Page 1 of 2 12 LastLast
Results 1 to 20 of 25
  1. #1
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts

    ATTENTION:Any one paying more then $2.50 per scrap computer needs to read this

    I read a thread the other day that stated some of you are paying $5 per for scrap computers. This got my attention since we pay only .12 per lb for mainframes and servers and are barely turning a profit. We once in a while will buy bulk computers and work stations from institutions such as schools and hospitals etc. The last load we bought were 800 Dell Omniplex 270s. I saved a few for my son and his friends to toy with so I dug one out for value analyses.

    Here are the #.

    Mother board SS @ 1.55 X 1.30 LBS $2.02

    mem gold @ ,85 per oz $1.05

    Finger cards @$3,75 per lbx $5.29 oz $1.27

    Heat sink extruded @.50 per lb x 1/4 lb $ .12

    Power supply w wire .27 per lbx2.80 $.76

    Tin .05 per lb (that's a stretch for some) $.41

    Wire if sold separately .53 per lb x 1/4 lb $.25

    cpu $.25




    sub total $6.13 If my math is correct.
    - .60 (estimate) ship, fuel etc
    TOTAL $5.53
    if YOU CAN DO 50 OF THESE A DAY YOU CAN MAKE ABOUT $26. Just sayin.

    I understand some of you sell parts, to those you will have to do a spread sheet and do your own math.

    I have a couple of other Dells and HPs I will analyze in the next day or so and will add the report here.

    EARLY HP FROM SAME BATCH UPGRADED:

    TIN 11.10 LBS X .O5 .56

    LG S MOTHER B + CD BOARD $3.51

    POWER SUP W/WIRE $ .89

    FINGER CARDS .5 OZ X $3.75 $1.17

    WIRE (DIDNT WEIGH) .15

    EXT ALU @ ,50 X 5.5 OZ .17

    MEM GOLD (UPGRADE) 1 GB 2.19 OZ $2.19

    CPU GR FIB @ $6.05 OZ 1.35 OZ .58

    SUB TOTAL $6.67

    -FUEL/SHIPPING 1.50

    SCRAP VALUE $5.17
    Last edited by EcoSafe; 03-31-2015 at 07:57 PM.
    "anyone who thinks scrappin is easy money ain't doin it right!"

  2. The Following 16 Users say Thank You for This Post by EcoSafe:



  3. #2
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    Don't forget to factor in time- to disassemble and collect, and fuel/equipment costs!

    For resale of parts (or the system as a whole), that's an entirely different game. But, if it's not a dual core machine, don't expect resalable parts.

    @OldDude- Don't forget the CPU! They're a few cents more usually. I don't have the numbers in front of me, though.

  4. The Following 3 Users say Thank You for This Post by matador:


  5. #3
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    I just bought one off a dude with a 250 GB SATA in it and (2) DDR 2 1GB sticks.. for $3 bucks.
    From some of the buyers on here I just made $13 on those two parts alone off of it.. not including what the MOBO, CPU, and rest of the 'puter will bring.

    I also turned down 2 towers from a dude that set a deal with me to sell at $3.. I got there, he jacked them to $6 each and there were no HD's or RAM in either.. I walked
    I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!

  6. The Following 8 Users say Thank You for This Post by sledge:


  7. #4
    Metalbestos's Avatar
    SMF Badges of Honor
    Buying ewaste and vintage video games

    Member since
    Mar 2014
    Location
    Baltimore md.
    Posts
    987
    Thanks
    3,114
    Thanked 1,658 Times in 707 Posts
    I don't see an hard drive on that list , do most of yours come incomplete ? I would imagine hospitals and schools may remove them prior to releasing them . Just curious as I didn't see it on the list .
    Buying ewaste and video games !

  8. #5
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    It might have been a thread from last year. The landscape is changing every couple of months so you have to change and adapt accordingly. I stopped buying altogether last fall. A few months later i resumed buying but at an average of 2.00 $ for a tower or laptop.

    All of my sources went dry this winter. There's very little coming in. Even the guys that are focused on steel, copper, & aluminum are sitting idle right now.

    For the time being: Scrap prices are low and the resource is scarce.

  9. The Following 2 Users say Thank You for This Post by Scrappah:


  10. #6
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    I have been saying this for a while seemed no one wanted to listen...........I said for a small socket tower $5 was probably about what it was worth.......Oh well people live and learn!!!!!!

  11. The Following 4 Users say Thank You for This Post by mikeinreco:


  12. #7
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Thanks for putting the numbers out there. It is always good to see the numbers reworked.

    I remember fondly when $5 was a good number. Now I can only go there if it is a really old computer. LS motherboard, several finger cards, multiple RAM, 20 pound carcass, etc.

    I only go about 2 these days for purely scrap. Taking a look at every single computer in the pile can garnish a higher price.
    "64K should be enough for anybody." - Bill Gates 1981
    http://www.treasurecoastelectronicrecycling.com/

  13. The Following User Says Thank You to parrothead for This Post:


  14. #8
    ParkerFlyer4's Avatar
    SMF Badges of Honor

    Member since
    Nov 2011
    Location
    north west
    Posts
    407
    Thanks
    423
    Thanked 524 Times in 188 Posts
    Thanks for posting this oldude. I have figured the numbers myself also. But I am glad you are showing others what the math really is.

    A few years ago the prices were much better and a bunch of people jumped on the gold fever bandwagon. Now, the reality is, you can only make good money if you buy low and work with large quantity's. I hope these numbers convince some people to drop out of taking my business.

    The biggest issue I have come across is people wanting to much for their crap. I advertise that I "pay $ for old computers" This happens all the time, People will write me saying they have 2 or 3 computers How much? I tell them and I don't hear back from them. They don't realize that my $3 is better than what they would get anywhere else.
    Last edited by ParkerFlyer4; 03-29-2015 at 11:28 PM.

  15. The Following 3 Users say Thank You for This Post by ParkerFlyer4:


  16. #9
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    You have to figure fuel and time into that price, too. Out here in Wyoming, it's 30 miles to the next town. I only serve those towns at our collection events, or for large quantities (Schools/Hospitals/Larger Businesses).

    Even paying nothing for three computers, but driving 50 miles round trip, doesn't pencil out.

    Your time and equipment has to be worth something!

  17. The Following User Says Thank You to matador for This Post:


  18. #10
    directrecycle's Avatar
    SMF Badges of Honor

    Member since
    Oct 2011
    Posts
    520
    Thanks
    95
    Thanked 467 Times in 226 Posts
    as a general rule, no. For certain computers that i have a good history of parts resale then possibly

  19. The Following User Says Thank You to directrecycle for This Post:


  20. #11
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    lol even from the start I did not pay $5 for towers that was only reserved for complete servers or fully working laptops. I pay $2 complete towers 50cents incomplete and same for laptops even at auctions at a higher price I may pay $1.25-1.30 but that's because there is usually 10 laptops or so with 40-60 towers in various shape

  21. #12
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    I think it all depends on how you work the angles. This is just a hobby for me so i re-invest all of the profits back into the project (business).

    The net profit on just one refurb last year was more than enough to pay for forty towers @ 5.00 $ ea. Those towers yielded enough source parts for eight more refurbs plus over 100 lbs of e-waste so it builds on itself

    All my sources are within a ten mile radius of the shop and i usually hit them while i'm on the way to doing something else so it's not a major vehicle expense.

    The main reason that i went to 2.00$ per unit was because the scrapers i'm buying from felt 5.00$ was a bit high in light of dropping scrap prices.

    That's cool ...

  22. #13
    ParkerFlyer4's Avatar
    SMF Badges of Honor

    Member since
    Nov 2011
    Location
    north west
    Posts
    407
    Thanks
    423
    Thanked 524 Times in 188 Posts
    How can you still win these auctions travistemple? My experience with auctions is the same everytime i bid, i drop out as soon as it reaches $3 -$4 per unit. And the price continues to rise after that. How are people making money on these? Resale and refurb i suppose. I would like to hope that they are making money, instead of ignorantly taking my business and enevidably loosing theirs.

  23. The Following User Says Thank You to ParkerFlyer4 for This Post:


  24. #14
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    Summary: If you are buying computers just for the scrap value, then either pay REALLY low or find another job. If you are looking to build a business, then you may need to pay more for the computers to get in the door (loss leader mentality). This will open worlds of opportunity for you with other equipment provided you are in a good market and not out in the middle of the Yukon or similar. The information regarding the breakdown is relatively good, but its only 1 part of a much larger equation. For those of you depending on a scrap computer to pay the bills, you need to get them cheap or free.

  25. The Following User Says Thank You to Ecycle Atlanta for This Post:


  26. #15
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Quote Originally Posted by shendog View Post
    Summary: If you are buying computers just for the scrap value, then either pay REALLY low or find another job. If you are looking to build a business, then you may need to pay more for the computers to get in the door (loss leader mentality). This will open worlds of opportunity for you with other equipment provided you are in a good market and not out in the middle of the Yukon or similar. The information regarding the breakdown is relatively good, but its only 1 part of a much larger equation. For those of you depending on a scrap computer to pay the bills, you need to get them cheap or free.
    How goes it Shendog

  27. #16
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    I switched over to .15 a lb. from straight 3.50 per. I figure that if someone pulls a few parts out then it'll weigh less and I pay less. A fully loaded older one is heavier and costs a little more. I got tired of paying 3.50 for one that was half empty. My prices I'm paying works out from 1.50 to about 3.00.

  28. The Following 4 Users say Thank You for This Post by Mechanic688:


  29. #17
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    Quote Originally Posted by ParkerFlyer4 View Post
    How can you still win these auctions travistemple? My experience with auctions is the same everytime i bid, i drop out as soon as it reaches $3 -$4 per unit. And the price continues to rise after that. How are people making money on these? Resale and refurb i suppose. I would like to hope that they are making money, instead of ignorantly taking my business and enevidably loosing theirs.
    Have you thought about increasing your skill level ?

    The reason I ask is because I see the leavings of a number of the local scrappers. They're scrounging for pennies and missing the dollars completely. It's a shame because the guys that are doing straight breakdowns are trashing the resource for those of us who have invested the time & effort to learn.

    It's useless to point fingers and create a lot of infighting. Nobody benefits from this. It only creates bitterness.

    Wouldn't it be better for you to get five bucks for a refurbishable computer by putting in the hands of somebody that knows what to do with it ?

    Better yet ... up your game and make 50 - 100 bucks per unit on the few that can be rebuilt ?

    Even better ... re-invest all of your profits and grow the business exponentially ?

    I'm being a bit more straightforward than usual but I really think that it's not your competition for the resource that's holding you back. Competition is a good thing.

  30. The Following User Says Thank You to Scrappah for This Post:


  31. #18
    ParkerFlyer4's Avatar
    SMF Badges of Honor

    Member since
    Nov 2011
    Location
    north west
    Posts
    407
    Thanks
    423
    Thanked 524 Times in 188 Posts
    I understand that. Im doing just fine without dealing with auctions. I just dont understand how he is winning auctions at $2 per unit or less. All auctions around me go to a minimum of $5 per unit before they end.
    Last edited by ParkerFlyer4; 03-31-2015 at 01:19 PM.

  32. #19
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    Region has a lot to do with auction pricing. Auctions here for big lots,5-20 pallets there is usually a minimum starting bid of $2500 and it goes up from there. These lots also have 50-250 crt monitors included. Most are near port citys and it states that buyermust remove with a 48 ft trailer or sea container, so you know whoever buys them they are going right onto a ship going over seas.
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  33. #20
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    the money is not really in the scrap.........Sold two vintage cards yesterday for $120 total..........That could be considered better than scrap

  34. The Following 3 Users say Thank You for This Post by mikeinreco:



  35. Similar threads on the Scrap Metal Forum

    1. Scrap Metal Beginners - Read This First
      By admin in forum Beginners Start Here - Metal Recycling Basics
      Replies: 5
      Last Post: 10-05-2022, 03:49 PM
    2. Scrap Metal Forum newcomers - Please Read!
      By admin in forum Introduce yourself
      Replies: 0
      Last Post: 09-30-2011, 06:54 PM
    3. Paying for scrap?
      By fightingamecox in forum Introduce yourself
      Replies: 2
      Last Post: 08-08-2011, 04:49 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook