Experienced Scrapper
Hey guys. Tearing apart a control unit from an Electrical Discharge Machining unit I've come across a couple of boards like this. Seems to me its just green board material with a handful of slots kinda like a backplane, by time i remove the steel. Im assuming this qualifies as "low grade" Yet it still has a few gold plated connectors. So my thought is should I seperate the connectors from the board?
|
That board would either go as midgrade, fingercard/wo fingers, or green motherboard price depending on who your selling to and whos grading that day. It has enough gold pins in the connectors to make midgrade at the bare minimum.
I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE
Metal Recycling Entrepreneur
I'd break the plastic part off one of those so the gold shows. Definitely remove the metal
|
|
If you remove the gold the board will have to go as midgrade. If you leave it on you have a good chance at a higher grade. Im thinking its would basically be same as a riser card without fingers. You pull the connectors off your gonna get $2 pound for connectors and $2 pound midgrade board.
Experienced Scrapper
So simply being a green board makes it not "low" grade? Im very new to this. Expected since there wasnt any pretty IC's populating the board it was next to worthless =)
|
Can you post a picture of the other side?
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist
NEWBS READ THIS THREAD ABOUT REFINING!!!!
http://www.scrapmetalforum.com/off-t...ning-read.html
Experienced Scrapper
Sure thing...Originally Posted by BRASSCATCHER
|
|
Thanks, i wanted to see what the rear looked like to see if there was any heavy gold plating on the back, which there isnt. If it were me i would not remove the connectors. I can sell that board to my buyer and get motherboard pricing. If i pull the connectors i get low grade. If you pull the connectors your taking the only thing that has worth from the board and may down grade the board for whoever you are selling to. The best advice is to ask your buyer what he pays with or without them on. If your a "pin puller" and have enough to make it worth your while then pull away. Before anyone questions it i stated "My Buyer" gives me motherboard pricing for reasons that me and my buyer have agreed upon.
Last edited by BRASSCATCHER; 12-08-2012 at 11:02 PM.
Experienced Scrapper
You should be able to get rid of those for back plane prices. At LEAST a peripheral board price. At the absolute minimum a mid grade price, but I would try to sell those to a bulk buyer as back planes.
There are currently 6 users browsing this thread. (0 members and 6 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks