Results 1 to 20 of 82

Ewaste?? Was it the next big thing?

| General Electronics Recycling

Threaded View

mikeinreco Ewaste?? Was it the next big... 10-17-2014, 11:27 AM
phred59 when you see the precious... 10-17-2014, 12:01 PM
BRASSCATCHER Ewaste has lost its steam due... 10-17-2014, 12:05 PM
MattyNoNeck Well, I’m new to scrapping in... 10-17-2014, 12:11 PM
BRASSCATCHER If your sitting on ewaste i... 10-17-2014, 12:11 PM
MattyNoNeck I'll sit on "the good stuff"... 10-17-2014, 12:16 PM
phred59 oh no worries my man i know... 10-17-2014, 12:58 PM
mikeinreco Agreed......Trust me I have... 10-17-2014, 01:03 PM
phred59 I'm never really looking for... 10-17-2014, 01:18 PM
Freakbilly I have been cruising the... 11-16-2014, 06:29 PM
Sirscrapalot Count me out of the club that... 10-17-2014, 01:02 PM
mikeinreco SIR SCRAPS I think your... 10-17-2014, 01:10 PM
miked Interesting topic. I'm able... 10-17-2014, 01:26 PM
MattyNoNeck Ok, dumb question. Will... 10-17-2014, 02:44 PM
MattInTheHat depends on your area and I... 10-17-2014, 03:07 PM
Scrappah It's hard for me to imagine... 10-17-2014, 03:46 PM
spinroch I only ship out circuit... 10-17-2014, 04:32 PM
Phantoms001 Its getting tougher and... 10-17-2014, 06:36 PM
armygreywolf I've been after commercial... 10-17-2014, 07:27 PM
mrsamsonite As for the next thing in... 10-17-2014, 09:48 PM
matador I have always favored retail... 10-17-2014, 11:04 PM
bigburtchino I think (just my $.02 at it's... 10-18-2014, 12:01 AM
Mmarro89 I believe it was sean at... 10-18-2014, 08:07 AM
mikeinreco SO everyone thinks this a... 10-18-2014, 11:49 AM
redcrossnj I hear ya mike . scrap isnt... 10-18-2014, 01:04 PM
mikeinreco GOOD IDEA!!!! Its still a... 10-18-2014, 04:31 PM
AuburnEwaste Ewaste?? Was it the next big... 10-18-2014, 01:13 PM
mikeinreco I guess in a bigger area I... 10-18-2014, 02:11 PM
bigburtchino I completely agree in... 10-18-2014, 02:13 PM
bigburtchino Mike seriously free? I don't... 10-18-2014, 02:16 PM
mikeinreco I acknowledged it wasn't Free... 10-18-2014, 02:25 PM
bigburtchino I get you, that would help... 10-18-2014, 02:51 PM
beardo Ewaste?? Was it the next big... 10-18-2014, 03:33 PM
webuyselltradestuff Ewaste in some form will... 10-18-2014, 06:50 PM
mrsamsonite Like others have mentioned I... 10-18-2014, 08:58 PM
matador Scrapping a computer out is... 10-18-2014, 11:22 PM
pjost I admittatly don't know... 10-19-2014, 08:15 AM
mikeinreco thank you dr.post!!!!!!....... 10-19-2014, 09:53 AM
webuyselltradestuff actually PM is directly... 10-19-2014, 10:38 AM
armygreywolf I look at it like this, I... 10-19-2014, 12:13 PM
phred59 I don't want a silver rally... 10-22-2014, 01:01 PM
armygreywolf I feel you phred I've been on... 10-23-2014, 09:15 AM
Mmarro89 I'm not sure where you got an... 10-23-2014, 05:43 PM
Scrappah I dunno .... it's up in the... 10-19-2014, 12:31 PM
redcrossnj Ebay is more appealing to me.... 10-19-2014, 02:26 PM
travistemple202020 ewaste has only seen the... 10-19-2014, 07:45 PM
bigburtchino I'm certainly no financial... 10-19-2014, 10:31 PM
Scrappah There's no doubt in my mind... 10-20-2014, 11:57 AM
logansryche An interesting read and from... 10-20-2014, 11:56 AM
mrsamsonite Just thought that Id post... 10-22-2014, 09:29 AM
lousypirate hopefully it picks back up... 10-23-2014, 05:18 AM
mrsamsonite Next big thing? 10-30-2014, 02:06 PM
Mmarro89 I have heard mixed answers... 10-30-2014, 04:14 PM
MattInTheHat A while ago, there was... 10-30-2014, 05:21 PM
Scrappah There's a possibility we... 10-30-2014, 04:55 PM
Jonniebrass They will find away to tax... 10-31-2014, 04:52 AM
miked There has been a lot of money... 10-31-2014, 05:17 AM
armygreywolf Electromagnetic radiation is... 10-31-2014, 10:52 AM
Mmarro89 The info regarding the i... 11-03-2014, 03:47 AM
bigburtchino Mmarro89 all I can say is... 11-03-2014, 11:06 AM
miked I agree with that statement... 11-03-2014, 01:45 PM
bigburtchino "butt pillaged" has me... 11-03-2014, 02:58 PM
Mmarro89 Haha thank you gentleman,... 11-06-2014, 03:38 PM
unknownk Motherboards will always have... 10-31-2014, 05:34 PM
armygreywolf Around here the "desktop" is... 11-01-2014, 12:12 AM
mikeinreco AS prices drop lower I am at... 11-01-2014, 11:08 AM
matador I'd look into the Part Time... 11-02-2014, 10:51 PM
mikeinreco Never had much luck on ebay... 11-03-2014, 03:36 PM
matador I'd list the processor model,... 11-03-2014, 03:48 PM
magnet I used Geib Refining Corp in... 11-03-2014, 10:57 AM
mikeinreco the 380 is several years... 11-03-2014, 04:02 PM
miked I would put the mobo model... 11-03-2014, 05:10 PM
matador If you have multiples, I'd do... 11-03-2014, 09:49 PM
AuburnEwaste Ewaste?? Was it the next big... 11-04-2014, 05:24 AM
matador I'd be inclined to offer the... 11-04-2014, 09:45 AM
mikeinreco Well I sold one Mboard so... 11-06-2014, 03:56 PM
redcrossnj Ebays been kicking scraps ass... 11-06-2014, 04:00 PM
mikeinreco I hate to bring this up but... 11-06-2014, 04:04 PM
redcrossnj I got ya mike . a truck load... 11-06-2014, 04:10 PM
mikeinreco Yes I will have to say with... 11-06-2014, 04:13 PM
bigburtchino Come writers and critics who... 11-06-2014, 07:33 PM
mikeinreco Usually what I pay double... 11-17-2014, 10:21 PM
  1. #11
    Scrappah is offline Metal Recycling Entrepreneur
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,056
    Thanks
    318
    Thanked 1,416 Times in 674 Posts
    Quote Originally Posted by bigburtchino View Post
    Is the e-waste side of scrap business sustainable?, Was it just a fluke? Gold and the other PM's had their run and E-waste was just another "Gold Rush"? Is it worth the effort for such a diminished payment? How long before we see those better profits again? 1 year? 2 or will it be 5 years? If we invest in a E-wast business, what will it be like in 20 years? How can I better my return on my efforts and investment? Is it worth it? (heard that one before?).
    There's no doubt in my mind that it's both viable and sustainable. My objective from the outset was to set up an environmentally responsible process that could generate just a bit of extra income for a retired fulla. I am getting to an age where it's getting harder to do the "team of one" Iron Man carpentry gig. It's okay for the time being, but the handwriting is on the wall. The day will come that i have to hang up my hammer and go on to something else.

    Was reading an article in Forbes magazine a few years ago ..........



    Maine and Louisiana were ranked as the two WORST states in the union in which to operate a business. I've been operating a (very) small business here for the last fourteen years and i can see why. There are many factors in the mix. Suffice it to say that it would only take one or two critical errors in judgement to put you under. Most of our new startups fail within the first five years.

    Point being: If small scale e-waste works as proof of concept here it should work on a much larger scale in an environment that is friendlier to business.

    IMHO, so much of the success or failure of a new venture hinges on prudent management and making correct decisions. You've got to be really tuned in to the world around you because the only constant is change. You need forward vision and be able to accurately predict what the landscape is going to look like in a few years. You have to change and adapt before the next wave of change crests. To do more of the same harder because it always worked in the past is almost certain to be the kiss of death.

    I opted to scale back on e-waste this month simply because i can see some problems emerging in this particular business environment.

    There are much larger forces than myself in play right now.

  2. The Following 2 Users say Thank You for This Post by Scrappah:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook