Results 1 to 8 of 8

New Guy

| Introduce yourself
  1. #1
    CaptHair started this thread.
    SMF Badges of Honor

    Member since
    Mar 2012
    Location
    South Carolina
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts

    New Guy

    Hey everyone!

    My names Jeff, and just stumbled upon the site. I've skimmed the forums so far and really like what I see and a wealth of information on the scrapping game.



    A little background on myself, I'm 21 and newly independent (finally left the parents) and am currently working musician down in Charleston, SC.

    I got interested in scrapping just trying to make a little extra income. It started collecting the tons of beer cans from my friends houses after parties and taking them down to the recycling center at the end of every week. I had no idea there was so much money at least to me for scrapping, just scrapping all the cans as allotted me an extra $40 or so a week...yes we're alcoholics

    I haven't yet dived into anything else, I've been researching scrapping copper and other metals from tvs and other electronics. It's really sparked my interest and am looking to get into it as maybe a part time venture to make a decent income on the side.

    Any advice starting out would be appreciated! Looking forward to getting to know everyone!


  2. #2
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Welcome to the forum and here's to not getting so desperate that you start scrapping equipment. Best advise I could give is to grab a forty and start reading the old posts.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  3. The Following User Says Thank You to KzScrapper for This Post:


  4. #3
    CaptHair started this thread.
    SMF Badges of Honor

    Member since
    Mar 2012
    Location
    South Carolina
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Man I hope not lol. Though I can't lie I have ripped apart plenty of broken amps for parts to build custom pieces. Maybe I can scrap the left overs

    And sounds good, I've been reading through everything for the past couple hours. One issue it looks like I'm going to run into is that I have to have a permit issued from your local sheriff here in SC to scrap copper, they're free, I just don't know if they pretty much give them out to anyone or if I may hit a snag with that. We'll see tomorrow, going to mosey on down there and see what's up.

    Thanks for the welcome!

  5. #4
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    I haven't yet dived into anything else, I've been researching scrapping copper and other metals from tvs and other electronics.
    If your going to do TV's and monitors please read up on how to properly dispose of the tubes. Someone mentioned crushing them and I had to grit my teeth. Once you break them you are creating a hazardous waste. Other than that, figure out what you'd like to scrap or whats available. Welcome
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  6. The Following User Says Thank You to Mechanic688 for This Post:


  7. #5
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    Quote Originally Posted by Mechanic688 View Post
    If your going to do TV's and monitors please read up on how to properly dispose of the tubes. Someone mentioned crushing them and I had to grit my teeth. Once you break them you are creating a hazardous waste. Other than that, figure out what you'd like to scrap or whats available. Welcome
    I got to looking for that Goodwill recycling thing locally, found there's about ten stores in my district, and emailed the headquarters for it, asking if they had a recycling program here for picture tubes from TVs and monitors. Got an email back the same day from the regional manager saying yes they do, but i haven't asked any specifics, guess i'll save that for the nearest store

  8. #6
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by Bear View Post
    I got to looking for that Goodwill recycling thing locally, found there's about ten stores in my district, and emailed the headquarters for it, asking if they had a recycling program here for picture tubes from TVs and monitors. Got an email back the same day from the regional manager saying yes they do, but i haven't asked any specifics, guess i'll save that for the nearest store

    I took my first 6 in after being told they would take them stripped, now they say to leave them intact. So I'm gonna pull the wiring and yoke and leave the circuit board (it's low grade anyway) and put the back on it.

  9. #7
    happyscraper's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    spring hill,fl
    Posts
    2,864
    Thanks
    350
    Thanked 1,371 Times in 847 Posts
    welcome to the forum Capthair. Lrt me give you your lesson on scrapping. To most of us on this forum scrapping is not a game it is the way we make a living. before you start scrapping electronics please learn what to do with the waste because some of it is toxic, stick with the cans and other metals first, thats just my advice. Good luck and hope to hear from you soon.

  10. #8
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Quote Originally Posted by Mechanic688 View Post
    I took my first 6 in after being told they would take them stripped, now they say to leave them intact. So I'm gonna pull the wiring and yoke and leave the circuit board (it's low grade anyway) and put the back on it.
    Have a good look around the circuit board first, get to know it, some have a fair bit of Cu wire on them, enough to push 2Lb up to 1Kg...... (one hundred grams...)


  11. Similar threads on the Scrap Metal Forum

    1. new guy
      By hallthomas89 in forum Introduce yourself
      Replies: 4
      Last Post: 03-17-2012, 11:08 PM
    2. New Guy
      By GoodTimeCharlie in forum Introduce yourself
      Replies: 3
      Last Post: 02-05-2012, 05:37 PM
    3. Hi! Another new guy here
      By torch_guy in forum Introduce yourself
      Replies: 8
      Last Post: 10-27-2011, 08:46 PM
    4. New Guy Here
      By Woody in forum Introduce yourself
      Replies: 4
      Last Post: 10-26-2011, 12:36 PM

Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook