Page 1 of 2 12 LastLast
Results 1 to 20 of 35

What's an EHS Consultant Doing in this Forum?

| General Electronics Recycling
  1. #1
    SeedToSequoia started this thread.
    SeedToSequoia's Avatar
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    Austin, TX
    Posts
    23
    Thanks
    2
    Thanked 25 Times in 13 Posts

    What's an EHS Consultant Doing in this Forum?

    Joined the Scrap Metal Forum on Feb 11th and that is the second question that I received on my introduction post. The reason is that I am happy to share the environmental, health and safety experience that I have and I am looking forward to continuing to learn the recycling industry from the wealth of employees on this site.

    A summary of my background. My last eight years have been in the recycling industry (e-waste), first as an operations manager and then as an EHS Manager. Over that time I have developed and maintained environmental, health and safety management systems that are certified to ISO 14001, OHSAS 18001, RIOS and R2. I have a lot of experience reviewing regulations, creating legal registers and performing compliance audits in the recycling industry. I also have experience responding to EHS incidents and performing root cause and corrective action.




    You can review my experience and services at the seedtosequoia website. I started my first post in the safety forum that is titled: "Got Questions for the Environmental, Health & Safety Manager?" I look forward to responding to your EHS questions and creating more posts in the future.

    Last edited by Mechanic688; 02-14-2015 at 05:30 PM. Reason: Increased size for easier reading

  2. The Following 8 Users say Thank You for This Post by SeedToSequoia:



  3. #2
    bigburtchino's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    California
    Posts
    1,647
    Thanks
    4,388
    Thanked 2,835 Times in 1,132 Posts
    From your experience, what would you say is the one thing that all e-waste recycling and/or scrapers doing that is done correctly? Also what is the one thing that most do wrong?

  4. The Following 5 Users say Thank You for This Post by bigburtchino:


  5. #3
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    I've been considering this for sometime now.However, learning who to contact, and where to apply or which certification would best suit my goal, gets confusing. Government website's are not very junkfreak friendly. But I still get most of what the info is. My problem is time! I don't have enough time in a day. And with the market the way it is I got less.

    Just a thought: upgrade your membership and offer your services here on the forum. If its allowed that is, don't see why it would be prohibited.
    Depending on the cost I think it would benefit the members here that want to go to the next level but are intimidated by the process.
    Just a thought, I get them every now and again hehe.

  6. The Following User Says Thank You to junkfreak for This Post:


  7. #4
    SeedToSequoia started this thread.
    SeedToSequoia's Avatar
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    Austin, TX
    Posts
    23
    Thanks
    2
    Thanked 25 Times in 13 Posts
    bigburtchino,
    Thank you for your question. I believe that most recyclers that I have observed have a good sense of the physical hazards in the workplace and they have developed appropriate (but could be improved upon) controls to safeguard employees like personal protective equipment, training and equipment checklists. The concern that I have with recyclers is not being able to control chemical hazards, especially with universal waste. The majority are unprepared to properly handle and clean up leaks and spills with products such as CRT and batteries. You have given me the idea that this may be one of the first posts that I put up on this site.
    Russell Ballard
    www.seedtosequoia.com

  8. The Following 2 Users say Thank You for This Post by SeedToSequoia:


  9. #5
    SeedToSequoia started this thread.
    SeedToSequoia's Avatar
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    Austin, TX
    Posts
    23
    Thanks
    2
    Thanked 25 Times in 13 Posts
    Junkfreak,

    A great question that every one that is determining whether to implement or improve an EHS system should ask. About three weeks ago I wrote a blog post to address this question called: “Your EHS Management System Should Be a Great Return on Investment – Part 1”. The post is located at BLOG. The post is a brief discussion on the benefits that need to be considered and weighed to decide whether to proceed and how to proceed. If you are looking for more specific information, feel free to contact me anytime at rballard@seedtosequoia.com.

    Regards,

    Russell

  10. The Following User Says Thank You to SeedToSequoia for This Post:


  11. #6
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    It's nice to have someone on the site who is a EHS professional, however...

    I would suggest that you upgrade your account, since you are obviously advising people to visit your website and to contact you using your personal email for your business I would suggest even paying for advertising.

    As well, even thought there do exist some larger corporations on this forum, that recycle, I would suggest doing a little research so that you understand the dynamic of this forum. Your consulting services while seemingly professional, do not take into account that the majority of the people that contribute to this forum are small scale, individuals who either own their own business and only have themselves or perhaps a couple other people who help or work with them. Or they are hobbyists earning extra money. To try an sell them on the idea that they need to pay someone to give them advice on how to do their work, how to be safe, etc is probably, in most cases, not going over so well.

    So, since you are a consulting business, posting links to your own site, and attempting to drive business in that direction, I would again suggest paying for advertising.

    I would also suggest that if you truly and honestly desire to contribute to this forum, that you post information here instead of only linking to your site. These are only suggestions I am making, as a member and individual on this forum as I am not involved in administering this site at all. I do not wish to mislead you in any way. But it does bother me as a member that you seem to be attempting to drive traffic to your website, instead of interacting with people here in the way we all do. Nothing wrong with doing business, but I feel you should be honest about why you are here, and do so in the proper way.

    In any case, welcome, I hope you become an active and contributing member of this forum, it's one of my most favorite.

    Scott
    At the heart of science is an essential balance between two seemingly contradictory attitudes--an openness to new ideas, no matter how bizarre or counterintuitive they may be, and the most ruthless skeptical scrutiny of all ideas, old and new. This is how deep truths are winnowed from deep nonsense. -- Carl Sagan

  12. The Following 9 Users say Thank You for This Post by NobleMetalWorks:


  13. #7
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,707
    Thanks
    1,191
    Thanked 2,350 Times in 964 Posts
    Quote Originally Posted by SeedToSequoia View Post
    Joined the Scrap Metal Forum on Feb 11th and that is the second question that I received on my introduction post. The reason is that I am happy to share the environmental, health and safety experience that I have and I am looking forward to continuing to learn the recycling industry from the wealth of employees on this site.

    A summary of my background. My last eight years have been in the recycling industry (e-waste), first as an operations manager and then as an EHS Manager. Over that time I have developed and maintained environmental, health and safety management systems that are certified to ISO 14001, OHSAS 18001, RIOS and R2. I have a lot of experience reviewing regulations, creating legal registers and performing compliance audits in the recycling industry. I also have experience responding to EHS incidents and performing root cause and corrective action.


    You can review my experience and services at the seedtosequoia website. I started my first post in the safety forum that is titled: "Got Questions for the Environmental, Health & Safety Manager?" I look forward to responding to your EHS questions and creating more posts in the future.

    I guess that answers that question... I was wondering why an Ethiopian Homeland Security agent would join our forum...

  14. The Following 2 Users say Thank You for This Post by t00nces2:


  15. #8
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    I'm married with 3 kids...........just what I need someone else telling me what to do and I have to pay them for it.............LOL (just kidding) Welcome to forum and wish you luck in your venture

  16. The Following 4 Users say Thank You for This Post by mikeinreco:


  17. #9
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Quote Originally Posted by mikeinreco View Post
    I'm married with 3 kids...........just what I need someone else telling me what to do and I have to pay them for it.............LOL (just kidding) Welcome to forum and wish you luck in your venture
    Oh we pay for it! Kids are gone ( well one is moving back in yea free labor) but the wife still bosses me around while iam depositing money. Lol wouldn't know what do without her.

  18. The Following 2 Users say Thank You for This Post by junkfreak:


  19. #10
    SeedToSequoia started this thread.
    SeedToSequoia's Avatar
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    Austin, TX
    Posts
    23
    Thanks
    2
    Thanked 25 Times in 13 Posts
    Scott,
    I am not sure I understand the concern that you have for me posting on this forum as I intend to have good interactions with members on environmental, health and safety topics.
    Yes its free advice with the desire that there may be some companies in the forum that may hire me to take their EHS to the next level. Last month I helped a company with five employees get certified to R2 (Responsible Recycling).
    Yes, I may respond to some questions with referring them to a blog post that I previously created on my website. I also intend on posting long columns to this site after I figure out some tech issues that I am having on this site.
    I guess I am feeling that you have singled me out although we are both here for the same reasons to interact, give advice, learn and generate business. I assume it is because you do not regard EHS consultation as important by stating: “To try and sell them on the idea that they need to pay someone…”.
    I hope that my assumptions are wrong and I hope that others can see the value that I can bring to this forum.
    Russell

  20. #11
    SeedToSequoia started this thread.
    SeedToSequoia's Avatar
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    Austin, TX
    Posts
    23
    Thanks
    2
    Thanked 25 Times in 13 Posts

    Mikeinreco,
    Thank you for the welcome.
    Russell

  21. #12
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    Quote Originally Posted by SeedToSequoia View Post
    Scott,
    I am not sure I understand the concern that you have for me posting on this forum as I intend to have good interactions with members on environmental, health and safety topics.
    Yes its free advice with the desire that there may be some companies in the forum that may hire me to take their EHS to the next level. Last month I helped a company with five employees get certified to R2 (Responsible Recycling).
    Yes, I may respond to some questions with referring them to a blog post that I previously created on my website. I also intend on posting long columns to this site after I figure out some tech issues that I am having on this site.
    I guess I am feeling that you have singled me out although we are both here for the same reasons to interact, give advice, learn and generate business. I assume it is because you do not regard EHS consultation as important by stating: “To try and sell them on the idea that they need to pay someone…”.
    I hope that my assumptions are wrong and I hope that others can see the value that I can bring to this forum.
    Russell
    I understand your desire to add validity to your business by expressing certain things on a site like this. However I do also realize that in doing so, imparting too much information would negate the need for a consultant.

    I also realize that it is most likely your intent to increase traffic to your own website, by using this forum, that would be a natural intention of anyone who owns a business, to increase traffic to their own site.

    For some, an EHS consultant may be useful, and important, but after reading your website I came to realize that you have posted some benefits which while seemingly part of what might be, generally are not and certainly not in the case where there is only one person doing the scrapping, or only a few.

    I used to own grocery stores, and hired an EHS consultant who did a great job suggesting posting posters, instituting training programs, etc so that I could lower my insurance rates. But honestly, it did not increase nor decrease the number of accidents as accidents are exactly that, accidents. We already had in place best practices and policies that allowed us to function at the highest level of safety. The only reason I hired an EHS consultant was to lower our insurance. However, after all was said and done, and considering the requirements of our insurance policy in reducing the cost of the insurance, it ended up costing almost the same to dedicate the labor for specialized training instead of doing so by managing as opposed to a special class set on a specific day where employees would be required to attend and thus also require to be paid for the study time.

    It's a balance to be sure, value added services often do add value, but often increase expenses as well. In attempting to drive business, you may be overlooking the fact that the majority of the people who post on this site, while finding any information you impart here useful and important, will not be buying your services as a consultant.

    If your intent is to drive traffic to your own website by posting links, and your personal email address so that they contact you outside of this forum, so that you can impart pricing information on consulting for them, then any monies you gain were at the expense, or perhaps more correctly because you were exposed on this site and you perhaps might think about upgrading your membership to reflect your appreciation of this fact.

    I do not know you, and you have yet to spend enough time on this site to allow me to make any kind of judgment call about your intentions or actions, as well I am not even inclined to judge anyone. But I would suggest supporting this site more than only posting links to your own website. And if it does turn out that you impart useful and important information that can be retained on this forum for all future members, and current members for that matter, then that is a wonderful thing. But the key is that the information you may impart be done on this forum, so that it can be retained for it's members. There is no guarantee that your site will always be in operation as you may sell your business, move onto something else, fail even although I would like to avoid that scenario, or otherwise. Having the information here ensures that it will continue to be accessible for posterity, not only for your benefit but for the benefit of everyone who attends this place on the web.

    I am not sure how you can reason that I must have no faith in EHS consulting, just because I stated the obvious in that you are trying to sell people on the idea that they need a consultant, when the vast majority of people on this site actually do not need a consultant, only information. Matter of fact, since hiring a EHS consultant, I have never required one since because I retained the knowledge. The majority of time, small businesses incur more cost in hiring an EHS consultant, than they receive in benefit as I have stated above. Most of the businesses on this forum are smaller rather than larger, however there are larger businesses that might be able to, in a cost effective manor, hire your services and benefit from them. Most of the people here will benefit from your generosity in providing valuable information. If you have not already noticed by my own posts, and those of others, we impart valuable information here in a fairly regular basis without sending people to websites we own, or others we are attempting to drive business on. As well, you will also notice that those who are advertising buying, do so on a specific thread that has been created for them to do so which they must first provide a donation for in order to have a buyers thread. You will also notice that there are places provided for paid advertisement, and that some choose to do this as well. While these have been made available for your use, I do not see that you have used any of them and would encourage you, as a paying member myself, to make use of these offerings to increase your exposure in a way that also benefits this forum, and thus benefits all of us in that way as well.

    While I can appreciate what you have stated, in that you are here to exchange information, to impart information to help others, and by the way I think this is a wonderful thing. I also am concerned as to your intent, and the fact you are attempting to drive business that is service related that specifically is set up for people to pay you, for this same information and advice you seem to be insisting you will provide here, on this forum, in the form of posts. That seems contradictory to your business model if we are being totally honest.

    Without getting into specifics on the things you state on your website, as I would not want to affect your intended business in a negative way. We can say with a reasonable amount of certainty that most of what you state on your website as benefits in paying you for your services, would not be so for small businesses under a specific number of people. Without stating more I think we can agree on that point, if we are being totally honest.

    My problem has always been that I say exactly what I think without reservation, usually. I have reserved some of what I might have said in respect for the fact you are a business owner, and attempting to drive your business in a way that leads me to believe you have not only just started it, but intend if by sheer will alone, to make it work. I respect that, being a business owner myself. I do not want to affect your business in anyway that might be negative. But I also believe that the people here are very good people in almost every case, and I consider them the type of people we need to see more of in this world. I would see them elevated because of the information that is shared, that they share and discuss, that others share and discuss rather than sent to another site. I would also prefer to see them increase their own businesses without the additional costs of things they can obviously do without if only they have the information required to do so. To this end as well, I would welcome any information you post here, and encourage you again to do so. But I would also encourage you to do so here, instead of driving the traffic and discussion here, to your own website. It is just as simple to copy and paste that information here as it is to post a link to the information on your site, there are no specific technical issues you have to contend with. The only difference is that one is a button you have to click to enter your website link, and the other simply what you do anyway, posting text in a box such as I am doing currently, which by the way seems to be something you are more than capable of doing, without any technical difficulties at all.

    Scott

  22. The Following 10 Users say Thank You for This Post by NobleMetalWorks:


  23. #13
    searcyarkansasscrapper's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Searcy, Arkansas
    Posts
    107
    Thanks
    82
    Thanked 68 Times in 43 Posts
    Well said Scott.

  24. #14
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Thanks Scott. Wow!

  25. #15
    SeedToSequoia started this thread.
    SeedToSequoia's Avatar
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    Austin, TX
    Posts
    23
    Thanks
    2
    Thanked 25 Times in 13 Posts
    "accidents are exactly that, accidents.” Yikes! I hope that is not the knowledge that you received from your EHS consultant experience. EHS is about putting in controls for risk avoidance (likelihood of accident x magnitude of accident).

    There appears to be a lot of opportunities for an EHS expert to provide his knowledge and experience. It does not matter what the size of the company is, it matters what is the future intention of the company. That appears to be a great discussion for one of my next posts.

  26. The Following User Says Thank You to SeedToSequoia for This Post:


  27. #16
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    Quote Originally Posted by SeedToSequoia View Post
    "accidents are exactly that, accidents.” Yikes! I hope that is not the knowledge that you received from your EHS consultant experience. EHS is about putting in controls for risk avoidance (likelihood of accident x magnitude of accident).
    While I can appreciate the fact that you can express sarcasm, I have chosen not to turn this thread into a sarcastic, humorous post, as I believe it's an important thread even though you may not. If you want to turn this into something like this, please express the fact and I will express myself in such a sarcastic manor as you will find it difficult to eat or drink without spitting up all over your computer screen. Until that time, I will express myself on your thread, in a professional manor, regardless of your insulting sarcasm.

    But please, do allow me to explain the point I was attempting to make, which seems to have been lost on you. Being that you are a self described EHS consultant, I would think you already would understand the terms that the insurance industry uses. Accidents generally are not a term that they prefer to use, allow me to present an example:

    If you are driving, and are involved in what most people call an "accident", when you receive your police report, or read your insurance documents, it will almost certainly be described as a "collision". The reason for this is, that when what we call an "accident" occurs, it is almost never an accident, but because of some error that was made, and thus it is called a collision. An "accident" refers to chance, something that happens outside our ability to negate or control it. If you look up the meaning for the word accident you will find both explanations, however the insurance industry uses other terms to describe what we might call accidents, so that it is clear it was not chance.

    In the future, I would appreciate it if you would keep the discussion on topic, rather than attempt to make it seem that I am lacking in safety, or my understanding of it. Have you ever in your experience, consulted for someone who works with things that are so deadly, and so incredibly toxic to humans, that any mistake could cause death? I deal with these types of dangers on a regular and consistent basis, as do others on this site. Suggesting that I do not value safety in stating plainly that an accident is an accident, meaning that they happen because of chance and cannot be avoided, could lead others to believe that I do not take seriously the safety concerns related to my chosen profession. And that sir, I will not put up with, not even for a sarcastic joke.

    Quote Originally Posted by SeedToSequoia View Post
    There appears to be a lot of opportunities for an EHS expert to provide his knowledge and experience. It does not matter what the size of the company is, it matters what is the future intention of the company. That appears to be a great discussion for one of my next posts.
    You are right, there are many opportunities for an EHS expert to provide HIS/HER knowledge and experience. And you are also right, it does not matter the size of the company at all if you are actually imparting the information on this forum, for no fee at all. What I said was in direct relation to your seeking to drive business on this forum. Being that the majority of the people who do own businesses, own small ones that can ill afford to absorb the costs of a consultant. I was actually giving you advice, although perhaps not wanted, about the size and scale of the businesses that exist on this forum. That is not to say there are not businesses of the right size, that generate enough revenue, that would not be allowed to pay you for your services, on this forum. But only to say that the majority of people who contribute, and selflessly I might add, to the accumulated knowledge of this forum also happen to be those people who would not pay for your services.

    As of right now, while I write this post, at 7:45 AM on a Tues, and I am posting from California so we are talking about 7:45 PST There are currently 707 users online. 58 members and 649 guests. That is a lot of people, online, right now. A lot of paid members. I would wager that the majority of those members paid for their membership even though it was not really an expense they wanted to incur or could easily afford. But they value this forum so much, that they did so anyway. For many of those that cannot afford to purchase a membership, they are imparting valuable information that can be accessed and used by members, and guests. YOU have stated:

    Quote Originally Posted by SeedToSequoia View Post
    Joined the Scrap Metal Forum on Feb 11th]
    Yet in the 6 days you have been on this forum, the only thing you have been able to do is post your expertise, and state repeatedly that you plan to post information we might find valuable. You did however give your reasons for not doing so:

    Quote Originally Posted by SeedToSequoia View Post
    I also intend on posting long columns to this site after I figure out some tech issues that I am having on this site.
    Yet I have not seen one post asking anyone to help you with your technical difficulties. Matter of fact, on the contrary, I have seen you post in even just this thread, in many different ways. In quoting you I have stripped away all the bold, enlarged font, etc in your posts which you seem to have no problem operating, to good affect. Matter of fact, considering all you have to do in order to post "long columns" in a post, is simply to just copy and paste what you have already accumulated on your own website. Yet, still, you have not done so.

    I would like to point out, that if I hired a consultant who promised to give me information, and did not do so for a full week, I would hold that consultant as suspect.

    I also get the feeling that you do not fully understand the real value of this website. So allow me to act as consultant for you in this regard, and impart some important information you seem not to be aware of.

    This forum, this place, most likely has more accumulated knowledge on recycling, material handling, hazardous waste and how to deal with it, recovering valuable assets, re purposing and much more, than any other single repository of information anywhere on the internet. Do you have any idea what that should mean for someone like you, with very little experience in comparison to the thousands of years worth of accumulated knowledge that exists on this forum? Think about this, intelligently. There are currently, as I write this, 22,060 threads, 219,489 posts and 18,207 members. If each member only has 1 years worth of experience, that is over 18 THOUSAND years of accumulated experience. You yourself have stated that:

    Quote Originally Posted by SeedToSequoia View Post
    My last eight years have been in the recycling industry (e-waste), first as an operations manager and then as an EHS Manager.
    And while I can understand why you might move from being an Operations Manager to an EHS Manager, as the pay range is from about 50k-60k per year for an Op Manager, compared to about 55k-65k for an EHS manager in the scrap metal industry, I have to ask myself the question "how many years of actual experience as an EHS manager does this gentleman actually have?" Compared with the literal, thousands of years of accumulated experience on this website, it would seem that you most likely have far more to learn here, than you could ever impart in what I am sure is valuable information, but yet you still have not imparted.

    My point is that if you stop, and think about the real value of posting your information, compared to the real value of the information you have access to, there is a huge giant deficit. I realize this, I understand, and humbly so, that there is far more for me to learn here, than I can ever hope to impart. This is also why I choose to support this forum by becoming a paid member. So any information that you do choose to post here, will never be nearly as much as the valuable information you have access to. I would keep this firmly in mind when re-stating over and over your intent to post columns of information. You have far more to gain by being here, than you could ever give back. And if you are as good of an EHS manager as you seem to be leading us to believe, and if you just last month helped someone with licensing, I am sure you can easily afford the membership fee, and would encourage you to become a member.

    Regardless of the way my responses to you might sound, I can appreciate the fact you are here, and also consider a consultant of your type a valuable forum asset. But you will not actually become so unless you contribute. When you post links to your own website, you are not contributing here. When you post and encourage people to ask you questions, via your personal business email address, you are not contributing here. When you repeat, over and over that you will post yet do not, you are not contributing here. Please, contribute, engage, enjoy more importantly. You will find the people here are very appreciative, and very very friendly regardless of how I might sound myself. These are good people who freely share what they otherwise could sell to others as a consultant. Who give their time, freely, without any promise of reward or monetary compensation. Who will challenge you in ways that will help you grow your business and help you become a much better consultant. You do not even have a decade in this industry, and I suspect if you were an operations manager prior to a EHS manager, you most likely do not have Project Management experience which is a huge plus in your chosen consultancy field. Not that you need it, but you could certainly learn it here. There are so many people who have experience in exactly that field, organic and natural, that you stand to learn very valuable information just by interacting with them. There are a few really good threads on project management, large scrapping efforts, I would encourage you to access them.

    Take what you will from what I have said. If you wish to engage me in intelligent and thoughtful conversation I would gladly engage you. If you use sarcasm in order to make it seem as if I do not care about safety, or for any other negative purpose I will simply do as I have done here, correct you and then point out those things I think are more important. I do not wish to turn this into a tit for tat argument. My intent is to encourage you to become an active, valuable, contributing member of this forum because I do happen to understand the value you might bring, if you do only what you have stated you plan to do.

    And if another week goes by, you have not imparted the information you have stated you intend to, I think perhaps I will make the time myself, and post information I believe would be important in this regard on this subject. I believe it is that important for that information to exist here. But I would like to see you do so instead, so please do.

    Scott

  28. The Following 3 Users say Thank You for This Post by NobleMetalWorks:


  29. #17
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    OK seed. Since my first post:
    I talked to my insurance rep.(workman's comp.)
    Researched OSHA
    ". Epa
    My findings: they have" free" info in hard copy that they are sending me
    Also my insurance company has a program that trains you in work place safety for free, so that you can train your employees.
    So, my question is, why should I pay for this service?
    Iam not being negative. To be honest I never knew companies that provide your services ever existed till you posted.
    Last edited by junkfreak; 02-17-2015 at 12:19 PM.

  30. The Following User Says Thank You to junkfreak for This Post:


  31. #18
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    so eloquent!!!!!!!!! Thanks again

  32. The Following 2 Users say Thank You for This Post by mikeinreco:


  33. #19
    submarinepainter's Avatar
    SMF Badges of Honor



    Member since
    Sep 2011
    Location
    Maine
    Posts
    1,025
    Thanks
    1,230
    Thanked 654 Times in 316 Posts
    Welcome!
    Old dogs care about you even when you make mistakes;
    God bless little children while they're still too young to hate

  34. The Following 2 Users say Thank You for This Post by submarinepainter:


  35. #20
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Noble, members like yourself inspire me to learn as much as as I can.
    I've always love learning something new.

  36. The Following 2 Users say Thank You for This Post by junkfreak:



  37. Similar threads on the Scrap Metal Forum

    1. Hello forum
      By dshrader in forum Introduce yourself
      Replies: 14
      Last Post: 01-13-2014, 09:42 AM
    2. New to the forum
      By mcemc in forum Introduce yourself
      Replies: 2
      Last Post: 01-02-2014, 06:56 PM
    3. New guy to the forum
      By ScrapperLuke in forum Introduce yourself
      Replies: 6
      Last Post: 07-05-2013, 10:45 PM
    4. New To The Forum
      By JCL1 in forum Introduce yourself
      Replies: 8
      Last Post: 03-16-2013, 04:24 AM
    5. New to the forum
      By queevil in forum Introduce yourself
      Replies: 6
      Last Post: 02-18-2012, 11:22 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook