|
I saw this truck a coupla days ago here in Dallas. Couldn't tell if this was copper or not. Looks like it to me. The truck's suspension seems to be stressed from a lot of weight, and the trailer didn't have that arch they usually do when they're deadheading, so the load was definitely heavy.
Wonder what this was worth if it is copper?
Out of clutter, find simplicity. --Albert Einstein
|
My first guess would have been roofing material.
Recyclable Material Merchant Wholesaler
Certified Zip-Tie Mechanic
"Give them enough so they can do something with it, but not too much that they won't do nothing."
|
lol, I had to look up what copper ''anode'' is. I thought anode was a conduit, or rather a .....source? for travel through. I didn't realize it was a ''physical'' item. It does sort of look like roofing but, the copper roofing I've seen seemed to have more ''waves/dips'' in it or rather, closer together than those seem.
Scrapper, Scrap Yard Worker, Horse farm worker, Cooler Puller and just plain ''tired''
Keeper of the Cooler!
|
Heh, that's a big flatbed of copper! Was it full up Auminer?
Why don't I get deliveries like that.../whine.
Sirscrapalot - Home computers are being called upon to perform many new functions, including the consumption of homework formerly eaten by the dog. - Doug Larson
|
Anodes generally come in block form or I this case a copper basket if reverse electroplating.
Definitely looks like roofing sheeting.
|
|
I may not have used the right word, and it was hard to get a good photo driving down the interstate! LOL
They definitely had a metallic shine to them that doesn't come across in the pics.
I was wondering if they might've been the sheets of copper resulting from electrowinning. There is a company called Encore Wire just a few miles up the road in the direction this truck was headed. They're a pretty sizeable wire company, publicly traded at over $1billion market cap.
Keeper of the Cooler!
|
|
Looked like shiny copper roof tops to me.
Either way that's a cool pic. Got a few friends who OTR trucking, from flat beds to Van/reefer(No no that kinda reefer people! It's trucker speak for refrigerated..lol)
Thanks for sharing!
Sirscrapalot - Roll on 18 wheeler...roll on...- Alabama
Metal Recycling Entrepreneur
|
Weird looking stuff! Seems a little thick for roofing copper--the sheets look like about a 1/4" thick--and the edges seem kinda rough, like they were cut with a saw with about 3 teeth in it! And why are some looking vaguely like rolled tin roofing?
I know copper bus bar in electrical panels is sometimes about 1/4" thick. This might be raw sheet for some electrical manufacturer who would shear the sheets to the width of the bus bar they need. But if that was the case, why the apparent poor finishing of the sheets? It isn't easy to shear something that ain't flat.
Nice looking load, though. Wish he'd crash going by my stump ranch. "what load, ossifer? He was empty when he rolled onto my hay field!"
Jon.
Metal Recycling Entrepreneur
|
I think they are the sheets of copper that has been made from copper scrap.
They dip a thin sheet of copper into a electroplating bath & electoplate the copper onto it, it gets thicker with a bright clean bare copper metal crystal surface structure.
If you want to see this effect found a really easy way. So obvious & complety free.
Glass jar, small bunch inch long thin copper wire, a teaspoon of Copper sulphate & a solar panel off one of those solar garden lights. Some water. Something you want to electroplate onto, I used a old worn silver plated spoon.
As the bubbles come off the electroplation, they rise & the crystals form vertical lines.
--------
I don't know this for sure. but
When they do that sheet electroplating, thats when they get the rest of gold out of the copper.
What they start off with is recycled domestic copper, pipe & such.
That domestic copper, its come strait from the copper mine & been melted & made into stuff. Its been used & recycled once or twice.
They probably got most of the gold out of it in the first refining at the smelter, but not all of it. Same with some other metals like arsnic.
For the smelter to get this last bit of gold, they'd have to refine it twice, doubling their costs.
But, now they have high purity copper & its suitable of making copper electrical wire, making it worth more.... win win
Last edited by eesakiwi; 11-19-2013 at 10:00 PM.
|
|
THOSE were what I was thinking of. I saw something on, I think it was the Discovery Channell a long time ago about those plates. Wish I could've gotten a closer inspection!
Originally Posted by eesakiwi
I think they are the sheets of copper that has been made from copper scrap.
They dip a thin sheet of copper into a electroplating bath & electoplate the copper onto it, it gets thicker with a bright clean bare copper metal crystal surface structure.
There are currently 3 users browsing this thread. (0 members and 3 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks