Results 1 to 17 of 17

New guy

| Introduce yourself
  1. #1
    spike started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    United States
    Posts
    41
    Thanks
    68
    Thanked 33 Times in 14 Posts

    New guy

    Just joined and ready to receive help from all you experts , 62 years old retired HVAC .. I wish i would of saved all those old AC units i threw out.lol I have a truck and want to get a trailer. What size should i get. I'm just going to go around all the side streets looking for metal.Thank You


  2. The Following User Says Thank You to spike for This Post:



  3. #2
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    welcome from iowa and I would wait until you get a good set up going first before buying but also get as much as you can now while people are just leaving it like fellow scrappers if you start good and hard right now you will pull ahead fast and while hvac experience you know a lot more what to get and sell

  4. The Following 2 Users say Thank You for This Post by travistemple202020:


  5. #3
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,591
    Thanked 7,218 Times in 2,256 Posts
    No matter what size of trailer you get, it will be too small. I would get the biggest trailer you can based on your comfort level towing it, the type of traffic you will be dealing with, and storage space. My first trailer was a Sears collapsible, made one out of a pick up bed, next built one out of a two horse trailer, then one out of a stock trailer, and now even have two gooseneck flatbeds. I wish I would have started with the stock trailer and larger flat bed and saved a lot of time and expense. Good luck and welcome to the forum.

  6. The Following 4 Users say Thank You for This Post by Patriot76:


  7. #4
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Welcome from Maryland. Lots of information in old threads. Good luck.

  8. The Following 2 Users say Thank You for This Post by junkfreak:


  9. #5
    spike started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    United States
    Posts
    41
    Thanks
    68
    Thanked 33 Times in 14 Posts
    I'm thinking a 16 foot to start..My truck is still nice looking and want to keep it that way as long as I can.lol

  10. #6
    Jacvip's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Cincinnati - ish, Ohio
    Posts
    19
    Thanks
    50
    Thanked 12 Times in 7 Posts
    Welcome,

  11. The Following User Says Thank You to Jacvip for This Post:


  12. #7
    magnet's Avatar
    SMF Badges of Honor


    Member since
    Oct 2014
    Location
    Austin, Texas
    Posts
    59
    Thanks
    489
    Thanked 47 Times in 22 Posts
    Welcome to the forum you will find a lot of good info here. Read and you will prosper

  13. The Following User Says Thank You to magnet for This Post:


  14. #8
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Welcome to the forum. I suggest you take your time and explore what is in the forum, seriously a Masters degree in scrapping/recycling/repurposing/reselling. Then get out and pick some metal and discover the direction you will take.

    I assure you many members of this forum have changed the direction of their business after spending time studying the free material here. Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  15. The Following 5 Users say Thank You for This Post by miked:


  16. #9
    spike started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    United States
    Posts
    41
    Thanks
    68
    Thanked 33 Times in 14 Posts
    Thanks to all, I have been deep in the forum and found great info..

  17. #10
    spike started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    United States
    Posts
    41
    Thanks
    68
    Thanked 33 Times in 14 Posts
    Got to tell you a story, just got back from scrapping. found a airtight fireplace and had to run back home to get a couple of 2x6 to slide it up in to my truck,crazy heavy but I got it after ripping my shin open a little..the funny part is I'm also digging through there garbage can after I see a 2 foot piece of copper pipe sticking out and im looking for more..felt kind of weird doing that with people watching..lol I'm sure that weird feeling will go away after I get my first check

  18. #11
    bigburtchino's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    California
    Posts
    1,647
    Thanks
    4,388
    Thanked 2,835 Times in 1,132 Posts
    Welcome Spike glad to have your experience here at SMF. Spike the name is what got my attention I used to know a girl, that went by that name, so I'll have to get her image out of my little head!

  19. The Following 2 Users say Thank You for This Post by bigburtchino:


  20. #12
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Nebraska
    Posts
    512
    Thanks
    521
    Thanked 812 Times in 311 Posts
    Welcome from Nebraska, Mr Spike. Glad to see some more ''old guys'' on here. I was 4 when you were born. Do you live in any particular part of the USA that you'd like to disclose? Happy Scrappin !!

  21. The Following User Says Thank You to Yunkman for This Post:


  22. #13
    spike started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    United States
    Posts
    41
    Thanks
    68
    Thanked 33 Times in 14 Posts
    Was she 6'2'' 260 lbs a full beard and have US Army Infantry Tattoos ..that's me..should help you get the Image out of your head now..LOL

  23. The Following 2 Users say Thank You for This Post by spike:


  24. #14
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Indiana
    Posts
    273
    Thanks
    177
    Thanked 154 Times in 87 Posts
    Welcome Spike. With your HVAC experience, I'm sure you have met a lot of people. Maybe have some connections, ASK, ASK, ASK. To take there scrap off there hands. You may be surprised of what will be given to you. Good Luck man

  25. The Following User Says Thank You to Ace for This Post:


  26. #15
    spike started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    United States
    Posts
    41
    Thanks
    68
    Thanked 33 Times in 14 Posts
    I live in Clarkston Michigan, been reading lots of old post and taking notes so I can get a game plan together on how to ask and get scrap..went to a Sheet medal shop today that I use to deal with, took them some nice Donuts and they loaded my truck with about 200 lbs of scrap metal, all they had.. happy happy

  27. #16
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Make up or buy some "business" cards and all your contacts and anyone you meet (friends also) should get one. like I've said before, you never know which one may be sitting on a "gold mine". Your contacts may talk to others and on and on. That's called networking, and it'll take a while to really cultivate a steady stream of misc. scrap. Don't turn your back on electronics as they have value also.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  28. The Following User Says Thank You to Mechanic688 for This Post:


  29. #17
    spike started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    United States
    Posts
    41
    Thanks
    68
    Thanked 33 Times in 14 Posts
    Good advice, Thanks



Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook