I sold a bunch of boxes ceramic CPU's that finally got full by category. I didn't take any pictures (I should have because it was real nice load!), but here are some of the nice ones and boxes I am still filling up.
Gold cap and gold legs
I sold a bunch of boxes ceramic CPU's that finally got full by category. I didn't take any pictures (I should have because it was real nice load!), but here are some of the nice ones and boxes I am still filling up.
Gold cap and gold legs
Life is tough, but it's tougher when you're stupid. - John Wayne
Those Proms go for $250/lb right?
I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!
Sweeeet! Mike
"Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}
Now go beat the copper out of something, Miked
From my understanding the Pentium pro has .30 grams of gold content. Maybe .35 grams of gold. Say it takes 3 pros to equal a gram of gold. Weigh 3 pros and see the weight or throw pros on the scale until you get a pound of material.
Now take some mixed proms and throw them on the scale until you get a pound. Now set down and do some measuring and you will see that the mixed proms have a greater value than the pros pound per pound. Those proms sell for $250.00 a pound on ebay.
People have to understand what a socket pulled chip is and a desoldered chip is. A socket pulled chip is one pulled from a ic socket without solder. It is a clean chip with the gold plating in place. A desoldered chip is one that you take a heat gun to desolder it or cut it from the board. When anything has been soldered to the board and you desolder it some of the gold stays behind and is lost.
Socket pulled no solder on the leads pins or legs whatever you want to call them will bring a premium if there is no solder on them.
Chips that are attached and desoldered from a board don't bring that much due to lose of gold and the tin solder.
The size of chip or item is a big factor in the price paid. The smaller a item is and the more it takes to make a pound the more precious metals to be recovered.
I hope people understand what I am saying.
When dealing in this type of business everyone involved needs to leave a little something on the table for the next person to make a little money. People cant lick all the cream out of the bowl and leave sour milk for the ones behind them.
I want to put up a buyers ad in the buyers forum but I would be a selective in what I would buy. I would rather meet sellers in person versus mail in sellers.
Last edited by eastky; 09-08-2016 at 06:03 PM. Reason: misspelling
The MAY sell for $250/lb on ebay to someone who is delusional and has a case of "gold-fever"
I will crunch the numbers. On 1 Lb of these you are looking at between 2-4g per 1 lb.
Spot price for 1 gram of gold as of today is $42.96
So if you are on the low end- 1 lb will net you $85.92 if you recover 2g
3g = $128.88
4g = $171.84
So you see- if someone pays $250/lb for these.. they are a lollipop.
Btw: It takes 5.33 Pent Pro's to make a lb. They sit at 3.0 oz each.
And just FYI.. we know what a de-soldered vs pulled chip is. We are smarter than you are giving us credit for!
Also the smaller or larger chip size is irrelevant in what it pays. It's the content of recoverable material that matters. That is why a smaller chip 386 or 486 pays more than an Pentium Pro per lb. More bang for the buck.. more gold in the chip per lb.
Last edited by sledge; 09-08-2016 at 08:03 PM.
I agree. Although, it takes a heck of a lot of them to get a pound. The ones I have look like the majority of yours( gold cap fills the center area ) and measure right at 15/16" sq. They weigh 4 grams each = 112 per pound. Can't remember where it was but it seems like I saw some one was paying $245 per pound. Interestingly mine are marked "AMD" and "Intel 1982" on the same chip.
Just wondering, what would be a good eBay price for what's in the pics, and what's a good escrap price.?
I have never seen a rectangle pentium pro, the best I have seen (whole) is a K5. I have reqd that a Pentium is 0.5grams Gold and its downhill from there.
Is there a defining accurate reference table somewhere for the amount of Gold in CPU's?
It isn't just the pins or the gold cap that contains gold. If ceramic chips are crushed.. there is gold INSIDE the chip.. a wafer if you will.
It isn't just what you can see from the outside.. sometimes it is also what is on the inside that matters!
This is what is inside a Pentium Pro:
http://photos1.blogger.com/x/blogger...ipart67085.jpg
That just goes to tell how ill informed you are. There isn't any gold inside the ceramic. Take the gold plated cap off and you will have gold under the silicon die that is soldered with gold solder to hold the chip in place. A Pentium pro has about 1/3rd of a gram of gold in it.
You cant compare a 386 or 486 cpu to the Pentium pro weight or size wise because the 386 and 486 had a higher gold content in the chips to begin with.
People may not believe it but in collecting gold plated things the lighter and smaller the item the higher the gold content.
Thanks for the pin count. Just wanted to see how many it had. I have only had 1 Pentium pro and put it on ebay.
I don't collect cpus because everyone thinks they are dripping with gold. I collect small gold plated items that don't weigh much and takes a bunch of them to make a pound.
14 and 16 pin purple or white gold plated leads with gold plated cap. That's the money.
What I see in picture #2 is $5,000-10,000+ in potential motherboard sales that were scrapped at $3/lb!
I find you amusing! I show you proof of what is inside a chip, and yet I am "ill informed?"
Since you have never held one in your hand, by your own admission, and apparently know little to nothing about this subject. I find my time better spent elsewhere.
Providing facts to you is apparently a waste of time!
There are currently 5 users browsing this thread. (0 members and 5 guests)
Bookmarks