Page 1 of 2 12 LastLast
Results 1 to 20 of 24

cost of setting up an ewaste plant

| General - Let's talk business
  1. #1
    msmoorad started this thread.
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts

    cost of setting up an ewaste plant

    im trying to convince a few wealthy guys i know, to invest in an ewaste plant in Durban.



    currently, almost all the ewaste generated in South Africa gets shipped out to Europe etc for extracting & refining the precious metals

    what id like to know is approx how much would it cost to set up an operation like that?

    Durban is a big city- around 3.5 million inhabitants within its greater area & since theres nothing really like this in the country, im sure that stuff from other cities will come to this plant.

    pls advise.

    this is all hypothetical at this stage but im hoping something comes of it- so i can get myself a decent, stable job.
    Last edited by msmoorad; 07-30-2017 at 08:06 AM.


  2. #2
    SMF Badges of Honor

    Member since
    Oct 2013
    Location
    Missouri
    Posts
    99
    Thanks
    18
    Thanked 82 Times in 45 Posts
    The sky is the limit on what it could cost. I was talking to a company that is growing by leaps and bounds. They told me that you could spend 3 to 4 million. For a smaller set up .

  3. #3
    msmoorad started this thread.
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts
    from what i see/know... money is NOT a problem at all- i just want to be sure that i know what im taking about when i make my pitch.

    local govt & natl govt will most likely be involved because this will lead to job creation & cleaning up the environment.

  4. #4
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    I have no idea what the cost would be overall, but I would think the the two biggest costs out of the gate will be land / plant acquisition and equipment. If you choose to lease an existing facility, that would eliminate the cost of buying land and building a facility. On the equipment side, that would depend on the type of operation you will be running. In general, you will be receiving material, processing material, and selling material. Each of these processes will have several sub-components (for example, receiving material: will you have your own vehicles hauling material? Buy those vehicles or lease them? Hire third party haulers?, etc.). The processing part will be the most expensive I would think because depending on what you're doing (and the scale), this could involve millions of dollars.

    Also, you will want to keep in mind you will need some money to fund operations ("working capital") for a period of time until you generate cash flow sufficient to operate. Beyond just the costs of plant and equipment, therefore, you will need some additional funds.

    With no other facility in the entire country, it sounds like one hell of an opportunity, and worth your time to work on a business plan.

  5. The Following User Says Thank You to Swampy for This Post:


  6. #5
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,591
    Thanked 7,218 Times in 2,256 Posts
    Given the information you have provided, I would PM ewasted immediately for his insight, expertise, and contacts. Given the size and scope of your dream, his consulting fees would be minimal compared to the profit potential you could foresee in this endeavor. A public forum is not the place to discuss the secrets of a business plan, other consultants needed, and the benefits of working with the local and country governments. I would be happy to share my insights in PM's.

    Since you posted this idea on a public forum, you are under a time crunch as others may try to steel your idea. This is not something you want to sit around and dream about, you need to get after it ASAP. Good luck.
    Give back more to this world than we take.

  7. The Following 3 Users say Thank You for This Post by Patriot76:


  8. #6
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,168
    Thanks
    632
    Thanked 2,503 Times in 1,138 Posts
    Quote Originally Posted by msmoorad View Post
    im trying to convince a few wealthy guys i know, to invest in an ewaste plant in Durban.

    currently, almost all the ewaste generated in South Africa gets shipped out to Europe etc for extracting & refining the precious metals

    what id like to know is approx how much would it cost to set up an operation like that?

    Durban is a big city- around 3.5 million inhabitants within its greater area & since theres nothing really like this in the country, im sure that stuff from other cities will come to this plant.

    pls advise.

    this is all hypothetical at this stage but im hoping something comes of it- so i can get myself a decent, stable job.
    Your money bunnies would have already picked up on your lack of knowledge, they'll hire a consultant, build the plant and maybe just maybe hire you as the night janitor.

    Should have done your research before opening the barn door.

    At this time is just hypothetical, but I've been down that road.

    Wanted to build a plant to remove the plastic insulation from telephone cable, you know the large cables about 2 to 3 inches in diameter with hundreds of wires inside. Just so happens that MEK ( Methyl Ethel Ketone ) dissolves the plastic.

    The copper wire would have been placed inside a vessel capable of holding several tons, air evacuated then a nitrogen atmosphere introduced before adding the MEK, if the solvent became to saturated to hold more solids then it would be drawn off into another vessel for distillation to recover the MEK.

    A saturated MEK solution would have been replaced wiht a fresh load, of this fresh charge was not completely saturated when the copper was eventually cleaned of plastic this charge would have been reintroduced into the next load of copper wire.

    Instead of distilling the discharged MEK, some of or all of the byproduct dissolved plastic could have been packaged and sold as PVC cement used for joining PVC pipe. Had the MEK been distiled for recovery the plastic resins left behind could have been resold.

    My brain is not functioning very well, perhaps I'll finish this story another day.

    Good luck with your e-waste plant.

    Last edited by alloy2; 07-31-2017 at 02:17 AM.

  9. The Following 2 Users say Thank You for This Post by alloy2:


  10. #7
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    Your money bunnies would have already picked up on your lack of knowledge, they'll hire a consultant, build the plant and maybe just maybe hire you as the night janitor.

    Should have done your research before opening the barn door.



    You post a lot of things that are just obnoxious. If you're so smart, why don't you share something useful instead of being a @$$hole?

  11. The Following User Says Thank You to Swampy for This Post:


  12. #8
    msmoorad started this thread.
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts
    nah, i dont care either way
    im VERY thick skinned

    and i dont think he meant to insult me
    just the way he is
    speaks his mind

    anyways, back to business
    i found out that there are ewaste extracting & refining facilities in the country but they are small and located in the Johannesburg area
    which is about 650kms away.

    lets see what happens...

    if it doesnt work out, life goes on
    its not the end of the world

  13. The Following 4 Users say Thank You for This Post by msmoorad:


  14. #9
    armygreywolf's Avatar
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Germantown, WI
    Posts
    1,084
    Thanks
    193
    Thanked 2,064 Times in 649 Posts
    3.5 million people, you would be more likely to come across small appliances AND computers, so being able to profitably deal with both is in your best interest.

    You will need 3 things immediately. A building able to house 30-60 days worth of incoming material from a major metropolis like your area. Two you need a tear down area, fully equipped with the best and fastest tools available, and the people to man it. You will need racking, pallets, gaylords, forklifts, scales etc for this area as well as an inventory management system. 3 is a big one. Machinery. Once youve determined your product OUTPUTS you can purchase machines 100% over that number for processing. shredders, separators, granulators, balers, etc. You will need to sign contracts with scrap yards too, and they will require material be spec'd accordingly. Wire chopping is likely in your arena at that size, a good chop line can cost in excess of 1 million USD.

    But you heard it from me, I've built two companies for this purpose now. Stagnant inventory is what will cost you, build up and build out to handle ALL your dismantling and seperating needs, it's an intensive process and no, for the most part it cannot be done solely by machines.
    WI ITAD LLC, IT Liquidation Services, we remarket, buy and sell scrap electronics No customer too large or small!

  15. The Following 3 Users say Thank You for This Post by armygreywolf:


  16. #10
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,168
    Thanks
    632
    Thanked 2,503 Times in 1,138 Posts
    Quote Originally Posted by msmoorad View Post
    nah, i dont care either way
    im VERY thick skinned

    and i dont think he meant to insult me
    just the way he is
    speaks his mind

    anyways, back to business
    i found out that there are ewaste extracting & refining facilities in the country but they are small and located in the Johannesburg area
    which is about 650kms away.

    lets see what happens...

    if it doesnt work out, life goes on
    its not the end of the world
    Might be worth the price of a plane ticket, first arrange fro a tour of a e-waste plant.


    If they'll allow pictures take many, take noted and make sure your pocket recorder is on.

    A fellow from Germany started up Exnor a company that specializes in e-waste and refining in Winkler Manitoba, some background on the community, it's hugely populated with Minnonights of yes German ethnicity. So right off the batt you know the company didn't land there by chance.

    Dealing with people of a similar background and language paved the road for permits, Winnipeg a much larger city a stone through away, had our entrepreneur tried to establish his operation there would be still tied up in red tape.

    Exner E-Waste Processing inc.

    I think that Exner would be a good study, compute the total floor space, the receiving area, equipment used and placement. Not sure if Exner refines in house or sends the cons out, if I were you I would consider sending the concentrates out for refining done outside with a coper refinery this will give you a bit of leeway with your financiers. As it will give your money guys some outside accountability.

    Your concentrates at the end of the final process will be about 95% copper the remainder precious metals and for this reason best to have a copper refinery do the refining, I believe there is a large copper refinery in Africa, A lot of catalytic converters are shipped from North America to one of the copper smelters in Africa, the converters are added to the smelt, the copper acts as a collector for the precious metals.

    Back to the Exner plant, now that you have the square footage and layout time to do a spreadsheet get your ducks lined up, make a powerpoint presentation that will hammer your point. Make sure each investor has a copy.

    Now for the important stuff, compute your start up costs then amortize your equipment, the building lease, employee wages and benefits, office supplies, vehicles ( purchase or lease ) waste disposel etc. then .go to kitco for historical graphs for copper, gold, silver, platinum, palladium etc. You'll be at the mercy od how volatile the markets have performed you'll need to establish a baseline.

    Once your satisfied with the numbers you'll be able to give your investors an idea on what to expect for yearly return on their investment.

    If at all possible find a retired business mentor to coach you Home
    Last edited by alloy2; 07-31-2017 at 03:03 PM.

  17. The Following 2 Users say Thank You for This Post by alloy2:


  18. #11
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,168
    Thanks
    632
    Thanked 2,503 Times in 1,138 Posts
    Quote Originally Posted by Swampy View Post
    Your money bunnies would have already picked up on your lack of knowledge, they'll hire a consultant, build the plant and maybe just maybe hire you as the night janitor.

    Should have done your research before opening the barn door.



    You post a lot of things that are just obnoxious. If you're so smart, why don't you share something useful instead of being a @$$hole?
    I qualify both for being obnoxious and an @$$hole, a status that isolates me from ignorant people.

  19. The Following 5 Users say Thank You for This Post by alloy2:


  20. #12
    msmoorad started this thread.
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts
    Quote Originally Posted by alloy2 View Post
    Might be worth the price of a plane ticket, first arrange fro a tour of a e-waste plant.


    If they'll allow pictures take many, take noted and make sure your pocket recorder is on.

    A fellow from Germany started up Exnor a company that specializes in e-waste and refining in Winkler Manitoba, some background on the community, it's hugely populated with Minnonights of yes German ethnicity. So right off the batt you know the company didn't land there by chance.

    Dealing with people of a similar background and language paved the road for permits, Winnipeg a much larger city a stone through away, had our entrepreneur tried to establish his operation there would be still tied up in red tape.

    Exner E-Waste Processing inc.

    I think that Exner would be a good study, compute the total floor space, the receiving area, equipment used and placement. Not sure if Exner refines in house or sends the cons out, if I were you I would consider sending the concentrates out for refining done outside with a coper refinery this will give you a bit of leeway with your financiers. As it will give your money guys some outside accountability.

    Your concentrates at the end of the final process will be about 95% copper the remainder precious metals and for this reason best to have a copper refinery do the refining, I believe there is a large copper refinery in Africa, A lot of catalytic converters are shipped from North America to one of the copper smelters in Africa, the converters are added to the smelt, the copper acts as a collector for the precious metals.

    Back to the Exner plant, now that you have the square footage and layout time to do a spreadsheet get your ducks lined up, make a powerpoint presentation that will hammer your point. Make sure each investor has a copy.

    Now for the important stuff, compute your start up costs then amortize your equipment, the building lease, employee wages and benefits, office supplies, vehicles ( purchase or lease ) waste disposel etc. then .go to kitco for historical graphs for copper, gold, silver, platinum, palladium etc. You'll be at the mercy od how volatile the markets have performed you'll need to establish a baseline.

    Once your satisfied with the numbers you'll be able to give your investors an idea on what to expect for yearly return on their investment.

    If at all possible find a retired business mentor to coach you Home
    the part in bold is EXACTLY what i was thinking about


    just got a promising response from a govt owned corp today- the main guy in charge of recycling asked me to send in my CV/resume
    these guys have HUGE budgets.

    i had emailed him and quite a few senior ppl in local & natl govt a few days ago
    introduced myself & explained that i have lots of ideas about recovering precious metals from ewaste but no way to act upon them.

  21. #13
    auminer's Avatar
    SMF Badges of Honor



    Member since
    Nov 2012
    Location
    Allen, TX
    Posts
    1,233
    Thanks
    579
    Thanked 2,301 Times in 857 Posts
    BAH!!!

    I need your ""money bunnies"" here in Dallas-Ft.Worth.

    I'm finding out that DFW is THE SUCK for ewaste buyers. It's a sad day when I'll get just about the same in my pocket at the end of the transaction shipping ~1000 pounds of boards to Ohio as I would driving that same 1000# to the very highest paying buyer I can find within 100 miles of a 7 million person metropolitan area. Most buyers I've called today pay barely over half what the buyer in Ohio pays for the exact same boards.

    Actually, perhaps I shouldn't post this, as he might well lower his pricing in response.

    Sad, but if I could regularly put together enough to fill a trailer, I could quit my day job & just haul PCBs from DFW to Cleveland.
    Out of clutter, find simplicity. --Albert Einstein

  22. The Following 2 Users say Thank You for This Post by auminer:


  23. #14
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,921 Times in 785 Posts
    Quote Originally Posted by auminer View Post
    BAH!!!

    I need your ""money bunnies"" here in Dallas-Ft.Worth.

    I'm finding out that DFW is THE SUCK for ewaste buyers. It's a sad day when I'll get just about the same in my pocket at the end of the transaction shipping ~1000 pounds of boards to Ohio as I would driving that same 1000# to the very highest paying buyer I can find within 100 miles of a 7 million person metropolitan area. Most buyers I've called today pay barely over half what the buyer in Ohio pays for the exact same boards.
    Same here in Las Vegas. The yards here will only take motherboards and not at a good price. No one else will pay anything at all for them.

  24. #15
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,168
    Thanks
    632
    Thanked 2,503 Times in 1,138 Posts
    After the Japanese were defeated in WWII and the country was struggling to get back on her feet. They had sent delegates to American factories to observe to inner workings. It was later found that the delegates had been equipped with special soft soled shoes designed to pick up metal particles from the shop floors.

    The metal particles latter examined for alloy composition.

    Remember all is fair in love and war.

  25. #16
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    This American had a lot to do with the Japanese manufacturing revival. One of the most impressive people I have known of actually.

    https://en.m.wikipedia.org/wiki/W._Edwards_Deming

    This guys another one

    https://en.m.wikipedia.org/wiki/Orde_Wingate

    And..
    https://en.m.wikipedia.org/wiki/James_A._Michener

    https://en.wikipedia.org/wiki/Clifford_B._Hicks
    Last edited by eesakiwi; 08-01-2017 at 03:48 AM.

  26. #17
    msmoorad started this thread.
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts
    at the end of it all
    if all i get is a decent, stable permanent job, then i still will be better off than i am right now.
    i dont care if someone "steals" all my ideas etc bcos right now thats all they are- ideas

    at least this way i get paid more than im currently earning & i get to see my ideas in action & hopefully become a part of something exciting.


    by the way- you guys get paid more than double(i mean that literally) what we guys get paid for ewaste here in South Africa
    ive been working out the prices that ewasted posts.

    i wonder who is making all the money in the ewaste field here in SA.

  27. The Following 3 Users say Thank You for This Post by msmoorad:


  28. #18
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    Quote Originally Posted by alloy2 View Post
    I qualify both for being obnoxious and an @$$hole, a status that isolates me from ignorant people.
    Nope, it puts you right in their midst.

  29. The Following User Says Thank You to Swampy for This Post:


  30. #19
    Trigger's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    USA
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by msmoorad View Post
    at the end of it all
    if all i get is a decent, stable permanent job, then i still will be better off than i am right now.
    i dont care if someone "steals" all my ideas etc bcos right now thats all they are- ideas

    at least this way i get paid more than im currently earning & i get to see my ideas in action & hopefully become a part of something exciting.


    by the way- you guys get paid more than double(i mean that literally) what we guys get paid for ewaste here in South Africa
    ive been working out the prices that ewasted posts.

    i wonder who is making all the money in the ewaste field here in SA.
    Send me a message. I can help you with your ewaste projected business startup.

  31. #20
    msmoorad started this thread.
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts
    Quote Originally Posted by Trigger View Post
    Send me a message. I can help you with your ewaste projected business startup.
    thanks for the offer.
    let me reach a stage where i know for sure 100% that somethings gonna happen- no sense getting too excited all for nothing.


  32. Similar threads on the Scrap Metal Forum

    1. This thread is an urgent one - Electrical Wire from Petroleum refinery plant
      By gelsy in forum Scrap Metal Questions and Answers
      Replies: 4
      Last Post: 02-14-2015, 02:29 PM
    2. Scrap Removal from an Industrial Plant
      By Ytownsteelman in forum General - Let's talk business
      Replies: 5
      Last Post: 08-31-2014, 05:50 PM
    3. This thread is an urgent one - we are setting records !!!!!! :)
      By corycouch in forum Off Topic Discussions
      Replies: 3
      Last Post: 05-08-2013, 10:32 PM
    4. Chrysler Stamping Plant demolition video
      By PistoneScrapProcessing in forum General - Let's talk business
      Replies: 0
      Last Post: 05-24-2012, 10:57 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook