
redcrossnj I got ya mike . a truck load... 11-06-2014, 04:10 PM
mikeinreco Yes I will have to say with... 11-06-2014, 04:13 PM
bigburtchino Come writers and critics who... 11-06-2014, 07:33 PM
mikeinreco Usually what I pay double... 11-17-2014, 10:21 PM
  1. #7
    phred59's Avatar
    SMF Badges of Honor

    Member since
    Jul 2014
    Location
    Northwest AR
    Posts
    276
    Thanks
    288
    Thanked 504 Times in 200 Posts
    Quote Originally Posted by BRASSCATCHER View Post
    If your sitting on ewaste i hope its material that you paid very little for or nothing at all. Guessing on when the market will go up is a losing bet. If you get it and can sell at a profit always take the money. I think the days of 1800 an ounce and 3.50 for small socket mobos are long gone. If you can process it or know someone who can its an investment for the future.
    oh no worries my man i know what im doing. i buy and sell still the same, i just hang on to the stuff that i can store easily and have no money tied up into.

    I'll buy a pallet of towers, usually P4 XP, that's what are being replaced the most frequently right now. Optiplex's everywhere. and I'll pick them up for about $3 ea. I go through them all, decide which ones i am going to refurb and sell on CL. I might have to even buy a part or two, but I'll wind up with about 10 functional machines out of 20-25 of them. I sell off the functional towers usually around $70-$80 ea. Usually sell 2-3/week.



    I take all of the ferrous scrap to the yard immediately, which 10-15 optiplex shells usually wins up yielding about $9-$12. I don't even count that as anything. I put it in the gas tank on the way back from that 2 mile drive. And as soon as I sell 1 tower on CL, I have made my money back. I make profit on these deals usually before I even touch the scrap portion. So anything I decide to sit on, has been paid for for weeks. I have another 3 scrappers in the area that brings me any PCs or Laptops that they find and I pay them by the lb. - double what the yard gives for them (local yard gives shred price for PCs .09/lb. so I pay them $.18 and everyone wins). These I process seperately, I hoard the CPU HD boards, CD boards and RAM, and ship off the MB and Fingercards to forum buyers. Just tried out my 4th one this past week. This way that cashflow doesn't lose steam and stays with the current market. If I pay out $50 i usually have about 12 desktops and a couple laptops, and assuming none of them are refurb worthy and i break them all down, within a week I have a check back for about $30-40 for the MB & FC, scrapped the shells, power supplies, copper and ali to recoup the rest of my investment, and and I kept all of the parts I wanted to keep. Total amount risked in hoarding these parts? $0

  2. The Following 13 Users say Thank You for This Post by phred59:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook