Experienced Scrapper
Hello all, i've been reading the forum for about a month now, there is a ton of great information here i just have a few more, please. What are No Pin processors? are they the other one under the second alum heatsink beside the cpu? also are satellite receviers worth pulling the boards? thanks everyone!
No pin cpu's are like regular cpu's but no pins, instead they have small points where the pins would be. Many of the p4 machines have them. When you see one you will know it. And it is not the one under the "other" Al heat sink.
Are satellite receivers worth pulling apart, I would say yes for me they are. My time is cheap.
Please go to the introductions section and start a thread there, tell us a little about yourself.
Take the time to read through this thread, while you're at it read as much of the old threads as you can. There is lots of free information in the old threads.
http://www.scrapmetalforum.com/showt...identification
"Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}
Now go beat the copper out of something, Miked
Experienced Scrapper
thanks! i will it will just take me a while bc i have to do this on my cell phone for now
Here's couple photo's. The cpu on the left is a pinless cpu, Mike.
Do they pull right off from the motorboard or how exacly do you remove cpus?
Yes, remove the heat sink and on some lift the small lever and pull out the cpu. All the lap tops I've seen so far the cpu is soldered in and no you don't remove them. Seriously take the time to read lots of the old threads, you will profit from it. Mike.
Ive been going through them for hours! I have 3 notebook papers full of info! Love this site!
|
Like Mike said, there is a little locking lever beside the socket on most of them. And their called motherboards,,,lolOriginally Posted by ResourcefulRecycling
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
Experienced Scrapper
thanks again, i made a deal with the local yard i get all the electronics strip for the boards and give the the non ferrous and ferrous back i keep all boards, ram,finger cards,cpus all goodies i just have no clue how to grade the boards i dont keep the brown ones.
Metal Recycling Entrepreneur
You're doing great! You read and looked, took notes, and made a good deal. Glad you did all thatboardsort has a good page on boards, giving descriptions and photos. You don't want to go the route I took with them tho, and prepay shipping and wait for a check, that route takes forever! I did however appreciate their pricing, and definitions
Metal Recycling Entrepreneur
I recently broke down about 50 laptops and about 30% had soldered on chips.
Experienced Scrapper
I just was't sure about the satelitte receiver boards i just pulled around 50 this afternoon i will pull the boards tomorrow thanks again!
Experienced Scrapper
ive been pulling boards and electronics for about 2 weeks now. heres the brakdown: 46lbs. motherboards, 52lbs. telecomm boards, 7lbs. RAM,16lbs. finger cards, 2lbs HDD boards ,3lbs mixed cpus(need 2 be sorted) 4lbs cell phones i think thats it
|
|
Depending on where your located, the load is almost big enough to drive it to a buyer.
Experienced Scrapper
does anyone know what grade the boards are from the satellite receivers? low or high grade please?
Experienced Scrapper
mechanic i live in alabama does anyone know of anyone close or maybe in state?
|
|
Not sure exactly what they call them but I'm just not sure of what level, maybe a mid-grade. This buy lists them as peripheral;The Peripheral board category is for boards that do not qualify for motherboard grade, but are better than midgrade.
This includes but is not limited to such boards as DVD/CD-ROM ( CD/DVD board description), Printer boards, higher quality telephone board and cable/dvr board.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks