Results 1 to 15 of 15

repost of sorts: have you tried scrap exchange?

| General Electronics Recycling
  1. #1
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts

    repost of sorts: have you tried scrap exchange?

    My apologies if I am violating some forum rule, but I want to repost more or less verbatim my question I posted in another thread. I did not see any responses to it and maybe this was because it wasn't noticed in the main discussion. Or maybe there was another reason, so I guess we're about to find out...



    So... here we go. I was thinking of placing an ad on CL in the barter section. Basically, I would offer exchanging steel/shred scrap for computers. My volumes are low and I only collect computers and computer periphery so most of the steel/shred I get is from desktop chassis and the like. So I can't expect much in exchange. But then again, I don't have space or time to process a lot, so even getting half a dozen computers at once would be great. Plus it's not worth it for me to take the steel to a scrap yard myself so getting my backyard cleaned is another benefit.

    Anyway, has anyone tried advertising such an arrangement? Did it work? How did you figure out a good "exchange rate"?


  2. #2
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    might work, you will only find out by trying it.

  3. #3
    ScrappinRed's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    texas
    Posts
    709
    Thanks
    319
    Thanked 710 Times in 342 Posts
    never tried metal for computers. I have a guy I trade working hard drives for broken motherboards and broken lcd monitors. works out VERY well for me since he gives me lots of broken parts for one hard drive... when he has them. give it a shot, who knows?

  4. The Following User Says Thank You to ScrappinRed for This Post:


  5. #4
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    How did you figure out a good "exchange rate"?
    Considering that we pay from $3. to $5. per computer now how much steel is 3-5 dollars at your yards rate??
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  6. The Following 2 Users say Thank You for This Post by Mechanic688:


  7. #5
    thortek's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Scrap biz in OHIO, but I live in south Florida!
    Posts
    513
    Thanks
    153
    Thanked 425 Times in 204 Posts
    In my situations, it'd be 2 cases for one PC. Not too bad if you're getting in a stream of Free pc's to have cases on hand to trade.

    I think I'm going to try this idea and see how it goes.
    “Most people miss opportunity because it wears overalls and looks like work .” ― Thomas A. Edison

    www.thortekrecycling.com

  8. #6
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    I have a couple of computer repair guys that I do a lot of swapping with. I will trade almost even with them sometimes, and they always come back to me with their computer scrap.

    I have been working a couple of the steel guys, but no luck yet.

  9. The Following User Says Thank You to parrothead for This Post:


  10. #7
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts
    Quote Originally Posted by thortek View Post
    In my situations, it'd be 2 cases for one PC. Not too bad if you're getting in a stream of Free pc's to have cases on hand to trade.

    I think I'm going to try this idea and see how it goes.
    Let me know how it goes. Maybe it'll help me adjust my barters.

  11. #8
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts
    Quote Originally Posted by parrothead View Post
    I have a couple of computer repair guys that I do a lot of swapping with. I will trade almost even with them sometimes, and they always come back to me with their computer scrap.

    I have been working a couple of the steel guys, but no luck yet.
    So are you exchanging certain types of hardware for certain other types? Or broken/fried MBs/cards/whatever for working MBs/cards/whatever? And what do you mean by "almost even"? In weight? In quantities? Thx

  12. #9
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Quote Originally Posted by ilyaz View Post
    So are you exchanging certain types of hardware for certain other types? Or broken/fried MBs/cards/whatever for working MBs/cards/whatever? And what do you mean by "almost even"? In weight? In quantities? Thx
    Yep, basically a trade in weight. This one guy has been with me from me starting this and I have upgraded his RAM immenselly. It costs me nothing and he tests it all for me. He is a struggling kid trying to get through college, so it helps him for sure. Of course I am starting to sell a lot of that RAM now, but I upgraded his stash of RAM to all 256 or better, that he can now put out in working computers that he sells.

  13. #10
    wayne's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    UK
    Posts
    319
    Thanks
    117
    Thanked 265 Times in 127 Posts
    What about offering double the weight of a tower, but in printers? Would that work out financially? I would rather tear down a tower than a printer, every day of the week...
    I know lying is wrong, but if the elephant man came in now in a blouse with some make up on, and said, "How do I look?" Would you say, bearing in mind he's depressed and has respiratory problems, would you say, "Go and take that blusher off you mis-shapened elephant tranny?" No. You'd say, "You look nice... John""

  14. #11
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts
    Quote Originally Posted by wayne View Post
    What about offering double the weight of a tower, but in printers? Would that work out financially? I would rather tear down a tower than a printer, every day of the week...
    I am sort of doing it already: I don't take apart printers anymore, I just take out cartridges, cut off cables and toss the rest into the "barter" pile.

  15. #12
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    I am sort of doing it already: I don't take apart printers anymore, I just take out cartridges, cut off cables and toss the rest into the "barter" pile.
    Don't forget the printers with memory card slots, mid or hi grade boards in there.

  16. #13
    ilyaz started this thread.
    ilyaz's Avatar
    SMF Badges of Honor

    Member since
    Sep 2010
    Location
    MD
    Posts
    425
    Thanks
    340
    Thanked 230 Times in 114 Posts
    Quote Originally Posted by Mechanic688 View Post
    Don't forget the printers with memory card slots, mid or hi grade boards in there.
    Yeah, I sometimes takes them out and sometimes don't: they are small and I often feel they are not worth my time

  17. #14
    ScrappinRed's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    texas
    Posts
    709
    Thanks
    319
    Thanked 710 Times in 342 Posts
    Today I traded (2) 40 gig hard drives, (1) 80 gig hard drive, and (4) 512 ram for 8 towers, 5 broken lcd monitors, a crt monitor, 115 lbs of lead batteries, 3 broken hard drives, 4 floppy drives, a battery back-up, and a box of mother boards(9#). I'd say I got the better end of the deal.

    Computer repair guy who normally buys my larger hard drives and ram gave me all of his "broken" today in trade. Find something they want and trade for everything they don't need.

  18. The Following User Says Thank You to ScrappinRed for This Post:


  19. #15
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Quote Originally Posted by ScrappinRed View Post
    Today I traded (2) 40 gig hard drives, (1) 80 gig hard drive, and (4) 512 ram for 8 towers, 5 broken lcd monitors, a crt monitor, 115 lbs of lead batteries, 3 broken hard drives, 4 floppy drives, a battery back-up, and a box of mother boards(9#). I'd say I got the better end of the deal.

    Computer repair guy who normally buys my larger hard drives and ram gave me all of his "broken" today in trade. Find something they want and trade for everything they don't need.
    I would say that is a good trade.

  20. The Following User Says Thank You to parrothead for This Post:



  21. Similar threads on the Scrap Metal Forum

    1. Winter Storms for Aluminum of All Sorts
      By RecyclingSecrets in forum Scrap Metal Tips and Advice
      Replies: 2
      Last Post: 10-29-2012, 06:14 AM
    2. My Used Gift Exchange!:
      By DumbD in forum Off Topic Discussions
      Replies: 1
      Last Post: 12-24-2011, 01:50 PM
    3. Does anyone know if this is a scam of some sorts?
      By scrapdollar in forum Off Topic Discussions
      Replies: 23
      Last Post: 11-29-2011, 10:56 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook