Results 1 to 6 of 6

Hobbyist E-Waste Enthusiast - Chattanooga, TN

| General Electronics Recycling
  1. #1
    theod3 started this thread.
    theod3's Avatar
    SMF Badges of Honor


    Member since
    May 2022
    Location
    Ooltewah, TN
    Posts
    10
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Hobbyist E-Waste Enthusiast - Chattanooga, TN

    So I'm super intrigued by e-waste. I love watching videos of people repairing vintage electronics and others things. Planning to teach myself how to solder and maybe do custom builds from reused electronic components. I'm not sure if this is the best place for these questions, but there seems to be a lot of traffic here, so it looks like a good place to start.

    It's highly unlikely that I will ever accumulate enough scrap to really make it worth my while to sell boards and such for money. I enjoy the tear down process immensely and can sit for several hours breaking stuff down to their uttermost and separating all the different metals. My first batch of breakdowns were a half dozen printers they were throwing away at work and some random boxes of cables and a few junk hard drives. I had a blast. Now I have a small bucket full of various boards, probably mostly low and mid grade, but a few high grade. Some are pretty old.

    Does anyone have any links to any electronic hobbyist forums where I might be able to more finely tune what I'm doing?

    If I go the route of depopulating the boards (undecided), what do I do with the board? Tin shred? or are they still considered low grade even with a lot of the components missing? I've heard of some people shredding them and putting them in leaching vats to get all the metals, but I don't think I'm interested in doing much chemistry. Especially with a toddler around.



    Can the ABS plastic go into typical plastic recycling? One thing I've definitely determined by starting this hobby is that I want to recycle as much of what I breakdown as possible and keep it out of the landfill.

    Can anyone in the Chattanooga area recommend a scrap yard? I'll have a fair bit of steel and aluminum built up.
    Last edited by theod3; 05-31-2022 at 01:02 PM.

  2. The Following User Says Thank You to theod3 for This Post:



  3. #2
    CopperMiner's Avatar
    SMF Badges of Honor


    Member since
    Jun 2021
    Location
    Greater Montreal
    Posts
    320
    Thanks
    181
    Thanked 205 Times in 119 Posts
    Printers are probably the worst e-waste items to dismantle. They're dirty and low in metals (unless they're the larger ones or the copier type ones). The boards are you'll get are probably not enough valuable to ship them to the specialized buyers and are probably good for shred after you pull everything you want to save or sell apart. Ewaste is a hard niche, just check out the recent threads.
    NEW TO SCRAPPING? READ THIS: Build up your horde of magnetic and non-magnetic metals in two piles until you have a better understanding of the business. Magnetic material has low value and is mostly always steel / shred / short iron. Read old threads about non-magnetic metals and ewaste (and how to sort them), but don't forget that they generally have absolutely no tolerance for contamination (screw / iron / foreign material).

  4. #3
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Hi and welcome to the forum from Las Vegas! And thank you for sharing in the joys of breaking stuff! Since the goal is the process itself every desktop printer made since around 2005 should have at least two Mid Grade circuit boards (One underneath the button panel and one where the USB plugs in) and one Power Board (where the power cable is or connects) plus a small handfull of low-grade wire, some papery thin ribbon wire you can put with the power boards and a bunch of plastic and steel, the latter on occasion stainless steel. It can be fun and meditative even breaking them down. Older printers can commonly have telecom grade boards and gold or silver RAM as can older faxes, word processors and even keyboards! Your results are always welcome, especially with photos for all us scrap nerds.

    I learned how to do custom builds exclusively through destruction. So if you're attentive and take photos and notes for reference you can learn every different connector, what kind and how many of what connectors are necessary on a motherboard in order to [whatever the build goal is] and so on. It's super interesting especially when you get to the point where you can have a strong guess at what a board does just by looking at it and understanding its architecture.

    Chatanooga is large enough that *someone* there should accept ABS. Check with whoever does your curbside recycling to see if they do.

    Be careful depopulating boards at all with a toddler around. Older circuit boards often have lead solder and even newer ones can depending on a variety of factors. Plus all kinds of other hazards. There are ways but you have to take extrordinary care. I wouldn't do it.

  5. #4
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Quote Originally Posted by CopperMiner View Post
    The boards are you'll get are probably not enough valuable to ship them to the specialized buyers
    Depends on the quantity! If the place you're shipping isn't too far and you have the time and space to save a gaylord quantity it's very worth it even for low-grade and power boards.

  6. #5
    theod3 started this thread.
    theod3's Avatar
    SMF Badges of Honor


    Member since
    May 2022
    Location
    Ooltewah, TN
    Posts
    10
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by CopperMiner View Post
    Printers are probably the worst e-waste items to dismantle. They're dirty and low in metals (unless they're the larger ones or the copier type ones). The boards are you'll get are probably not enough valuable to ship them to the specialized buyers and are probably good for shred after you pull everything you want to save or sell apart. Ewaste is a hard niche, just check out the recent threads.
    haha, I am 100% uncertain that you even read my post with that response
    Last edited by theod3; 06-01-2022 at 07:44 AM.

  7. #6
    theod3 started this thread.
    theod3's Avatar
    SMF Badges of Honor


    Member since
    May 2022
    Location
    Ooltewah, TN
    Posts
    10
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Hey,

    Do the curbside recycling places actually recycle ABS? I've read where a lot of things that are picked up for recycling ends up in the landfill anyway.

    I have a friend who is building a refining setup. If I decide to depopulate, I'd probably haul my stuff over to his place for an afternoon and hang out. He's single so I don't care if he gets lead poisoning :P Since my volume is going to be so low, I feel like depopulating is probably ultimately the way to go for stuff I'm not going to repurpose. I don't have the storage to stack up boards to eventually sell.

    Are depopulated boards just trash or do they go in with the low grade boards at a scrapyard? I wouldn't try to sell them to a board buyer obviously.


  8. Similar threads on the Scrap Metal Forum

    1. Shred prices around Chattanooga, TN today.
      By HyderConsulting in forum Scrap Metal Prices
      Replies: 7
      Last Post: 10-09-2022, 07:56 PM
    2. Tech enthusiast and noob to scrapping - Hello from Texas!
      By Troika in forum Introduce yourself
      Replies: 7
      Last Post: 05-07-2019, 06:11 AM
    3. Wisconsin Enthusiast
      By Palmer in forum Introduce yourself
      Replies: 2
      Last Post: 01-23-2018, 07:13 PM
    4. New Hobbyist in Bloomington, IN
      By Nubs1201 in forum Introduce yourself
      Replies: 6
      Last Post: 07-20-2017, 07:07 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook