Results 1 to 15 of 15

Any opinions on this lot

| General Electronics Recycling
  1. #1
    mikeinreco started this thread.
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts

    Any opinions on this lot

    I am almost done processing all the material which I have and need some more ASAP



    Any opinions on how high I should go on this lot
    http://www.govdeals.com/index.cfm?fa...436&acctid=350


  2. #2
    AuburnEwaste's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Metro Detroit
    Posts
    773
    Thanks
    32
    Thanked 976 Times in 413 Posts
    Every time I see those P4 optiplex towers at auction they go for way more than scrap value.

  3. #3
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    sun servers are ok but most of the ones I have have pinless peocessors in them , very low grade, the heat sinks are nice, tin covered copper about 12 oz each. but they will proly go for twenty a piece plus your cost to pick up, and the monitors are crap. and whats in the boxes?. how many computers and how many servers, just sayin.

  4. #4
    mikeinreco started this thread.
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Yeah I have been watching these auctions and they always go over scrap value.....Something will come up it always does.....

  5. #5
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    nothing works quite like going to see it yourself. Then you can look inside one or two to see if they've been stripped of ram and hard drives. I think i can count 28 towers. I'd always set up ones i could and sell locally, just run an ad in the paper. P4's gotta still be good for something. Hek, i'm on a PII right now (because I don't feel like shutting it down and swapping the processor ; ) You can get tag numbers off those dells and put it in a search at dell.com to see what board and CPU speed it's got, what RAM etc. If you can't get there to see em, maybe they'll give you some numbers over the phone? That server might still be re sale-able too, or at least parts from it. I used to buy that old stuff and ship parts all over the world, where they're still using older machines.

  6. #6
    SMF Badges of Honor

    Member since
    Jul 2011
    Posts
    962
    Thanks
    611
    Thanked 1,399 Times in 431 Posts
    i had seen GX520s with no guarantee on them working, or how many parts are present sell for over $45.00 unit... i dont know about these govdeals auctions any more.
    Specializing in Maximum value for mixed precious metal printed circuit boards and electronics

    Check out our pricing and read some of our RAVING reviews: http://www.scrapmetalforum.com/scrap...tal-scrap.html
    QUESTIONS? Email us: info@CashForComputerScrap.com
    or Chat with us: www.CashForComputerScrap.com

  7. #7
    thortek's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Scrap biz in OHIO, but I live in south Florida!
    Posts
    513
    Thanks
    153
    Thanked 425 Times in 204 Posts
    Mike, I'd go as high as $250. It looks like the pallet is stacked double deep. At $5 each you'll make your money back on the case and a motherboard if it has one. anything else is Profit. That's not including the scrap from the monitors, ETC. I bid on the pCs and take the rest as fluff. If you want to pay nearly full scrap price for the pc's go as high as $10 each, but that doesn't leave you much additional profit, it'd be strictly in the monitors.
    “Most people miss opportunity because it wears overalls and looks like work .” ― Thomas A. Edison

    www.thortekrecycling.com

  8. The Following User Says Thank You to thortek for This Post:


  9. #8
    mikeinreco started this thread.
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Quote Originally Posted by thortek View Post
    Mike, I'd go as high as $250. It looks like the pallet is stacked double deep. At $5 each you'll make your money back on the case and a motherboard if it has one. anything else is Profit. That's not including the scrap from the monitors, ETC. I bid on the pCs and take the rest as fluff. If you want to pay nearly full scrap price for the pc's go as high as $10 each, but that doesn't leave you much additional profit, it'd be strictly in the monitors.
    Thanks that's what I was thinking $300 MAX

  10. #9
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    yall see $10 in scrapping a computer? i'd fix em and sell locally. If you've got a corporate xp set up one system, those computers are all the same likely, once you get one set up, updated, and maybe an intivirus program with it, then all you gotta do is run copies to each drive, and the next one's ready. I used to do that with a corporate 2k Pro, and loved having multiple units that were alike. All you gotta run is one ad, soon as the first one sells, set up the next one, phone rings, "you still got that computer?, Yeah, it's settin here ready to go " Sell the same computer ten times over

  11. #10
    mikeinreco started this thread.
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    I need a partner like you BEar...LOL....I'm not much at putting **** together but I sure can tear it apart.....Oh well I just need to buy a lot of these things and try to fix some I guess to see if I can do it

  12. #11
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    it's easy man. parting out things like that server works well too

  13. #12
    mikeinreco started this thread.
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    I think I just need to get some parts together and try to build one I guess...LOL

  14. #13
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    computers has been my main thing, i always set out to build them, not scrap em, hek i only found this forum searching for a buyer for some old boards
    when i'd buy a whole lot of them, i'd hook em up one at a time and get em all sorted out, that was the fun part, figuring out what all was there

  15. #14
    SMF Badges of Honor


    Member since
    Aug 2013
    Location
    Maine
    Posts
    38
    Thanks
    21
    Thanked 26 Times in 4 Posts
    need groups opinion and recommendations on how much to buy these for:
    here is the details from a closed computer place here in maine:


    Total weight of the remaining items is about 2300 pounds,

    About 31 Servers, 104 hard drives, then some various mother boards, SCSI cards, about 48 Intel CPU and other PC and Laptops that are not on the list.

    Most of the 31 servers use copper heat pipes (copper tube mounted to a 2x2x.25 slug).The large server rack must weigh over 400 pounds.

    5-10 servers various mother boards, and various cards that do not work that I’d just throw in. We were only selling the servers for 50-75 each in larger lots, $125 each on a one off basis. These servers were made by Network Engines in the US and are very heavy. I also have about 75 SCSI hard drive with on board SCSI controllers. so let me know if you are interested.

    All in I (the owner) thinks its worth about $350,000 worth of equipment new, or about $14,250 on the used market, and we were looking for about $4500 for the remaining lot. I think there are a few random PCs and Laptops in the lot as well.
    Last edited by purenergypro; 09-04-2013 at 04:18 PM.


  16. Similar threads on the Scrap Metal Forum

    1. need opinions please tow truck
      By corycouch in forum Tools and Equipment
      Replies: 47
      Last Post: 05-31-2022, 09:32 PM
    2. Opinions One These Gold Connectors
      By Jeremiah in forum General Electronics Recycling
      Replies: 3
      Last Post: 08-27-2012, 10:58 PM
    3. Trying to figure it all out need opinions
      By mdelano82011 in forum Scrap Metal Questions and Answers
      Replies: 13
      Last Post: 04-01-2012, 11:50 PM
    4. Today's Run...couple opinions??
      By Bobby in forum A Day in the Life of a Scrapper
      Replies: 9
      Last Post: 08-16-2011, 08:54 AM
    5. Trying to figure out what to do; could use some opinions,,,
      By Mechanic688 in forum Tools and Equipment
      Replies: 15
      Last Post: 05-18-2011, 10:23 PM

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook