Results 1 to 20 of 72

E-waste Pics

| General Electronics Recycling

Threaded View

JJinLV E-waste Pics 10-26-2017, 12:38 AM
msmoorad in the 1st pic, dont u remove... 10-26-2017, 01:11 AM
JJinLV For sure will. Just planned... 10-26-2017, 01:33 AM
JJinLV This is a Teledex hotel... 10-26-2017, 11:32 PM
JJinLV This is a 3com 24-port... 10-26-2017, 11:41 PM
JJinLV These two boards (along with... 10-27-2017, 11:54 PM
JJinLV These boards are from an... 10-29-2017, 10:07 PM
crbaker41 your slot machine mother... 10-27-2017, 05:42 AM
jimicrk Hey JJinLV, on the Teledex... 10-27-2017, 02:59 PM
JJinLV Can't speak for all buyers... 10-27-2017, 07:54 PM
jimicrk I take the wires off also.... 10-27-2017, 08:21 PM
JJinLV Local insulated wire prices... 10-27-2017, 10:05 PM
armygreywolf looking at the tape drive i... 10-30-2017, 10:21 AM
mthomasdev I'd have to agree with TJ,... 10-30-2017, 11:37 AM
aurum I include the tape drive... 11-01-2017, 08:14 AM
miked I took apart some old POS... 11-03-2017, 07:10 AM
JJinLV This is an HP LaserJet 4... 11-17-2017, 11:58 PM
mthomasdev It's great that you have time... 11-18-2017, 07:05 AM
JJinLV Hope it works out for you and... 11-18-2017, 08:47 AM
mthomasdev I'm thinking of trying Dazz... 11-18-2017, 02:12 PM
JJinLV These boards came from a 3d... 11-18-2017, 12:28 AM
JJinLV These boards come from a... 11-30-2017, 08:16 PM
JJinLV These boards came from a... 11-30-2017, 08:35 PM
JJinLV This is a Hewlett Packard... 12-15-2017, 12:18 AM
JJinLV These are the boards from a... 12-17-2017, 10:47 PM
JJinLV This is a Barracuda Networks... 12-22-2017, 10:21 PM
JJinLV This is a VisioWave Discovery... 12-22-2017, 10:42 PM
JJinLV This is a Pelco System 9760... 12-22-2017, 10:54 PM
JJinLV This is a Foundry Networks... 12-25-2017, 12:18 AM
JJinLV This is a Cisco 2800... 12-25-2017, 12:34 AM
JJinLV These are from a Pelco DX... 12-25-2017, 12:44 AM
crbaker41 that foundry board is really... 12-25-2017, 08:08 AM
JJinLV This is a Cisco UCS 6120XP... 01-11-2018, 02:15 PM
JJinLV These are from a Bose 5-CD... 01-27-2018, 10:16 PM
JJinLV This is a K-Hub Internet... 01-27-2018, 10:23 PM
JJinLV These are from an SMC... 01-27-2018, 10:30 PM
JJinLV These are from a Nintendo... 02-18-2018, 10:58 PM
JJinLV This one I picked up as is.... 02-18-2018, 11:04 PM
sledge Now THAT is some Gold Board... 02-19-2018, 04:05 PM
JJinLV Not sure what this backplane... 03-06-2018, 12:16 AM
JJinLV This is another board with... 03-06-2018, 12:42 AM
JJinLV This comes out of another... 03-06-2018, 12:53 AM
JJinLV This is a DCA 80-20048-000... 03-06-2018, 01:10 AM
JJinLV This is an Octel LAN Card... 03-06-2018, 01:16 AM
JJinLV This one is a Nokia and comes... 03-06-2018, 01:33 AM
JJinLV Can't source this one either.... 03-06-2018, 01:47 AM
Breakage This is from some kind of... 03-27-2018, 01:06 PM
JJinLV This is from a transmitter... 03-06-2018, 01:50 AM
JJinLV The mother of all VCRs! All... 03-26-2018, 01:35 PM
JJinLV This is Foundry Networks... 12-22-2017, 09:57 PM
miked What are you doing with your... 12-23-2017, 09:24 AM
JJinLV Just clipping the pigtail and... 12-23-2017, 10:45 AM
miked I'm doing more tv's and power... 12-23-2017, 12:00 PM
APA Great pictures and info 01-28-2018, 05:53 AM
msmoorad thats some hardcore scrapper... 03-06-2018, 02:54 AM
JJinLV Gonna reactivate this thread... 07-18-2020, 02:50 PM
  1. 01-27-2018, 10:23 PM #17
    JJinLV is offline
    JJinLV started this thread.
    SMF Badges of Honor
    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,321
    Thanks
    3,210
    Thanked 1,915 Times in 781 Posts
    This is a K-Hub Internet Weather Forecaster used to connect satellite receivers to the internet. One quick pry with a flathead and you're done, no screws no nothing. Tiny board but entire process takes about 3 seconds.





  2. The Following 3 Users say Thank You for This Post by JJinLV:

    DiamondN, miked, msmoorad
« Electronic board - looks low grade? | Bitmain Antminer t9_11.5 T modules - I have four pallets »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.




OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules


The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF Recommended Links

SMF on Facebook and Twitter

Twitter Facebook