Results 1 to 10 of 10
  1. #1
    Catfish Bob started this thread.
    SMF Badges of Honor

    Member since
    May 2011
    Posts
    133
    Thanks
    127
    Thanked 31 Times in 21 Posts

    Wanting to start a door step recycling pick up company.

    For years I've been wanting to open a small recycling company.
    The best way I see to get my name out and get many customers to start with would be to offer free pickup. This will only work because I plan on being a one man operation, no employees.

    Things needed.



    1. Customers- between family and friends I estimate I'll be able to start right out of the gate with about thirty customers. With craigslist ads and flyers I should be able to get up to a hundred. I know a huge key will be keeping my customer radius as close to my shop as possible because of gas millage. Until I'm making enough to expand.

    2. A shop- Have found on that will do to start in a great location as far as where I'll be taking my metal and paper to sell. The shop is for rent for $650 month but that could be negotiable as the owner does own the property outright.

    3. Buyers of my material. I do not have anyone to sell glass or plastic too. This has been the biggest obstacle to starting the company I have been dreaming about for years. Have considered not offering pickup of glass or plastic. Personally think that would make me illegitimate to full recycling service.

    4. Vehicle- 2004 Chevy short bed

    5. Income- My idea is to offer free curb side/ door step recycling therefore all the companies income will come from material sells. It is very hard to estimate what one household pickup would be worth in material collected. My current estimate is that the average house hold would supply $2.00 to $3.00 a week in materials. This is if I can get a buyer of glass and plastic for at least $0.05 ton.

    6. Totes for my customers to place there recyclables in.

    7.A cheap flat bed dump truck and forklift would be nice.


    Best thing I got going is that I'm in a metropolitan area of almost a million people and their is no free government recycling.

    This post is a mess. I'm tired and why I'm posting this is that I basically want other peoples tips and advice that might of gone down this same road.
    Last edited by Catfish Bob; 10-13-2014 at 06:27 AM.


  2. #2
    SMF Badges of Honor


    Member since
    Aug 2014
    Location
    Minnesota
    Posts
    120
    Thanks
    136
    Thanked 119 Times in 65 Posts
    I would start backward. Find buyers first, then if you think that you would be able to sustain a business then try to see if you can find the clients. I was looking into it before but the return wouldn't cover the rent. However your rent seems reasonable. One other thing to consider is a baler or shredder for your plastic.

  3. The Following 2 Users say Thank You for This Post by mnrecycler:


  4. #3
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Down the line maybe a 2 or 3 yard dumpster out front for people to put their recyclables in after hours. As long as people wouldn't abuse it.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  5. The Following User Says Thank You to Mechanic688 for This Post:


  6. #4
    saabsw's Avatar
    SMF Badges of Honor


    Member since
    May 2012
    Location
    Pittsburgh
    Posts
    59
    Thanks
    100
    Thanked 68 Times in 30 Posts
    Are you absolutely sure that you can make at least $650 a month? If I were you I'd get to that point first, when you can't possibly move forward without a warehouse, then worry about expanding. For now, a shed, your garage, or a small storage space should suffice until you start making money.

  7. The Following User Says Thank You to saabsw for This Post:


  8. #5
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    1,159
    Thanks
    0
    Thanked 248 Times in 169 Posts
    so what happened to the cars?

  9. #6
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    I don't know what facilities are at your house/apartment, but if you have a shed, I'd use it instead of renting. If you're out of town (No zoning covenants), make something into your office right there:



    This man made one out of the back of a box truck. The boxes can be had for $1000-2000. Throw some space heaters in, and it would be a start.

    If that fails, storage units make good workshops. And they're cheap too.

    I'd test the waters this way. If all goes well, then go big!

  10. The Following 2 Users say Thank You for This Post by matador:


  11. #7
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    I would add scrap metal and electronics to the list.

    Paper, cardboard, and plastics are much more valuable in trailer loads. I wonder if govern has brokered any of these loads....he may have an idea who buys it.

    Some companies may lease you a baler . You will ne ed 3 phase power, and probably an agreement to sell them whatever you have that they want to buy.
    Currently looking for a job in or related to scrap/recycling. Relocation is possible for the right offer.

  12. The Following User Says Thank You to MattInTheHat for This Post:


  13. #8
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    The trouble with upping the game into 'commercialville' is the hard to see part where you end up turning over thousands of dollars, and think you are making thousands of dollars.
    But the thousands of dollars you are making are being made for other peoples pockets.

  14. #9
    SMF Badges of Honor

    Member since
    Aug 2014
    Posts
    2
    Thanks
    3
    Thanked 4 Times in 2 Posts
    The problem is right now glass does not really have a market, at least to make a profit in. Much of the recovered glass is used as daily landfill cover around here (MN) #1 PET & #2 HDPE get some decent prices, but quantities typically need to be quite large. Mixed ABS (ewaste plastic) can be sold near the 1000lb pound mark. Cardboard prices are very low right now, about the only decent paper product is office paper which can draw a decent price. The issue arises with baling, moving the bales and trucking the bales. Many places will not take some of these products LTL. If they do many times minimums approach the 20k mark. On the other hand, offering a curbside/door step pickup service for recycling of metal (ferrous and non-ferrous) and ewaste etc could be a very profitable venture. Just because you are focused on a sector of the recycling services does not mean you aren't a recycling company. Good luck in your adventures. As many of us know, business ventures/ideas are extreme adventures and mistakes WILL happen and HALF of your ideas WILL fail. The ones that don't are the ones thought up after failure and reexamination of your original plans. All successful people have become successful by failing in one way or another. Keep on scrappin and the best of luck to you. Everyone here is more than willing to give advice.
    Last edited by adamschow; 10-31-2014 at 06:35 AM.

  15. The Following 2 Users say Thank You for This Post by adamschow:


  16. #10
    logansryche's Avatar
    SMF Badges of Honor


    Member since
    Sep 2014
    Location
    Jamestown, TN
    Posts
    1,215
    Thanks
    1,043
    Thanked 564 Times in 367 Posts
    Quote Originally Posted by Catfish Bob View Post
    For years I've been wanting to open a small recycling company.
    The best way I see to get my name out and get many customers to start with would be to offer free pickup. This will only work because I plan on being a one man operation, no employees.

    Things needed.

    1. Customers- between family and friends I estimate I'll be able to start right out of the gate with about thirty customers. With craigslist ads and flyers I should be able to get up to a hundred. I know a huge key will be keeping my customer radius as close to my shop as possible because of gas millage. Until I'm making enough to expand.

    2. A shop- Have found on that will do to start in a great location as far as where I'll be taking my metal and paper to sell. The shop is for rent for $650 month but that could be negotiable as the owner does own the property outright.

    3. Buyers of my material. I do not have anyone to sell glass or plastic too. This has been the biggest obstacle to starting the company I have been dreaming about for years. Have considered not offering pickup of glass or plastic. Personally think that would make me illegitimate to full recycling service.

    4. Vehicle- 2004 Chevy short bed

    5. Income- My idea is to offer free curb side/ door step recycling therefore all the companies income will come from material sells. It is very hard to estimate what one household pickup would be worth in material collected. My current estimate is that the average house hold would supply $2.00 to $3.00 a week in materials. This is if I can get a buyer of glass and plastic for at least $0.05 ton.

    6. Totes for my customers to place there recyclables in.

    7.A cheap flat bed dump truck and forklift would be nice.


    Best thing I got going is that I'm in a metropolitan area of almost a million people and their is no free government recycling.

    This post is a mess. I'm tired and why I'm posting this is that I basically want other peoples tips and advice that might of gone down this same road.
    Everything here sounds good. When I was in ny, the way they had their places set up was in a strip mall for customer conveniance. Because NY does everything by the redemption value and not by the pound, they have a bin built into a counter customers would dump their stuff into and it would then be sorted. Going this route might be beneficial for you. If you plan on setting up a building somewhere and go out and pickup from customers, that might be a bit harder to do(free or not). For bins I'd go either wal-mart or US Plastic. Reguarding a buyer. Might want to look into a yard that might take mixed glass or plastic. If not, I'd smelt em into something fancy and sell it on ebay.(I hear glass block sells pretty well).

    On the flip side, for my situation(since I handle ewaste only), I charge customers $20 a truck load to cover gas for a few days and am able to stretch my coverage out a bit(you never know if that one customer who's outside your coverage zone has connections to get you more stuff). I've found customers are ok with this and companies are better with it. I'll also be working out of a garden shed that's in the backyard because it's the perfect size to start from.

    Just my 0.02 on the matter,
    Matt


  17. Similar threads on the Scrap Metal Forum

    1. This thread is an urgent one - Recycling Start-Up Questions
      By jknapp25 in forum General - Let's talk business
      Replies: 14
      Last Post: 06-28-2014, 12:17 AM
    2. New Startup to Start Recycling E-Waste in the US
      By JustInTime in forum Off Topic Discussions
      Replies: 5
      Last Post: 06-11-2014, 05:47 PM
    3. Landed my first big pick up from a nation wide company
      By BNGBoogie in forum A Day in the Life of a Scrapper
      Replies: 4
      Last Post: 08-14-2013, 10:41 AM
    4. Roko Alloys - Aerospace Recycling Company
      By RokoAlloys in forum Introduce yourself
      Replies: 0
      Last Post: 03-26-2012, 01:57 PM

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook